Quite suddenly I'm having real problems with Save As. (I haven't installed the service pack yet, having read Foster's dire warnings).
Yesterday, Coreldraw crashed 3 times on saving - resulting in a lot of work being lost and an unusable file. Today I received the attached message even though there was no other 'process' or program open.
I've tried F8 and repair.
I try to Save For Web, the whole ap closes with no error message or anything. The optimization screen comes up as normal (where you select gif, jpg etc), but when I hit Save, the whole prog just disappears!
I've searched the forums and tried the following, with no success;
Resetting the Preferences file
Setting the Scratch Disc to D: (mine is a partitioned single physical drive)
Clean reinstall PS
Duplicating files and closing the original before renaming and saving them.
I'm running XP Pro, have 768 of RAM and using pretty modern machine - so I don't think it's a memory problem. I haven't installed SP2 but would rather leave this if necessary, cos I'm scared it'll interfere with something else.
I have Illustrator CS4 on both Vista x64 and Windows 7 x64 platforms. Whenever I attempt to save work via save, save as, or save for web and devices, the program stalls and crashes. I have reinstalled the program and even OS to try and fix this. It works the first few times I use it then starts to save crash.
View 21 Replies View RelatedPhotoShop fails to save PNG image - subsequent attempts to save write 0 byte files without error message. This has reproduced on two unrelated machines so far (it was reported to me by a friend, I tried his image, confirmed it, then tried to come up with a minimal reproduction.) This is pretty straightforward - create a blank image, 8-bit indexed color or greyscale at 800x992 pixels, then save as non-interlaced PNG. I'd be interested to know if it reproduces for anyone else (or if there is a known fix, I didn't see one when I searched). Steps to reproduce:-Start PhotoShop (CS2 version 9.0.2 here)-File->New-Set a resolution of 800x992 (this seems to matter!)-ColorMode grayscale (can do this now, or load or convert any picture to grayscale or 256 colors at exactly 800x992 pixels canvas size)-Hit okay-File->Save As...-Select type PNG (any filename)-Click Save-Select None for Interlace (does not crash on Interlaced mode)-Click Ok-Get "Could not save as [file] because of a program error. (As a secondary bug, if the filename is long enough this message is cut off.)
View 15 Replies View RelatedWhen Saving for Web and Devices in Illustrator CS5 (15.0.2), the application now freezes and has to be force quit.
HOWEVER if I delete the Users/~/Library/Preferences/Adobe Illustrator CS5 Settings/en_GB folder all works well until I quit the application, then the freeze will happen again. I created a new user and all was fine for that user so I transferred everything across... a laborious task.
what has triggered this AGAIN?...
Running:
Mac OS X 10.6.6
Mac Pro tower.
Note:
have uninstalled, reinstalled, updated 15.0.1 - 15.0.2
have deleted all font caches
have deleted everything... that could be related...
HOWEVER have narrowed it down to the 'Adobe Illustrator Prefs' file in the Users/~/Library/Preferences/Adobe Illustrator CS5 Settings/en_GB folder too note this is not the folder permissions issue, am aware of that and have thoroughly checked all permissions, ran disk utility and disk warrior.
I'm on Adobe Creative Cloud, and I recently installed Photoshop CC.
N01 problem:
It planted at various times on different files. But the big problem of the crash while recording that is created 0ko tmp file is unusable. And can not find a trace of my PSD was yet already registered.I do not remember this problem was present on the CS6, and frankly it's boring, because I lost all my work wanting tt simply record.
N02 problem:
Other problems also on CC, when opening a file CS6 on a form, direct selection tool is impossible to use it does not select the form ... forced to spend a strange manipulation page, you must click on the shape tool, click on the layer in question and re click on direct selection tool. a series of strange actions ... whereas before it worked very well.A contratio if the form was created directly in CC no worries direct selection.
When I save a file as a v2000 file from v 2007, the file scans to 31% then the computer chokes. This acts exactly the same in another computer. I need to do this sometimes because the person that I am sending the file to has v 2000 only.
View 1 Replies View RelatedMy AutoCAD 2013 crashed and as a result the recovered file was saved in 2013 format, instead of my automatic save profile option version set to AutoCAD 2000.
As we have other users in the office without AutoCAD 2013, how do i change the default crash save to a newer version (ie. AutoCAD 2000)?
I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons. If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)Photoshop.exe
Faulting module path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.
This is happening on the two computers here running x5 on windows 7 64 bit. Sometimes when clicking on text that is on an imported pdf, the program will stop responding. The only way to get rid of it is via task manager, and it takes about 3 mins before that will even respond to the kill process button (as in clicking on the corel process and clicking kill process will not do anything for a couple of mins)
The program window will disappear, but the process will still be there using a few hundred megs. You can load a new copy of corel and open a file, but you cant do anything with the file until the old process gets killed.
The computers are brand new i7's with 8gb ram and ati video cards in them fully updated with windows patches and corel is fully patched as well.
I am using X5 on a Win 7 64 bit system. I am having an issue with colors that manifests itself in 3 ways: When I try to change a color from rgb or cmyk to PMS, the program freezes and gives the error message that CorelDraw has stopped working. Files that have been created using more than one palette will not open on this system - although they will open fine on other machines running X5. Finally, if I even mouse-over the color palettes tab from the "Windows" drop-down menu the same thing happens.
I have used F8 to reset the workspace and when that did not work, I re-installed Coreldraw with the same result.
