CorelDRAW X5 :: Coloured Desktop And Page Background Randomly?
Jun 15, 2011
recently installed X5. More often than not - when I open Corel X5 everything has a yellow tint. Doesnt happen all the time. Checkout the image below. X5 over top of an X4 window. Everything on and inc desktop is affected inc pallet which is supposed to be CMYK. White now = beige . When I first opened X5 it came up with some issue about the monitor profile. Weird thing is I will open it 10 mins later and it will behave normal - all back to looking like X4.
View 5 Replies
ADVERTISEMENT
Apr 9, 2012
I would like to know if CorelDraw has a way to randomly place images on a page. They need to be on a angle and going up on right and up on left.
View 4 Replies
View Related
Nov 17, 2012
i want lock all object on all pages. so i make a code but i wnt to run this code except master page (desktop)
my code is ............
Sub LockAll() Dim p As Page Dim s As Shape Dim i As Integer, j As Integer j = 1 For Each p In ActiveDocument.Pages p.Activate For i = 1 To ActivePage.Shapes.Count ActivePage.Shapes(i).CreateSelection If ActiveLayer.Printable = False Then ActiveSelection.Locked = True j = j + 1 Next i Next pEnd Sub
View 5 Replies
View Related
Jun 23, 2011
Friends, In some documents (not all) if I place some objects outside page area (desktop) it disappear for other pages. I have to use copy paste (very slow and time wasting process)
check following images for better understanding of the problem:-
Page#01 : [URL]
Page#02 : [URL]
I am using: CorelDraw X4 fully updated (all patches installed).
View 12 Replies
View Related
Jan 19, 2008
how to create this two-coloured background...
View 3 Replies
View Related
Jan 24, 2007
how to very simply create a coloured background and add text to this.
View 3 Replies
View Related
Sep 7, 2008
I have a red block and on that block I have some lines which I have in white but they need to be transparent as this design is going to be printed on tshirts of different colours and the colour of the tshirt must show through the transparent lines. Im not sure how to make them transparent though, when I convert the white to tranparent you see only the red.
View 6 Replies
View Related
Jan 19, 2012
I have a document with multiple pages. How can I change the background of only one page? In the layout settings I only can set the background for all pages.
View 10 Replies
View Related
Oct 31, 2013
I want new documents to open with a solid background color by default. I've opened a new doc, gone to tools>options>document, set the solid background I want, then check save options as defaults for new documents. But when I then open a new document, the background setting is back to "no background".
View 8 Replies
View Related
Jan 29, 2012
I am making a logo design to be printed on a t-shirt. When I make the logo I am making it on an 11” x 8.5” paper size. The logo is not rectangular. When I save the logo as a pdf file, the page background is showing. I also convert the pdf file to a jpg file and the white background shows. I went in and changed the page background to No Background, It did not work. I went to Options>Page size and turned off the Show Page Border, it did not work.
View 8 Replies
View Related
Aug 16, 2011
I want to make the edge of a coloured object look frayed like a pice of material.
View 5 Replies
View Related
May 28, 2013
I've only just started having a problem with Photoshop. I'm running it on Mac OSX
My images will randomly take a chunk out of all layers, and the background will turn black where it was originally white. In one case all the layers on my canvas were distorted by a checker pattern of bright colours. All the images I am currently working on are in RGB mode which were hand drawn black and white images that were scanned.
I'm not sure what is going on but closing the image without saving and the closing photoshop and even restarting my computer doesn't seem to fix the problem.
View 5 Replies
View Related
Dec 5, 2011
I recently upgraded from CorelDRAW 11 to X5 and have started having issues. I print primarily text and vector images on a UNIVERSAL engraving laser.
Since I upgraded there have been several times that vector images will add random vectors stretching halfway across the piece I'm engraving, completely ruining it. The vectors are completely random in their placement and occurance. I've printed to the engraver 3 times in a row with identical settings and had it do the additional random vector 2 different ways then the third time print out completely fine.
View 2 Replies
View Related
Oct 16, 2010
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
View 3 Replies
View Related
Feb 10, 2013
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
View 10 Replies
View Related
Jul 13, 2011
How do I change the background of the inventor's desktop? Because the default background is blue, I wanted to change to white.
View 8 Replies
View Related
Dec 26, 2008
how do you make the main photoshop cs4 interface background show ur desktop.
View 6 Replies
View Related
Apr 5, 2005
Is there a way to create a desktop background from a small low-res. image? I didn't want it to tile and I wanted it to fit the entire screen. I've looked on the web and it just seems to offer trial software to do it and you have to be on a PC to use those software....I use a Mac
View 1 Replies
View Related
Jan 5, 2013
I've set the cell height's of a table to some reasonable height after creating the table.Whenever I try to enter some text in any of the cells, either the table resizes to the original height or the currently selected cell (or whatever CorelDRAW believes might be the "selected" one) becomes so huge it spans a couple of rows, making it impossible to click on any of the cells below that currently active cell.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 2 Replies
View Related
May 9, 2011
When using CorelDraw x5 the program seems to just randomly close, with no error message or freezing. It just disappears from the screen and I have to re-open it. I cannot pin point when it is doing it, because it keeps closing upon random tasks, not like it closes every time I try the same thing like saving.
View 5 Replies
View Related
Mar 30, 2012
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
View 14 Replies
View Related
Sep 9, 2013
Untitled-1.jpg
i often do a very big and complex mix of logos names and so on.
i´d like to know if ther is any hotkey on how to move any object or a group of objects from far on the page to the page border.
View 4 Replies
View Related
Jul 30, 2013
Is it possible to generate a group of shapes with different size randomly in corelDraw macro? For example I want to generate 100 squares with different size and distribute them into the sheet automatically.
View 3 Replies
View Related
Aug 13, 2013
I'm trying to create a high-res desktop background image (1680 x 1050) with a gradient-fill, but the "steps" between the color changes in the background are obvious and I'd like them to be smoothed out. I know that the fill steps are much smoother when a shape is smaller, but I want this to be high-quality and sharp at full size.
Can the "steps" be adjusted to be smaller, or is there a better way I could go about achieving a smoother fill?
Here's an illustration of what I'm talking about. Hopefully it's obvious enough up on this image (you may have to view it full size):
View 9 Replies
View Related
Dec 8, 2011
I have been having problems opening old corel drw 11 jobs that i did.
Once i finish designing and close the files, it will not open the following day.
also some times i get an error message that the application you are using has become unstable and will need to close, and i always lose any ongoing projects.
View 1 Replies
View Related
Feb 23, 2009
I used CorelDraw X4 to Open several 48 page PDFs (File, Open, open the PDF.) The PDFs consist of 6 images per page in a grid - no text, nothing fancy. Everything works great, except that in the CDR files that were originally created by openening the PDFs if I drag one of the original photos or any object that I've drawn in CorelDraw on one of the pages to the desktop, it doesn't move to the desktop layer as I'm used to but instead stays on the page layer for the individual page it was dragged from and thus is only visible when the original page is up even though it's outside the page area unless I manually change its layer (I ususually use the desktop as a quick way to move objects between pages faster than using the clipboard.)
This is probably something silly, a setting that I've never used -- how to make it so any object dragged off the page to the desktop area is moved from Page 1 Layer 1 for example to the Desktop Layer so it's visible to all pages, and can then be dragged form the Desktop to Page 2 Layer 1 for example.
View 6 Replies
View Related
May 30, 2012
I'm a LONG time Corel user -- back to version 4. Have been using X3 for years. Bought X5 but liked X3 better so I kept using it. (Basically only used X5 to import customer Illustrator files and PDFs that wouldn't import correctly into X3.)
Got new computer with Windows 7 and decided to upgrade to X6 64 bit. Overall it's been fine. Only using for a few days.
One thing I do are custom estimates for my clients. I keep several "stock" paragraphs of content on the desktop so I can copy and paste these into the estimate. Typically I just open an old estimate, rename it, and start the new estimate.
Opened X3 estimate in X6 and renamed it. Having some strange behaviors. The file was way too big. Should have been a couple hundred k and it was more than 4mb. Crashed several times. When I would add a page and copy content from a previous page, it would make the desktop grid printable, and I couldn't turn it off. Crashed some more.
Decided to start with a new X6 document. Copied pieces from the X3 file to make a new estimate template. File size now looks correct at a couple hundred k. Everything working fine except when I try to copy text from a paragraph box on the desktop INTO a paragraph box on the page it crashes. Not every time, but often.
View 13 Replies
View Related
Sep 27, 2012
In Microsoft windows 7 Ultimate 64 Bit when PDF is created in Coreldraw X6 64 bit PDF Icon dont shows Thumbnail on Desktop. I can see the thumbnails from other's PDF
View 2 Replies
View Related
Jul 22, 2012
I have encountered a bug that when I copy text located at the desktop area. X6 (32/64bit) will crash. if I forget this bug during my work! I need to drag the contact back to the work sheet before I copy.
View 3 Replies
View Related
Aug 19, 2013
With the code below, I can delete off-page objects...as long as they are assigned the Desktop layer. If there is no object on that layer, I want a warning box to pop up stating so. How can I do this? I imagine that I'll need If then statement something like 'If .....objects on layer Desktop <0 then pop up warning message box, end if.
Private Sub CommandButton4_Click() ActiveDocument.BeginCommandGroupActiveDocument.MasterPage.DesktopLayer.Shapes.All.Delete ActiveDocument.EndCommandGroupEnd Sub
View 3 Replies
View Related
Oct 11, 2013
How do I change the background color on the page?
View 5 Replies
View Related
