I just recieved my x5 software yesterday and installed it, then tried linking it with the laser software and it will only go so far as to give me 2 icons instead of the 3 it should. On you tube there is a video of how to do this with the x5 program and my ingraving unit (morntech usa). Also I have all security turned off,
View 1 Replies
I have graphics suite x5. what im trying to do use fonts (curly fonts) to make signs to cut out with my cnc laser. My question is now for i smooth off all the rough edges so when i cut them out there smooth and free flowing .
If there are better fonts to use then others or is there any easy way to smooth /soften the curves ?
We have a Universal Laser M360 that we were using Corel Draw 9 with and it worked fine. Now we are opening those cdr files in Corel Draw X5 and getting strange printing results: Missing words or sometimes whole lines. It's a really big problem for us. I have reinstalled the print drivers and even reset the CPU on the engraver. All of my RGB color settings seem correct.
View 8 Replies View RelatedI was working on an order form design the other day and my boss said we need to fill in some of the empty space, so I suggested we use a dot pattern-esque type watermark of the organization's logo that the order form was for.
For some reason when I sleceted the logo I couldnt access the change brightness contrast option in effects. So I simply made a light gray rectangle, placed it over the logo, clicked on the rectangle with the transparency tool, changed it to uniform, and changed the mode to mulitply or add or something like that. It looked great on screen, but when i sent it to the laser printer with some post script LPI or dot pattern options for the lighter grays, nothing printed out at all from underneath the rectangle.
I tried it through our copying machine, and it worked, but the copying machine has no built in halftone effects for grayscale.
Use CorelDraw X for laser engraving? I did have X3 and just changed to X5 and need to cut Ovals in Flexi Brass and the file engraved fine, but did not vector cut the Red outline.
View 10 Replies View RelatedWe do all of our braille signs using a rotary-engraving machine -- get awesome results, but very noisy. Have any of the laser engravers out there had any success doing this process with their lasers?
View 2 Replies View RelatedI have just installed Corel Draw X5 upgrading from X3. Using the program to run (2) laser engravers.
One Xenetech XLT1325 and one ULS M-300. Everything works fine until I send over a job which requires a vector cut line (hairline set to higher power to cut through plastic etc..) The vector do not appear to be recognized by either laser machine. I have tried to import the pallette that I was using in X3 but to no avail.
New to Corel Draw. We just purchased a laser cutter to cut our stencils (we airbrush), but having a VERY hard time figuring out how to prep the vector images. We follow instructions, but it seems to always have a problem. We usually separate layers on photoshop and then trace on Corel so it can be a vector, but it doesn't seem to be working. What is the easiest, most simple way to turn an image into a vector so we can send it to the laser software??? Only doing black and white, one layer at a time.
Just need simple instructions, and most seem to be WAY too complicated or always have some complication. I have watched videos and read instructions, got close, but no cigar. Sometimes I think I have a vector, but when I send it to the laser software it doesn't detect it. I need simple instructions, Simple simple!
Can I make an image a vector without tracing it? Does it have to be a bitmap to be a vector? I can't turn images into curves because the option is gray (not available). If I select hairline it puts a hairline border around the image and I don't want it cut!
Any method or, perhaps, a macro to prepare a greyscale image for 2.5D laser engraving?
The foremost items are lightest and the background are darkest. I've had a look at MacroMonster but couldn't see anything.
X5
I have a problem with CorelDraw X6.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
When I'm gonna write my program stops and appears a box that says Run time error and close my program. What is that, what I coul do?
View 1 Replies View RelatedI use X5 for creating files that can be read by a laser cutter.To combine as much object as possible on the working area i have to import the DXF files and place them.
Now i would like to know if its possible to link a obeject in a DXF auto to that same object in a X5 design.So if it is changed in the DXF it is changed in the X5 as well.
I'm having some trouble setting my workflow and I need linking data to corel draw from excel. Basically, what I want to do is to have excel data automatically copy from Excel to Draw and "Paste Special / Paste Link Objects/MS Excel Worksheet is almost what I need.
It would be perfect if only it would copy CONTENT of the Excel file or cells, not their formating (font, size, border etc.) which I want to do in Corel, since separation of the content (excel) and form (draw) would be just natural and functional - don't want my number crunchers to affect design of the Draw document, just as I don't want to have my designer to do the math
So - is there way to link objects (cells from Excel) but to transfer content (text) only or should I revert to VBA?
We like to put our dimension lines in CorelDraw 5 on separate layers from the objects being dimensioned. This way we can turn the dimensions ON/OFF depending on our needs. Unfortunately, we find that the dimensions for these objects do not move with the objects on the other layer. We have also found that certain edit operations seem to break the link between the objects on one layer and their dimensions on another layer.
How we can maintain our dimension lines on one layer, the objects on another, and prevent the problems described above?
My program was running fine. I did not use it for a month or so and when I went to use it last week it would not launch. I just got a message that Corel Draw had to stop, do you want to sent an error message etc. I used the disk to try to do a repair, removed the program and reinstalled it a couple of times and still get the same message.
I am running windows XP
When having photos in CorelDraw, I need to edit them so I right click on the photo and select "Edit Bitmap". I am not too familiar with Photo-Paint, and wonder if I could link to another application (ie photoshop) to make my bitmap changes.
View 4 Replies View RelatedWhen using CorelDraw x5 the program seems to just randomly close, with no error message or freezing. It just disappears from the screen and I have to re-open it. I cannot pin point when it is doing it, because it keeps closing upon random tasks, not like it closes every time I try the same thing like saving.
View 5 Replies View RelatedI`m new to X6 , is "PowerTRACE" a seperate program or part of CorelDraw only ? I did a full install and just assumed PowerTRACE was a seperate program as before in previous versions .
View 4 Replies View RelatedI'll install a font using BFN, and it still doesn't show up in the program. What gives?
Core 2 Q6600 ~ 4GB DDR2 ~ nVidia 8800 GT Superclocked ~ 150GB 10,000 RPM Hard Drive
I'm trying to Sign In inside CorelDraw X6 using Help->Sign In. A new windows pop up requesting my email and password. I indicate my credentials and click on "Sign in". But then I get this error: "This program cannot display the webpage. Most likely causes:You are not connected to the Internet. The website is encountering problems. There might be a typing error in the address"
But I am connected to internet. If I click on Account settings it works. The main problem that I have is that for any updates I need to Sign in but I get the same error!
I have problem with opening the corel draw 12 software. When i opened this, the program hangs all the time and cant access anymore.
View 4 Replies View RelatedI've done a series of system roll backs over the last week and now I cannot get any Corel program to open.
I've un- and re-installed twice but this has not worked.
I can see my .cdr files and their previews in Windows 7 but when I double click on one I get the error message "there was a problem sending the command to the program"
Is there something I need to do for a clean uninstall so I can reinstall correctly?
I'm working on a document with the necessary combination of bitmap and vector. After importing textures 300dpi (A4/24bit/jpg) the reaction slows down the program significantly, to the inability to continue working in it. Texture takes 40mega while in memory, but in my opinion it is not quite so much, it should not materially affect the normal operation. I am using CDrawX3, I tried to open it in a version 9 or 10. The fastest I came subjectively is CDraw Designer v10. But he still falls.I tried adjusting the amount of RAM for Corel or lower resolution bitmap import at 150 dpi. It's practically the same. It does not even mention the interactive transparency, or weld/trim operation, etc. I think, that the X4 or X5 are the same. Every year new version seems the same old software with the polished exterior. I'm used to work in Corel for technical drawings with lot of combination of bitmaps and vectors but unfortunately it will want to look for something else?
View 13 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