So A client hires a designer to create a vehicle wrap. He does it in Photoshop. If you have not done vehicle wraps before you DO NOT DESIGN IN PHOTOSHOP!!! Anyway, he sends me a link to download a psb file. Another bad sign. Means the file is huge! 1 hr to download. I open it in photoshop (at least he left it unflattened) and reduce it down enough to make a psd with layers intact. I then import it into Corel and begin placement into the vector vehicle template. Once I get all the images fiting nicely I hit save. Come back to it the next day and it won't open. Message says a bitmap is not right "Abort, Retry or Ignore" I try the backup file, same error. I try to move a copy to my hard drive instead of working over the network. No go! Try rebooting, no go! Rebuilt the file agian and saved that version to my desktop. Saved successfully, made a couple changes and then CorelDraw crashes and shuts down. Try to reopen the file and same errors occur.
View 4 Replies View RelatedWhenever I type bracket lowercase i bracket (i)the app crashes.I can stop it by turning off the quickcorrect.I guess it might be something to do with the entry that turns i into a capital??
View 4 Replies View RelatedWe are having issues with Corel X6: when we try print preview, the print preview window opens, but after we click print, it just crashes and that's it.
Both corel and Windows are updated, and the machine is clean.
After the last couple updates for Coreldraw X6 (now running at v 16.4.0.1280) my version of Draw has been crashing when-ever I go to open any of our custom templates. The templates are rather complicated, and we've been using them for years... probably since Coreldraw 7 or so, and they've gracefully worked with every version of Corel up until now.
Each model year we create a new version of the template with the new model features and file the old ones away, which also ensure that the version of the template is not too old... ie, not still trying to work with CD7 files in CDX6.
I tried doing a workspace restore (F8 at start) and that would allow me to open the template through the File -> New From Template menu the first time, but once I had my workspace set-up again, the next template would crash Coreldraw.
Opening a template via the standard File->Open menu does not crash Coreldraw.
I've now figured out that if I close the Object Manager before opening a template Coreldraw does not crash.
There was also a similar problem with importing some components that we had created as separate files, and with the same result... if the Object Manager is closed the files import alright.
I understand that there may now be "bad objects" in the file that upset the import feature, but I also don't think I can mine my way through 1940 objects (29436 points) in each template to find the issue.
Problem as we have with CD X5 when trying to crop a PowerClip Object with another object?
When we try to crop a PowerClip object with a rectangle or any other shape X5 just crashes.
When I am using the eraser tool in correldraw x5, I get a crash from time to time.
This crash causes my correldraw to completely shutdown with a message that an unexpected error has occured and that the program had to be closed.
Working with important information, this is a big issue for me.
I am facing problems with the use of Photo-Paint within the CorelDraw Graphics Suite X5 on Windows 7 Enterprise x64 SP1 machines.The application crashes when the students try to import a picture twice. The error I am getting is 0xc0000005. I already searched on Google and on this forum, and came across a lot of people with the same problem, and that it's being caused by Avast. Thing is, we do NOT use Avast, we are using NOD32 as anti virus.
View 3 Replies View Relateddiscovered a program crash while opening a Corel v.8 file created with Corel X5. Any other version of exported files works probably, only if exported compatible to v.8 reopening with Corel X5 causes a program crash.
View 2 Replies View RelatedCorel crashed once when i used shape tool once for a paragraph text and since then my color palette has gone horrible in its colors...even the guide's default color of Violet has changed to some dark blue...all the colors have gone horrible.
View 14 Replies View RelatedI have a problem with CorelDraw X4, some tools like save, save as, copy, cut, export doesn't work.
View 10 Replies View RelatedWARNING/ Windows update crash X6
View 14 Replies View Related I've upgraded to CorelDraw X6 but I need the files I make to be openable in Coreldraw 10. When saving I use the drop down box and choose the option for 10 and if they are opened again in X6 before they are opened in 10 they are fine, but when these files are opened in 10 they crash and the file gets wiped (when opened again it's just a blank page).
A not so obvious box that needs ticking? An option I have missed somewhere?
Is it because the version i have is 64bit? Or is it just not possible to downsave files properly anymore, is 10 just too old now?
I have encountered a bug that when I copy text located at the desktop area. X6 (32/64bit) will crash. if I forget this bug during my work! I need to drag the contact back to the work sheet before I copy.
View 3 Replies View RelatedWhenever I try to save a picture for web, as soon as I click on "Save" Photoshop closes without any warning - just shuts down! I have no idea what is causing this problem as it's never happened before.
View 3 Replies View RelatedI purchased Corel draw thru my work(college). Version X6 arrived. I installed the two hot fixes and things started to break. They are as follows:
Issue 1 - Printing to a PFD" file crashes x6.2
Issue 2 - tried to save file to an earlier version 14.0 to use on a epilog laser and the files are now corupt and can not be save as version 16.0 any more.
Issue 3 - Files saved to version 14.0 format can not be opened corel draw x5 for the laser to cut.
When I'm done drawing something on Corel, I can't save, save as, save as template, export, send to, print, merge or publish. I can't even cut or copy, I can only paste. I can't run scripts or add-ons either. I don't have a trial, and I have Windows XP. I've had Corel for months before this problem happened out of the blue.?
View 2 Replies View RelatedI am using windows xp. i installed corel draw x4 and activated. when i drawing any in corel draw i cant save my drawings and cut, copy, save as , etc options are not working. that options are disabled. what can i do?
View 1 Replies View RelatedI have a folder containing a bunch of old CDR version 12 files. Is there a way to batch save them as X6 instead of having to open them all and saving them one at a time?
View 5 Replies View RelatedI want to type a name and save it then post it on the new website I am working on. Problem is it post inside a white box. I have posted a link to the page I am working on.
[URL]....
I've had X5 for a while and never had problems until today. I trace a bitmap and then can not get it back into Corel. All the buttons on the bottom right are missing.
View 3 Replies View Related
