CorelDRAW X5 :: Fonts All Seem Bold And Too Black With Post Script Printer

Jul 20, 2011

Running Canon 2620Using Post Script driver with good colour matching.Using CorelDraw X5 sp 3 and all my fonts print out really heavy on the black, they almost look Bold. Text is not cmyk, just pure black.Converting to curves or exporting as eps and importing doesn't resolve it either. Seems I have have tried all settings. Text prints fine in other applications.Also prints fine in CorelDraw x3.

View 11 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite X3 :: All Of A Sudden Post Script Printer Won't Print Half Tones

Jun 4, 2013

I have been printing half tones for quite some years now with no troubles, all of a sudden my post script printer wont print half tones, I must have changed an option somewhere, and dont know what I did whether I have changed something in corel or on the printer itself but I dont think it is the printer .

View 2 Replies View Related

CorelDRAW X6 :: Printer Marks Set As Black

Dec 13, 2012

I'm trying to sort out an issue with the printer marks being set as black (K) in the print separations dialog.

What I'm trying to do is to print separations to pdf to send out to be printed in plates, for this to work I have to set the option "print separations in color" to true, so that the screen angle does not get screwed when the plates are printed. Now my issue here is that all works well just the printer marks are not in the color respective to their plate, they all are black. This will result in the plates other than the black one to not have any printermarks.

Now if there is a way to say set them to registration color or something so they are then printed right it would be great, otherwise I would need to se printer marks by hand which is a bit of a pain.

View 5 Replies View Related

Photoshop :: Post Script Printer + Cs3

Aug 14, 2008

Photoshop CS3 gives a msg saying "Some postscript specific print settings (interpolation, calibration, encoding) will be ignored since you are printing to a non-PostScript printer".

Did not get this msg with CS2. Should I download Adobe Universal PostScript Windows Driver Installer 1.0.6 - English or will this prevent the canon pixma printer from working properly or is this additional software just a way for CS3 to communicate with the printer & will not affect printing from say MS Word etc.

View 5 Replies View Related

CorelDRAW X5 :: Get Pure Black Output From B&W Laser Printer Without Using Preserve Settings

Sep 6, 2013

When i take bw laser print from corel draw, the output is not pure black. I tried using the the 'Preserve Pure Black' setting in corel draw. But it turns out to have some adverse effect while converting image from one format to the other (like rgb to cmyk) bitmaps, the black shade on the image looked washed out in multicolor offset print.

what should i do now to get pure black output from bw laser printer without using the preserve pure black setting.

printer : hp 1020

operating system : windows 7

corel draw version : x5

View 6 Replies View Related

CorelDRAW Graphics Suite X6 :: CDR Printer Output Appears To Be Grayscale Instead Of Solid Black?

Aug 28, 2012

New to CDR X6 just having upgraded from CDR 8.

Printing a black and white layout to my HP LaserJet 4000 produces an image that appears to be grayscale instead of solid black. In other words, my text, line border I've put around the layout and graphics (for the most part), all appear about 70-80% black instead of SOLID black. Small text doesn't appear to be nearly as sharp because it looks like a halftone instead solid black. On one layout I just printed, the entire thing appears halftoned except for one vector graphic that did print in solid black. Strange. I figured I have something set incorrectly in the software or printer. Has to be the CDR X6 software though because all other programs output just fine.

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Color Management - Black All Raster When Printing On Laser Printer

May 16, 2012

I have a problem with CorelDraw X6.

When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.

Probably the problem is somewere in X6.

I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.

View 3 Replies View Related

GIMP :: Bold Versions Of Some Fonts Fail (2011)

Feb 21, 2011

At some point - I'm not clear when - something changed with my fonts(Linux - Slackware64 13.1). Now I cannot select, for example, the boldor italic version of DejaVu Sans. The appear as Regular.

- I tried to install the newest package for the dejavu fonts,

- ran mkfontscale

- ran mkfontdir

- Though probably unnecessary, ran fc-cache

First tried to 'reload fonts' (button in fonts dialog) in Gimp, thentried to restart gimp entirely. (and from a terminal to check for anymessages with --verbose).

View 2 Replies View Related

Photoshop :: Cannot Find Adobe Post Script Fonts...

