I`m new to X6 , is "PowerTRACE" a seperate program or part of CorelDraw only ? I did a full install and just assumed PowerTRACE was a seperate program as before in previous versions .
View 4 Replies
I have CorelDRAW Graphics Suite X5 trying to use PowerTrace to trace a bitmap image. The PowerTrace window does not display when I select the object; go to Trace Bitmap --> Outline Trace --> and choose one of the types to trace. No window pops up. I can only press ESC to exit the action or ENTER which does a trace but apparently a Quick trace, not giving me the chance to refine the trace.
I'm up-to-date on fixes that I know of. Version is 15.2.0.695.
Anytime I import a piece of Clipart and I go to the Trace bitmap button>outline trace>line art the program freezes immediately. The diagbox doesn't even pop up, nor does it say "not responding" at the top.
I am running Win 8 but it has been running for months without a hitch. I have cleaned out temp files and reinstalled the suite and nothing happened.
When I'm gonna write my program stops and appears a box that says Run time error and close my program. What is that, what I coul do?
View 1 Replies View RelatedI am having a difficult time getting my eps files that I have created in X5 to separate once I export them to Indesign CS4 . . . when I try to separate the file on all my postscript 2 & 3 printers machines I don't get any separations . . instead I receive a page with ERROR: dictstackoverflow OFFENDING COMMAND: begin . . I am using spot colours. . .I can import the eps file into Corel 11 and Illustrator CS4 and they work fine once I reexport them . . I can export out of X5 as a pdf and it works fine . . . I do have Ghostscript installed .
View 14 Replies View RelatedHow to separate layers on an image prior to printing?
View 2 Replies View Relatedtree wide.eps
I need to separate the limbs where they attach to the trunk of the tree so I can send them to the cutter separately. Is there an easy way to make the limb its on curve.
My program was running fine. I did not use it for a month or so and when I went to use it last week it would not launch. I just got a message that Corel Draw had to stop, do you want to sent an error message etc. I used the disk to try to do a repair, removed the program and reinstalled it a couple of times and still get the same message.
I am running windows XP
When having photos in CorelDraw, I need to edit them so I right click on the photo and select "Edit Bitmap". I am not too familiar with Photo-Paint, and wonder if I could link to another application (ie photoshop) to make my bitmap changes.
View 4 Replies View RelatedWhen using CorelDraw x5 the program seems to just randomly close, with no error message or freezing. It just disappears from the screen and I have to re-open it. I cannot pin point when it is doing it, because it keeps closing upon random tasks, not like it closes every time I try the same thing like saving.
View 5 Replies View RelatedI just recieved my x5 software yesterday and installed it, then tried linking it with the laser software and it will only go so far as to give me 2 icons instead of the 3 it should. On you tube there is a video of how to do this with the x5 program and my ingraving unit (morntech usa). Also I have all security turned off,
View 1 Replies View RelatedI'll install a font using BFN, and it still doesn't show up in the program. What gives?
Core 2 Q6600 ~ 4GB DDR2 ~ nVidia 8800 GT Superclocked ~ 150GB 10,000 RPM Hard Drive
I'm trying to Sign In inside CorelDraw X6 using Help->Sign In. A new windows pop up requesting my email and password. I indicate my credentials and click on "Sign in". But then I get this error: "This program cannot display the webpage. Most likely causes:You are not connected to the Internet. The website is encountering problems. There might be a typing error in the address"
But I am connected to internet. If I click on Account settings it works. The main problem that I have is that for any updates I need to Sign in but I get the same error!
I have problem with opening the corel draw 12 software. When i opened this, the program hangs all the time and cant access anymore.
View 4 Replies View RelatedI've done a series of system roll backs over the last week and now I cannot get any Corel program to open.
I've un- and re-installed twice but this has not worked.
I can see my .cdr files and their previews in Windows 7 but when I double click on one I get the error message "there was a problem sending the command to the program"
Is there something I need to do for a clean uninstall so I can reinstall correctly?
I'm working on a document with the necessary combination of bitmap and vector. After importing textures 300dpi (A4/24bit/jpg) the reaction slows down the program significantly, to the inability to continue working in it. Texture takes 40mega while in memory, but in my opinion it is not quite so much, it should not materially affect the normal operation. I am using CDrawX3, I tried to open it in a version 9 or 10. The fastest I came subjectively is CDraw Designer v10. But he still falls.I tried adjusting the amount of RAM for Corel or lower resolution bitmap import at 150 dpi. It's practically the same. It does not even mention the interactive transparency, or weld/trim operation, etc. I think, that the X4 or X5 are the same. Every year new version seems the same old software with the polished exterior. I'm used to work in Corel for technical drawings with lot of combination of bitmaps and vectors but unfortunately it will want to look for something else?
View 13 Replies View RelatedI keep having the experience that when I run PowerTRACE it says the bitmap is too large and must be reduced to trace. If I click cancel, X5 crashes immediately. If I click reduce it works sometimes and crashes sometimes. I tried tracing some of the same bitmaps in X3 and they worked fine. Is there something I need to change to allow PowerTRACE in X5 to run more smoothly? Is there a way to up the memory allotted to the program?
I'm running XP SP3 with an Intel Core 2 E8400 processor and 4gb of ram (3 of which XP actually knows how to use.) Not the most spectacular setup but it worked fine with X3. I tried adjusting the quality vs. performance option in the PowerTRACE settings but I can tell any difference.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
02012013010.jpg
Blank Blocks behind text and graphics
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View Related
