I have a logo that I want to plot, it has both picture and text. When I vectorize the image the graphic part of the logo looks great. The text cannot be identified. It looks like a bunch of shapes.
View 4 Replieswe would like to request a quote for the vectorization of images in approximately 2600 pages.
View 2 Replies View RelatedI am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
I know how to make a sentence go around the inside/outside of a circle, but suppose the sentence is not a line of typed text, but rather a line of hand-calligraphed letters which have been scanned and vectorized?
Another way of asking my question: how would you put a line of curves (letters) around a circle? To visualize, it is for a flat, coin-like pendant which will have a quote going around it.
i'm making a newsletter in which there are pages which has to written in malayalam. i use charmap (Start>Run>Charmap). in that i make a sentence by selecting each letters.. Charmap has its own text field where the written text is displayed. from that text field i've to copy paste it to corel draw's text field.
Now the problem is whenever i paste it on corel draw's text field, the letters come a bit jumbled up. i've noticed that the vowels get jumbled up. but when i paste it on ms word, it comes as it is.
I have a large text with different letters and want to change the different letters with different color. for an example
RTKIFIRFPKTLFATEDALEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHAPRRTKIFIRF
PKTLFATEDSLEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHAPRRTKIFIRFPKTLFATE
DALEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHEPRRTKIFIRFPKTLFATEDALEIRR
QSLATKIQATWRGFHCRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIQGFILRHAPRRTKIFIRFPKTLFATEDSLEVRRQSLATKI
QAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHSPR
How do I select all the text and change the same letters to a selected color at once, I know how to change the color for a letter one by one, but it is too tedious.
I created a card with a colored panel and a white background. I then typed my name along the junction of the panel and background and as I typed the top half of the letters were the panel color and the bottom half of the letters was white.
View 13 Replies View Relatednew user to GIMP. Trying to add text, but when I type - instead of the letters appearing in the text box, the shortcut keys are being used instead.
For example:
If I type "R", instead of "R" appearing, the Rectangle Select Tool is selected
If I type "M", instead of "M" appearing, the Move Tool is selected
This has only started today, hasn't been a problem before now. Just wondering if I've accidentally turned on a feature?
I want to type a name and save it then post it on the new website I am working on. Problem is it post inside a white box. I have posted a link to the page I am working on.
[URL]....
Im using the Mistral font and on closer inspection the letters have a white line that doesn't connect them entirely.
View 5 Replies View RelatedHow can you make entwined letters where two letters in two different colors overlap AND underlap each other? If I convert them (from text) to curves and then use the Virtual Segment Delete Tool, it leaves open curves and the color disappears. How can I close the open curves in a way that follows the lines of the letters (as opposed to making a straight line) so I can get the color back? Or is there an altogether better way?
View 3 Replies View RelatedWe receive art files here to work on. They've gone to a couple of different sources before we get them, so we really don't know how the file was originally saved. It gets emailed to us so that we can get it ready to send to the plate makers.
After opening the file, I save it as a Corel Draw file, then work on it. The problem starts when converting the Corel file to an AI file. The AI file now shows sections of letters filled in, like the letter o.
We're using Corel X5 and using Windows 7.
I am new to Corel Draw. I am attempting to recreate a logo with 2 letters, but I need them to overlap and then outline. It is apparently not possible to weld them, but is there another way to accomplish this?
View 10 Replies View RelatedI need to cut out letters from plastic on a laser cutter. I use "no fill" and a hairline outline and it works fine. But occasionally I want to change a font to be "thicker" or have a thicker line but still maintain the hairline outline for cutting. I can get thicker lines on screen by using the contour tool but how to remove the fill and keep the hairline outline. To complicate matters, I need these letters to be joined together, so I also need to use the weld tool.
View 4 Replies View RelatedI want to fill in a circle with letters, not a paragraph of text, but where the few letters fill into the circle space. I 'm using CorelDRAW GSX5
View 1 Replies View RelatedI want to import a .ps file I used to create via latex and gnuplot. I can import the graphics and so on, however I get the question if I should import the text. Then I want to import it as curves. However I get asked again which font I want to use. Afterwards I got a partly mess, becuase Corel Draw X6 only imports a few letters correctly. How can I import all letters and numbers as curves?
View 13 Replies View RelatedI can intersect two letters, but the top letter crosses the bottom letter twice: the first instance needs to be over, and the second instance needs to be under. Have tried everything but cannot get it the way I need it.
View 16 Replies View RelatedI want to make some letters and fill them with a background pattern like rainbow.
all the fonts are solid black so I need to know how to hollow them out so the background fill will show, then have to cut out all the letters to get the background around them removed so I have only the letters filled with rainbow that can then be moved around and overlaid like with the gray checkerboard squares thing happening.
Like this: imagine a rainbow backing picture with " I heart Mom" text overlaid, fill the " I heart Mom" with rainbow then get rid of the rest of the rainbow backing that is OUTSIDE the letters. The word heart will be replaced with a heart shape.
We are longtime users of CorelDraw, but recently we have been having lots of problems with printing.
When printing out a page for production, the letters at the end of one piece of text did not show up when printed.The wording was not converted to curves or anything; just plain text split into two lines.
On other occasions, pieces of artwork will not appear when printed. Sometimes it is consistent on multiple computers; other times only one computer will print the errors.
Is this a bug in X5? Is it fixed in X6, or are there still issues of art and text randomly vanishing? Could the printers be at fault?
Just right now, I can't find a possibility to attach a text to a curve with upright letters.
View 9 Replies View RelatedSo how can I accomplish something like the 'Reckless' text in the picture of the hat below using Gimp?
I already know how to 'text along path' but then the letters are skewed.
I want to create a text wrap - or drop cap - for a giant letter B. But I can't figure out how to do it, and every tutorial I see for drop caps refers to InDesign, and those steps do not work in Illustrator.
View 6 Replies View RelatedI need a script for Illustrator CS6, that...
1. Opens a dialog where I enter a letter, like "A".
2. Script then check the current layer for text with this letter, and "unview" (opacity = 0 or color=white), all other letters on this layer. So that the layer will only show "A", or "a" and no other type of letter. The script needs to check all text objects, some "a"s will be in objects consisting of several other letters also, like sentances. Script needs to find the letter in these and mute all others.
I am trying to learn how to write or design text letters using images for instance I want to know how i would write Photoshop using noodles or electricity wires.
View 6 Replies View RelatedIs it true that we should avoid making text in Ps cause the letters appear pixelated?What do you think about the about view?
View 9 Replies View RelatedIn the example, the red text is along the path (dotted red line). Normally the letters would slant too, but is there a way to keep them vertically oriented while doing text-to-path?
View 6 Replies View RelatedI would like to have a stencil out of letters, for example "sea" and then underly a picture of waves, so that the waves are only in the letters.
Do I need a special plug-in. How can I put something into its negative (black/white -> White/black)?
When I print my project to pdf there appears to be a copy (in white) of the text behind all the letters.
View 4 Replies View RelatedI import sequences into illustrator composed of hundreds of text letters. How do I make text bold many letters at a time? I can do one letter at a time but I need to do 20-30 at a time.
View 2 Replies View RelatedHow do I reduce distance between letters in text ? I think it is too big.
View 2 Replies View RelatedI have this text on a notepad and I want to make the same design in Corel Draw X6.
I have a few question. Which is the font used there? I tried looking through all the fonts in Corel and noone was the same. Sites like Whatthefont won't answer me correctly because the letters have white line inside.
My second question is this: I need to make the same design, so the white line should be in the letters. How to make that? Is this a font property or do I need to make it by hand? If it isn't a font property, how can I make it?