Oct 13, 2008

I have a couple of Adobe Post Script fonts installed using Adobe Type Manager. I'm using Windows Vista Enterprise. First of all, is this C:PSFONTS and C:PSFONTSPFM the correct location for Adobe fonts under Windows Vista? I just installed about four Adobe post script fonts using Type Manager and it does not show up any of Adobe's product including Photoshop and LiveCycle. I also went back into Adobe Type Manager and look at the fonts that I just installed under the Fonts tab and I could not find it.

View 2 Replies View Related

Photoshop :: Arial Black- How Can I Bold And Italicize?

Feb 26, 2008

This is my first post because I could not figure out the problem. I'm trying to use the font ARIAL BLACK in Bold and Italic. However, when I select the font, the bold/italic feature is disabled. It only happens in PS as I can bold and italicize this font in Paint, Word, etc.

View 1 Replies View Related

AutoCad :: Text Prints Out Bold When Its NOT Bold?

Jun 9, 2006

im using CAD07 &06 when i print out a drawing with lots of text some of it come out bold and some normal yet they are all the same font/height/size etc in the dwg?

does it make a diff if its mtext or single line text?

View 9 Replies View Related

Photoshop :: How To Embeds Fonts And Prepare PDF For Printer

Jul 27, 2013

I will be sending a file to a commercial printer to print. The Photoshop file has images, text (with new fonts I got from dafont.com) and three simple vector shapes.What do I need to do to prepare it for printing?
 
It's already set to 300dpi, CMYK, but after that I'm a bit stuck! How do I embed fonts for example?I'm using Photoshop CC.

View 7 Replies View Related

CorelDRAW X3 :: Attach CPT File To Post?

Mar 18, 2012

I trying to attach a CPT file to a post. 

I see where the "insert media" button, but when I try to upload the pic it says invalid file type.

View 7 Replies View Related

CorelDRAW X5 :: Unable To Post Any Type Of Media

Apr 23, 2012

I am unable to post any type of media as well as profile photo.Either the site is offline or an unhandled error occurred.

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Dpi On Post Script

Oct 25, 2012

I have corel x6 and i am tring to control the dpi in the advance setting in the area of the fountain fill and the area that has the the little box shows post cript optiones but it is lite grey and does not let you select it any body knows what i am doing wrong i allready changed the setting on my hp 5000n to postcript 3 and the settings on corel x6 when you go to print what else am i missing

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: Arial Narrow Bold

Aug 8, 2012

I got problem with Arial narrow bold, if i make new document in x6 i have problem,

if i open old document  (x4), everything is ok, but if i click update text, again Arial narrow bold is wrong.

View 10 Replies View Related

CorelDRAW Graphics Suite X5 :: Fonts With Parts Of Letter Missing In Few Fonts When Sent To Cut / Plot

Feb 20, 2012

fonts withs parts of letter missing in a few fonts when sent to cut/plot

View 10 Replies View Related

CorelDRAW X4 :: Paste Text From Word And Retain Bold And Italics?

Jul 26, 2009

I got a word doc file but when I copy and paste the text into coreldraw I lose all the italics and bold. It's 4 pages with lots of bold and itallics and needs to be reflowed in draw but retain exact italics and bold. When I paste it into draw, I lose all the bold/italic formatting. Are there any workarounds to get the bold and italic text to copy and paste into draw?

View 17 Replies View Related

Photoshop :: Printer Wants My File To Have 100% Black?

Apr 24, 2005

I recently finished some wedding invitations & sent them to a printer. They called me back & said that they needed the black to be 100% black and the pink to the 100% magenta. I have tried everything I can think of to change the colors, but they keep changing back to their original color.

For example, when I try to change the text to:

C: 0%
Y: 0%
M:0%
K: 100%

It changes it to:

C:75%
Y:68%
M:67%
K:90%

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: Post Large File (2.026MB) To Gallery

Feb 10, 2013

My latest design is a little bit too big 2.026MB. I would like to post it to the gallery. How do you send large files?

View 3 Replies View Related

CorelDRAW Graphics Suite 11 :: Why Curve Get Broken When Use Artistic Media Tool To Bold It

Sep 12, 2011

I made an elipse and changed it to arc.

Than I used artistic media tool to bold it but the arc get broken.

The arc I am talking abouth is Yelow. Red circle is showing a plece where arc get broken.

View 3 Replies View Related

CorelDRAW X3 :: Printing Fountain Fill / Gradient Images On Screenwriter Post Script3

Mar 22, 2012

I am able to print the document without the gradient/fountain fill.  I have been trying to print an image with gradient/fountain fill and the gradient image will not print...

