CorelDRAW X4 :: How To Completely Uninstall RecentFiles VBA Macro
May 9, 2010
Re: CorelDraw X4
Windows 7 x64
Installation of Office 2010 breaks the RecentFiles macro, so uninstalling it is now necessary. I would have thought that removing recentfiles.gms from Draw's GMS folder would be sufficient. However, this actions leaves a VBA error message when Draw launches:
"Object library invalid or contains references to object definitions that could not be found".
i was running a trial version of X6 before i purchased - got to a few days left and had a few issues where i was able to run the programme, but had to open it, then press ESC before i could do anything..Now - a few days later, and the trial is now expired - i am unable to do anything - i cant sign up, purchase the software, uninstal, modify or repair it!!
I'm trying to uninstall X5 to install it again. Because when I try and any of the programs connected to it I get blank screens. I'm completely dumbfounded.. When I click on it to "UNINSTALL" I also get the green bar for about 2 seconds, but the box is completely blank. No buttons or anything.
Please find the attached "Error Message.jpg" file.I am getting that Error Message while trying to Uninstall "CorelDRAW Graphics Suite X6" on a Windows XP Desktop Computer. This Computer belongs to other person. I am getting the same Error Message upon trying to Re-Install CorelDRAW Graphics Suite X6.How do I successfully Uninstall and Re-Install?
I removed Font Navigator before updating to version 16.4 because it didn't work well you know. But now I want to install it again.My system is 64 bit.
What if I install it from CD, because on CD there is the older not fixed version of FontNav and I don't know what to do next.How can I update it after installing it or I have to remove all Corel programs, reinstall them and update to 16.4?
Some weeks ago, I posted about my inability to install SP3 -- (a host of) Error 1310 messages, related to permissions to access certain folders, according to the on-screen messages.
Last night, for the first time, I could not open Draw at all -- there was a pause while the PC tried to open it, then an useful message box that reported that a "problem" had caused Draw to stop working, and that I should close the program.
Trying to open all other X5 suite apps is similarly unsuccessful, though none produces that particular error box.
I tried to repair the installation. No go. More Error 1310 messages.
I tried to reinstall SP2, the last patch that actually worked for me. Error 1310.
I tried to uninstall the suite. Not allowed. Error 1310.
I then tried a series of steps to correct the access errors causing the 1310 messages. I tried unregistering/registering the msiserver; deleting or renaming the "Config.msi" folder to which the errors referred, hoping the newly created folder would not have the issue. I made sure I had administrator privileges (the 1310 error alleges that the user does not have access to the given folders). I did everything I could find online. No effect.
So, at the moment, I can't open, repair, update, or uninstall the Draw X5 suite. Short of wiping the hard drive (I don't have issues when I try to uninstall other apps), is there anything I can do?
I know this is a Windows issue, but with that "A problem has caused Draw to stop working" error message.
I was wondering why Batang and Arial were appearing in the Fonts under Document Properties when I had not actively used them in my "New" document.
When I looked at the Default text files, I believe I see the reason. I find Batang listed as the default Asian Text font for both Artistic and Paragragh Text. The options for Asian Text don't seem to include any fonts that I have on the old machines.
Similarly, the Middle East Default Text style would seem to generate the Arial(Arabic) entry in the required fonts.
Is there a way to completely eliminate the default Asian Text and Middle East entries from the default text styles?
This is a macro I've been working on for a few days, what it does is it applies the selected transformation to each one of the selected objects individually. It rotates, scales and flips in both axes. I think this is a simple but useful workaround to the fact that Corel doesn't have a native command that does this.
I have a VB script that I created in excel that does a number of things. At some point I want it to open a series of variable Draw documents based on names and paths from columns in an excel document. This part works fine. However, I also want to perform a macro, created in CorelDraw, on said files once opened. This macro also works fine. The issue I am having is getting Excel to tell Draw to run the macro. I wrote the line with the same syntax I would use for telling excel to run a Word macro. IDK.
Set CorelDrawApp = CreateObject("CorelDraw.Application.15") CorelDrawApp.Visible = True Dim i As Long
I work in a trophy shop running laser engravers. I'm looking for a macro that would select everything on a page, flip it vertically, and do so throughout a multi-page document - I just had to do that manually for an order of 236 acrylics (all in one multi-page file!) and it - well - was a bit tedious I can make a macro to select all and flip - but I'm lost when it comes to getting it done throughout a file, I can only get it to do that a page at a time.
so I've recorded a macro to find all drop shadows and seperate them from whatever they're attached to. Now my problems is how to deselect the objects leaving just the drop shadows selected
Sub Macro173() ActiveDocument.CreateShapeRangeFromArray(ActiveLayer.Shapes(3), ' ActiveLayer.Shapes(1)).Cut ActiveLayer.Paste Dim Paste1 As ShapeRange Set Paste1 = ActiveSelectionRange ActiveDocument.Undo ActiveDocument.Undo ActivePage.Shapes.All.CreateSelection ActiveSelection.Separate End Sub
I want to take the current document, convert to PDF using a profile I have saved, then create a new email message in Microsoft Outlook, attach the PDF that saw just created, and use the file name as the subject of the email (minus the file extension).
Bonus points for also selecting a signature that I have in Outlook. I know the PDF creation can happen, and I know I can save the file name to be passed on, but can I access Outlook from CorelDraw?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
use the interactive contour to create an inline. Cntrl+k (break apart). It works but leaves both selected. Now what I need it to do is deselect the outer rectangle leaving me with just the inner one still selected.
I have a macro that saves a file to a temp directory. Is it possible to use a macro to just "copy" that file to the clipboard and stop? I just want it available in the cliboard so I can navigate to where I want it then paste it. I then rename it. The directory will always be different as will the file name.
I am working on creating a macro we can save with a template to ready the designed art for print. So the designer can create the design, run this macro and export a PDF. The macro needs to:
1. Turn off template layer.2. Select all objects layer 1.3. Group all objects layer 1.4. Rotate -90 degrees.5. Set layout to landscape.I have everything working except the Select all "Objects Part". the macro will only select objects that are there during the creation of the macro, and not select the designed work.
Is there anyway to just add a keystroke of "Ctrl+A" to the macro?
Here is the macro i got: ____________________________________________________________________
Sub Adstand_Rotate() ' Recorded 5/17/2012 ActivePage.Layers("Template").Visible = False Dim s1 As Shape Set s1 = ActiveLayer.CreateRectangle(0#, 70#, 39.75, 0#) s1.Fill.ApplyNoFill s1.Outline.SetProperties 0.006945, OutlineStyles(0), CreateCMYKColor(0, 0, 0, 100), ArrowHeads(0), ArrowHeads(0), cdrFalse, cdrFalse, cdrOutlineButtLineCaps, cdrOutlineMiterLineJoin, 0#, 100, MiterLimit:=45# s1.Outline.SetNoOutline s1.Rotate -90# Windows.FindWindow("C:Documents and SettingsdreesdmDesktopAd Stand Template.cdr").ActiveView.SetViewPoint 35#, 19.875, 100 With ActiveDocument.MasterPage .SetSize 39.75, 70# .Orientation = cdrLandscape .PrintExportBackground = True .Bleed = 0# .Background = cdrPageBackgroundNone End WithEnd Sub ____________________________________________________________________
Is this something easy I can do? Have my Macro Auto Open Upon Start Up?
Okay, so the simple macro i have been working on isnt just for personal use. We will use this macro all day long - but the issue is - my coworkers im sharing the macro with would prefer the macro open when program opens.
Now that i had set the macro's position down - how do i got about having the macro auto open upone start up.
Problem is that it doesn't type the text exactly as given. Randomly drops off the first few characters.Because hitting open defaults to the libraries instead of my server where the files are located.
When you hit open the cursor is already in the "File name:" field so if I just type the directory there and hit enter it takes me to that directory. Sure would be nice to just have it type that for me and enter. Had it working great for a few times but aftaerr navigating around for a bit it drops off those characters.
I have tried to use the Macro recorder to record the keystrokes as I get the dimensions from the top of the rectangle to each line of text & from the edge of the triangle to each line of text. Unfortunately the recorder could not record.
Is it possible to design a macro which can be used to get the dimensions as required ?
How to develop an auto dimensioning macro for CorelDraw x3. I have seen this feature built in to FlexiSign Pro. This macro would save so much time and work with consistency!!! Is it doable?
need a macro code that will select all objects that I've named "X" then delete them. Tried recording but it only works for the one object and not all of the same name
Need a macro to copy a specific file and then promp where to paste the file. Trying to make a macro to Publish to PDF with certain parameters, mainly the security password, then save to as file "X". Then Call macro to copy file "X" so I can navigate to the proper directory,paste it and rename it.
If Corel had a feature that would allow you to set your password once and it would remember it so you didn't have to retype it every time.
I did managed to Record completely the macro but it will only save over the same file every time. It would work great if I could get it to just go back to the "publish To PDF" after inputting the settings then I can name it and put it in the directory I want.
Is there maybe a macro for styles (either text or graphics) that
1. connects objects assigned with a style, to that style LIVE? eg, altering the style properties, automatically all objects assigned with that style will adopt those changes too,
2. offers LOT more configuration options than the current default CorelDraw styles options
I want to make macro for converting Vector RGB to CMYK. So I did New Macro Project > New Module > Start Rec. > Converted some vector RGB to CMYK > Stop Recording .
Then use same macro to other but it didn't work like photoshop action. VBA basic knowledge, So any easy method can some one know which can be use as macro. Or the proper method to do it.