CorelDRAW X4 :: VBA Form / Display Palette And Pick Colors
Mar 29, 2011
I have built a VBA form for generating stripes at random from a user defined palette (with a few parameters decided by the user) via a user form.
I now need to include an option of displaying the palette (maybe by using a method to include this in the form or by shifting the focus to the coreldraw window/palette) and then the ability for the user to pick colors from this palette (which will then be passed to the script for further processing).
View 6 Replies
ADVERTISEMENT
Oct 3, 2012
I know how to use eyedropper to pick up colors and save them into a palette. could I export the colors I picked up (one by one) and save their RGB values into another file directly. Suppose I picked up 10 colors, I want the RGB values of these 10 colors could be retrieved by a single time. Now I have to type these RGB values into another excel sheet one by one.
View 2 Replies
View Related
May 29, 2012
colors.jpg
See the examples below. I have a table with 24 different colors. When I determine to create a custom palette with 24 shades of this table, all colors are added to my custom palette (pic. 1).
Now, assuming I double them to 48 tones, which the criterion adopted by CorelDRAW to create the midtones? Note that Green color, in the second row (pic.2), has not an intermediary tone, while for White (last color) were created three options.
View 9 Replies
View Related
Jul 26, 2011
I am designing a stained glass panel in corel, I have the glass colors on a pdf from the glass maker. Is there any way to add these to a palette?
View 10 Replies
View Related
Feb 22, 2012
My document palette adds the same colors that are NEVER in my art every time. I swear it's a glitch. The colors are so bizzare. And when I go to delete any of them, it says I can't because they are in use. But they are for sure not being used.
Here's a list of the colors:
Black A0QM, Pantone 142, Black A0QM (1), Black A0QM (2), Black A0QM (3), DIC 2287p* (1), PANTONE 142 (1), Black A0QM (4), PANTONE 142 (2), Black A0QM (5), Black A0QM (6), Black A0QM (7), DIC 2287p* (1) (1), PANTONE 142 (3)
That's the order they are always in. I don't even know where you would get any of those colors and what they would be used for? Except the Pantone of course.
View 1 Replies
View Related
Dec 20, 2011
I used to have X4 installed on XP and it worked fine. Recently I re-install the program onto my new Win7 PC. It was working fine at first but one day my CMYK palette turn into some weird colors (much brighter than the original one)
I tried to hold F8 to launch X4 to turn it back to dafault settings but no go. I tried uninstall and reinstall and it's the same. Finally I downloaded the latest X5 Free trial and the color palettes are displaying correctly! (So i figure it's not my monitor's problem nor some Windows setting.)
(X5 Displaying the correct CMYK color palette)(Ised X4 for a few days and the colors became much brighter than the original ones.)
View 3 Replies
View Related
Aug 2, 2011
Is there a setting in CorelDRAW that will automatically add the colors in a design when it is imported/copy-pasted/opened to the color pallette? Like you import a logo and the colors are automatically in the pallette?
View 4 Replies
View Related
Apr 11, 2013
Is there an easy :) way to create a color chart (which I can print later) with Corel Draw?
1. I want to use a single color palette, e.g. one of the Pantone range.
2. Each color of this palette should be the filling of a certain shape (all shapes are similar), so that the number of shapes equals the number of colors in the palette.
View 2 Replies
View Related
Mar 17, 2011
I have a palette provided by Roland for their digital printers to match their standard colors. In order for the colors to be recognized and converted by the RIP, they need to be set as spot colors in CorelDraw X5.
It would be nice if I could change the Treat As Process/Spot attribute for multiple colors at once in the palette editor.
I peeked at the CPL file--unfortunately it's not something easy to edit like XML, CSV or the like. Too bad that, too.
View 2 Replies
View Related
Dec 1, 2011
For better speed i'm using coreldraw 12. All of a sudden it is showing different colors for files. A color shows up different in version 14 [ that is the correct display ] . it is incorrectly being showed in version 12. i've put up screenshots of both versions. What setting is messed up in version 12.
THIS IS THE INCORRECT ONE AS SEEN IN VERSION 12 . The file is same
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 2 Replies
View Related
Apr 3, 2013
How to Pick the Right Color Palette for Your Designs.
View 5 Replies
View Related
Nov 3, 2012
The background is a gradient mesh(ignore the crosses). I used eyedropper tool(shift-click/normal-click both gave the same result) on the background and it gave me a strange result. As you see the back ground is blue-to-black gradation but the color picked is green-ish from nowhere.
View 8 Replies
View Related
Sep 25, 2012
In this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
View 2 Replies
View Related
Nov 12, 2012
I'm in the process of converting existing VBA code to VB.NET using AutoCAD 2010 and MS Visual Studio Professional, and I just hit a major snag.
In AutoCAD 2010, double-clicking a block will display its attributes in the attributes editor; I would like instead to be able to display my own custom vb.net form showing some of the block's attributes, IF AND ONLY IF the block was created by my dot net form (the block would have certain identifiable characters in its name).
So far, I have discovered that this may have something to do with the cuix customization file, as well as setting the system variable DBLCLICKEDIT.
View 9 Replies
View Related
Jan 10, 2012
Is there a way to have more than 12 colors contained in my color palette in GIMP?
In the image seen below, I see that it can remember 12 colors in the main palette on the left, but with the color dialog palette on the right, there seems to be no way to add or change colors there, but it has more room than for 12 colors.
Is there a plug-in that allows GIMP to remember more than 12 colors? I did a search in the plug-in registry but I didn't find one.
View 10 Replies
View Related
Oct 18, 2011
know the shortcut key for bezier tool and pick tool.
View 3 Replies
View Related
Jul 12, 2011
So, I'm a dyed-in-the-wool Adobe user who is somewhat new to the Corel world. In CD12, I was able to successfully create a workspace and workflow that mimiced AI. In CDX4, I've run into a snag assigning the "v" key to the Pick Tool. I get a msg. in the dialog box that describes it being already assigned to a nebulous "tool modifier". Because of this, I am unable to re-assign "v" to the pick tool.
View 8 Replies
View Related
Jan 9, 2012
Current problem is that I've created certain colors for an art piece - basically, it's different poses of a character. I'm outlining each pose on a separate Xara page. So I've inked in the first pose, and, in so doing, created a couple of new colors, which I've named.
Those new colors do not show up in the color palette when I open a new page to ink in another character pose - the palette just defaults to its basic lineup. Is there a way to create a new color and keep that color in the palette for any and all art pieces?
View 9 Replies
View Related
Oct 25, 2011
I want to detect percentages of my artist's oil colors in any area of a vectorized photo that I point to.
So, I want to first vectorize a photo to reduce it to manageable separate color areas. Then, I want to be able to get a list of the various percentages of 108 different colors that make up any of the vector color shapes I point to or select. These 108 different colors are somewhat accurate small bitmap swatches that correspond to 108 artist's oil paint colors.
Alternatively, can I just somehow plug in this 108 swatch palette and have a software (Xara?) break down a bitmap into areas of vector color using only this custom palette?
Is this possible in Xara, or by any other means you know of?
View 8 Replies
View Related
Feb 10, 2013
is there a way to take an image opened in Gimp and display the palette of colors in the image or convert the image itself into a palette of colors that are in the image?
View 3 Replies
View Related
Sep 7, 2013
Sometimes, when I'm working on a design, I realize that there's just a handful of colors in Swatches. Why does this happen, and how can I recover the whole palette?
View 5 Replies
View Related
Apr 17, 2013
Out of the blue, my Layer Control will not work. When I click on the icon, the top two lines on the screen go gray and the whole thing locks up. The layer palette does not appear. If I try to choose anything on the screen, it beeps. It unlocks if I hit escape. If I type in "layer" at the command line, the same thing happens. At this point, I am unable to change lineweights & colors within my layers settings.
View 2 Replies
View Related
Mar 16, 2012
Friend Shared
m_ps As Autodesk.AutoCAD.Windows.PaletteSet = Nothing If m_ps Is Nothing Then m_ps = New Autodesk.AutoCAD.Windows.PaletteSet("Test") Dim myPalette As EPSSN = New Test() m_ps.Add("Test", myPalette) m_ps.Size = New Drawing.Size(354, 591) m_ps.Visible = True end if
In my tool palette is have some controls. In some systems entire palette is visible completely, but in some systems, the bottom controls in the palette are not visible where the system settings are different. Is there any option to display scroll bar in the tool palette automatically?
View 1 Replies
View Related
Apr 20, 2010
The current shortcut for toggle pick tool is ALT+SPACE BAR, but CorelDRAW X5 do not allows to change to CRTL+SPACE BAR (as I´d prefer it). There´s any other shortcut using this key combination.
EDITING TEXT
Disregard what I wrote above. But for some of these mysteries of the computer, I´ve got it: CTRL + SPACE BAR works!. Do not ask how that happened, because I did nothing different from what I had been done before. It just worked. I guess that myself or CorelDRAW were not in a good day. (But still think it was the CorelDRAW - lol).
[URL]
View 4 Replies
View Related
May 15, 2012
I am 2 days into using X6 instead of X4 attached to my trotec engraver, using XP.All goes well with the print to the trotec job control, with it picking up the red vector cut line.
But if I print multiple pages, or use print merge (which is essentially the same thing), the cut line only prints as red on the first page. From then on the print line is some grey colour and consequently the laser does not pick it up.
Have tried changing colour conversion to the Trotec, but this doesn't have any effect.
View 1 Replies
View Related
Apr 3, 2012
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
View 2 Replies
View Related
Nov 29, 2011
I was trying to learn about naming colors. I named a color, only to find it was now in my default color palette, which was now 'Untitled1'. I did not want to have the default palette that opens on the Color Line when I open the program changed and requiring me to rename it every time I named a color. I tried to undo my actions but had only partial success. The new named color is gone, but the color palette is still 'Untitled1', and how to restore the palette name. How can I correct this?
View 9 Replies
View Related
Oct 11, 2012
Have an open image in gimp 2.8 on suse 12.2, I call the "import palette" function, I set 64 colors, step 32, check the "from all layers" etc etc, and in the preview I see the 64 color palette I'd like. Looks good.
BUT: underneath the preview it says "the selected source contains no colors."And continuing the palette is indeed empty.
-----BEGIN GEEK CODE BLOCK-----Version: 3.12GCS d--(+)@ s-:+ a C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K-w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h>++ r* y?------END GEEK CODE BLOCK------
View 1 Replies
View Related
Sep 18, 2013
Is there any way to save colors to the Paint.net Palette, For instance, I have a list of colors made from user input and I want to put the in the palette...any code for that? Is that a valid Urinary Pixel Operation?
View 1 Replies
View Related
Nov 20, 2013
When I set C to 40% and MYK to 0% the program automatically change to other values in all four columns. Is it some kind of default settings? If so, how can I change it?
View 3 Replies
View Related
Jul 20, 2013
I click and hold on a tool in Photoshop CS 6 on the Mac and it takes 2-3 seconds for the submenu to display. All my mouse settings are towards the fast end. Illustrator CS6 displays them much quicker and previous versions of PS weren't this slow to display the submenus. Can I speed up the submenu (alternative tool) display?
View 2 Replies
View Related