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Adding Dots From Post Script Options To PANTONE Colors

Jul 29, 2011

I work in a print shop. We do a lot of work with a printing press as well as our digital machines. Whenever we design something digitally that has grayed areas or logos, and we want to print it using our press, we need to make sure the shaded areas have "dots" so that the ink from the press will spread evenly.

In CorelDRAW X4, I used to to have it sent to the general PANTONE uncoated palette. After selecting the gray area, I would double click the color box at the bottom right, bringing up the fill window. From here, I selected the Options drop down menu, then PostScript Options. Here I could set the dots and the frequency.

Now that we've updated to CorelDRAW X5, the palette options are quite different. I want to have one centralized PANTONE unocated set that stays for everything I work in. And the big problem, is that when I do find a good gray to use (after clicking through way too many choices), the PostScript Options is grayed out and can't be clicked on.

View 6 Replies View Related

AutoCAD 2010 :: Print In Black And White To A Laser Printer

Oct 10, 2012

I have one user that when trying to print to a color laser jet printer it only comes out in color. I even set the Plot style to monochrome.stb, (which is a network file that others use without issue) have Plot with plot styles checked, and even tried checking the black and white only in the printer properties. This is Autocad 2012.

Is there something I am missing to have the print out come out in black and white? Te print preview shows it in color.

Forgot to mention, if another user opens the drawing, it prints in black and white ok.

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Macro To Set Font Attributes Such As Black And Black-Italic

May 11, 2012

I have a macro to set text attributes. The code I use is shown below and works fine.

Some fonts have attributes with other names such as 'Black', 'Black-Italic', 'Normal-Italic' etc. I would like to be able to set these attributes.

    Set s1 = ActiveLayer.CreateArtisticText(0, Position, "X")

    Set txt = s1.Text.Story.Paragraphs(1)

    txt.Bold = True 

   txt.Italic = True

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Black Drop Shadow Does Not Appear Black When Publish To PDF

Jun 17, 2011

1. Black drop shadow does not appear black when Publish to PDF

2. The object beneath the drop shadow will appear as show below:

I've tried to convert the drop shadow to bitmap but the result is same.

View 15 Replies View Related

CorelDRAW Graphics Suite 12 :: Changing Default Black To True Black

Aug 14, 2011

When I import an eps, or create a new object with a shape tool.  The default style is a clear fill and a hairline CYMK black (0,0,0,100) outline.  I think I know how to change it to true black (0,0,0,0), but when i import an eps or an illustrator file, it is coming in as CMYK black (0,0,0,100)

View 2 Replies View Related

Photoshop :: How To Extract Black Fonts From Gray Background?

Sep 7, 2006

I have a TIFF file of a scanned microfilm page of a very old manuscript.

The background of the black fonts is gray, and it makes the reading of the text very hard.

My question is: is there a simple way to extract only the black fonts of the text, or otherwise to brighten up the background?

View 2 Replies View Related

CorelDRAW X6 :: Black Object Not Stay Black

Dec 18, 2013

Object that I make black, do not stay black - Why?

I'll change it to black, do some more work and later I notice that it's not quite black. after checking the properties, I will see that it is in fact back to some default value and I have to again set it to black, 0,0,0

Why will it not stay black?

View 7 Replies View Related

CorelDRAW X5 :: Black And White PNG Showing Black Box

Jun 24, 2011

bdpnp1.png

Basically a CAD program I use only exports PNG files. The CAD program can export in black and white and in color. The color PNG files open fine in CorelDraw. The black and white PNG files just show up as a black filled box.

I attached an example PNG file. Example PNG

View 7 Replies View Related

AutoCAD Print / Plot :: EPlot DWG To PDF Renderer Fills Fonts And Other Entities With Enhanced Black

Feb 1, 2013

I have been having this issue with autocad generated color PDF printouts having "fuzzy" fonts and some other black objects.  What I have traced it to is that the PDF created by the stock Autodesk PDF ePlot renderer/driver is printing those fonts (and other things like lines with global width) in rich or enhanced black.  75,68,67,90 CMYK to be precise.  When this is done without some sort of 100% K border (and sometimes even with) it leads to a blurring of the edges because the registration is never perfect.  There is often even some ghosting due to the sheer amount of toner.

Some printer drivers have a way of forcing or selecting this "Enhanced Black" but I see nothing in the settings.  I wonder if this can be externalized.  It seems that at least fonts should almost never have this turned on.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved