Corel Draw X6 - The document converts automatically all objects (including text) from c0 m0 y0 k100 to c72 m58 y53 k79. No matter how many times I set black back to 100 and the rest to 0 when i open the document all black colors are again in the cmyk mix.
If you try to convert back to k100 using the find and replace command it says the document can't find that color.
I converted a DXF file to a Corel Designer file. This DXF file also has some dimensions which turned into paragraph text. This paragraph text is turned by 90 degrees. The font size is rather small, so I increased it by some points. As the paragraph text frames were now too small, I tried to increase their size. However, the text frames always jump back to their original size.
I experimented a little bit and noticed that this is only, if the text is turned by 90 or 270 degrees. If the text frame is not turned or turned by 180 degrees, you can change the size of the text frame. Additionally this problem arises only, if the option "Expand and shrink paragraph text frames to fit text" is activated (in Tools | Options | Workspace | Text). Sometimes some text frames were adapted automatically, when I changed this option. However, I do not know when which text frame was changed.
Corel Designer X6, service pack 1
I downloaded the Corel Designer Suite X6 trial version yesterday. The downloading and the installation course ran problem free. The installation was finished successfully The programs were installed on Windows 7- 64 bit platform. After the installation I started to work with the Designer X6 and it was running correctly. I tried to import a 3D dwg. file into a new blank drawing and Corel started up XVL Studio program.
I tried to import one of my existing dwg. 2013 file in the XVL but during the process an error occurred. I tried again with different versions dwg and dxf files but XVL just couldn't import the files and I always was given the same messages. "Unable to import ... file". I'd like to insert my existing 3D drawing as vector graphic in Corel in order to editing technical illustration.
I have recently started working with CorelDRAW Technical Suite X6. I am trying to figure out if there is any way to customize the Workspace, change the color of the entire background like you can do in autodesk autocad? Are there any plug ins I can download for different menu bars or completely change the layout of everything?
View 10 Replies View RelatedAlthough it may sound strange for 2D projects and rapid technical presentation drawings I have for many years used CorelDraw. I like the ease of use and usability. The problem is the speed and response program for complex drawings. That does not compare to AutoCAD or similar (Archicad, Allplan, etc.). Closest to my idea of approaching is Vectorworks. The price is also important. I welcome the mentioned speed, simplicity, 100% import-export DWG, opportunities to work with bitmaps.
View 6 Replies View RelatedIs there a way to make the foreground color the default fill color? Having to click that every time is difficult.
View 6 Replies View RelatedI have downloaded evaluation versions of Technical Suite X5 as well as X6 from Corel's website and face the following problem in both versions (both are 32 bit).
resolving this issue with the callouts:
While drawing callouts, the shape menu is not visible. I have reset the workspace several time and played with all possible options before writing on this forum. Actually, the menu did appear once but subsequently disappeared. While the menu was visible it was great to have text boxes at the end of the callout that automatically adopted to the size of the text. How to I activate the callout shapes option? I have included a screenshot of the menu from the pdf manual for your reference.
When I export to a cgm file the callout halo shows up with an outline. This happens in a program called IADS. If I drop the cgm into word the callouts and connector lines do not show up at all. Is there a reason it does that? Also some text will show up doubled or tripled sometimes when converted. If I delete that text re enter it and convert its fine. since not to many company's use cgm format anymore.
View 6 Replies View RelatedI'm writing a coursework about banks and need to insert a picture, which shows the globe in unrealistic greenish color. Someone told me about Corel, that it has eyedropper and fill tools. But I really feel missing with all those complicated tools and get tired of trying to understand what is what. How to replace the greenish color of the globe with blue one, so it looks more like of the same color as the bottom book from the stack. The rest of the things on the pic should remain their colors.
Here is the original picture that I need to edit [URL] ...
How do I change the properties of a line? I can do it before drawing. What if I want to change after drawing in PhotoPaint?
View 7 Replies View RelatedI'm trying to change the color of the border around my image from black to white. I was able to create the border. Now, how do I make it white?
View 1 Replies View Relatedi want to change the color of a bitmap that i hav in the cdr 11.
1st i draw a circle, then fill any color. then i turn that circle to bitmap by click the option "Covert to Bitmap" as RGB with 300dpi. Then i select that image, then i go to " Bitmap - Creative - Scatter". Now the image is show with edges scattered. After all these ladder i want to change the color of that image by right click on mouse from the color palatte. someone says, go back and change the color and do all these ladder. Its very difficult. i had seen this thing when i went to a printing firm near by.
Is macro can change color of the work envoronment in CD? I can't stant the white anymore.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
The appearance is totally change what i mean is possibly the brightness. Every single color in the color palette change and become a shocking color. But when i print it, they got printed normally as usual. i can't see the true color i want to use in my design. They're all become a really shocking color and too bright than they supposed to be :[URL]
View 4 Replies View RelatedI've been using an older version of Corel Draw and Photopaint for years on end (Version 10 on win XP). A recent hard drive crash has moved me to the latest version of CDR/PP (X6)in Windows 7/64.
I'm amazed to see that Photo Paint hasn't changed dramatically over the last decade - most of the tools and options are where I am used to finding them. However, one function of the latest build of PP.
I do a fair amount of video editing and I use PP to create .tga files with transparency for the timelines. In version 10 of PP, I would create an object, say a red arrow for example, >mask create from object>image / paper size / background color to red> save as .tga. The background color would appear as red and would become transparent when I changed the image properties in the video timeline to "straight unmatted." Having control of the background color is important for good transparencies in video as any fringes will blend with the objects. The issue i'm having with X6 is that no matter what I do, the background color saves as white, which causes a halo when transparency is applied in the video timeline. How to change the background color when saving a .tga?
When making a print preview the drawing is looking like it should.But when printing the file on our printers (we have tested it on 2) it comes out with no background.When we change the color mode to CYMK there is no problem printing.How can we resolve this issue so that we can print in RGB color mode without having to swap to CYMK?
View 2 Replies View Related1. How to fit properly A4 size Rectangle in the document? because after finish work when I converted the the cdr file to TIFF, it shows the image is not fit in the document and also the print does not comes out properly.
2. An other problem I have is, when I converted cdr file to TIFF and even JPEG, color of drop shadows which was black, is appears as a white color....what should I do? how to change the color setting?
BDTableTextColour_v3h.gms
I have attached a free macro to change the text color of cells in a table. Without the macro there is currently no way to select more than one cell and change the text color.
The macro allows the user to either:
click on a table (to select it) and then apply a new color to ALL text in the table; or choose a new color from the macro from, select some cells in a table and then apply that color to the text in those selected cells
Please note in step 2 it is important you choose the new color first and then select the table cells. If you do it the opposite way around, while choosing a colour you will deselect the selected cells and apply color to all of the text in the table.
cs_setInnerHtml('video_ad5e34dd-845c-4786-85b1-a1ffefea52ae','');
brushstrokes.png
I've noticed that sometimes when I use an artistic media brush around a closed path, I can't change the brushstroke color without filling the path with that color; see the attached file for an example. I thought that was just unfortunately the way it was.But today I watched Jeff Harrison's video tutorial [URL]...about making a custom brush. He applies it to a closed path, and then, to my surprise, he changes the color and it just changes the color of the brushstroke.
I followed the tutorial, made the brush, applied it to a rounded rectangle, all fine. However, when I changed the color, the center of the rectangle filled with the color as well as changing the brush color, as it always has for me in the past. So what's wrong? Do I have some setting somewhere set to the wrong thing? (I don't have Fill Open Curves checked.)
Where do I find how to change the workspace border size and color? I see no such options in TOOLS >Options > etc.
View 11 Replies View Relatedwhen I select an object there is a little x that shows the center of the object, useful when trying to locate an object in an exact spot. The x is black and sometimes it is difficult to see where it is on a dark background, so is there a way to change the color of this x?
View 6 Replies View RelatedI am making a logo design to be printed on a t-shirt. When I make the logo I am making it on an 11” x 8.5” paper size. The logo is not rectangular. When I save the logo as a pdf file, the page background is showing. I also convert the pdf file to a jpg file and the white background shows. I went in and changed the page background to No Background, It did not work. I went to Options>Page size and turned off the Show Page Border, it did not work.
View 8 Replies View Relatedcorelx4.jpg
When print an image, the color change. All the colors are different in the paper.
My printer is Canon ip4200.
Just recently upgraded to Corel X6 and the colors suddenly changes. For example: A blue box changes to purple when I try to re-open the file I have previously saved. Also, embedded raster images turns to green.
View 10 Replies View RelatedIs it possible to turn off the selection marks which appear after each drawing stroke when drawing in a freehand style with a wacom pen?
I find it very off-putting to my drawing. In Illustrator and Inkscape it is possible to draw freely without constant selection marks appearing after every stroke of the pen.
Is there a way to change the default color of the Dimension lines and text? I want it to default to black not dull green! I can change it afterwards, but can't seem to find a way to change the default color.
View 1 Replies View Relatedhow do I Change the light blue color of text selection in corel x6
View 11 Replies View Relatedwhy change the CMYK values of a color when converting to spot color in a color chart
xmp C 0 M 90 Y 100 K 0
to C0 M 87 Y 89 K 0
I am using CorelDraw 12, and recently when I try to drag a drawing, I do a left click and drag. But in doing so, depending on how far I move the object, and how long I hold the left click down, it will just continue making duplicate copies of my object. So as I drag the object, it is also copying. I have had to restart my computer to get it to stop, but this is getting old.
how to disable the drag copyiing? Everywhere I have looked, I find that people are right-clicking, so to clarify, this is a left click issue with my mouse.
When I export a CorelDraw file to Illustrator, Corel has a habit of turning all objects into transparencies. So I have to convert them back into opaque objects in Illustrator, which can take a long time since I'm doing illustrations that have on average 1000 + objects, most of them opaque. I'm using the default export settings, and changing which version of Illustrator I'm exporting to doesn't seem to work.
I'm wondering if this is a glitch with CorelDraw X5 or do I have some box checked that shouldn't be?
I have a complex (includes tints) clip art object that needs printing in a specific pantone color I just convert it to grayscale using edit>find and replace objects>color mode. then print it as a black plate and just use another color on press.
Today I had to send off artwork to another printer. Dang. How to install a macro. Import clip art to be modified to a new document, do not do this in your working document.
Use Edit>Find and Replace> Find Objects
Replace a color model or palette. Next
Leave as is except change Replace with color model to "Grayscale" Next>Replace all
Repeat 2-4 for 'outlines' if you have them.There you now have a gray scale clipart, but the fun continues!You'll need to know what pantone color you want to use. Let's say Reflex Blue. Make a square and color it Reflex blue from a pantone palette.Duplicate the square and create swatches at 90% 80% 70% etc down to white.Select these square swatches, then Windows>Color Palette>Create Palette from Selection. Save palette with a temporary name, it is only time use. Or you could call it 'Reflex Blue'Now go to this website and download the macro "limit colors" URL...
Drop it in your GMS folder in under your username to install the macro. (might have to save the drawing and restart Corel...)Once you reopen your now grayscale clipart document, Select the clipart. Run the macro (Tools>Macros>Run Macros) LimitColors.Posterize select the number of colors in your new palette if you created 10% swatches, go with 11, if you did steps of 20% then you'll do 6 (don't forget white).Run the macro LimitColors.LimitColors and select your new palette you made in step 9.