CorelDRAW Graphics Suite X6 :: Dimensioning Small Distances
Jun 21, 2012
I have a problem with X6 that did not exist in X4 (have not used X5).
When I use the dimensioning tool for distances/features smaller than the dimension text, CorelDraw forces the text between the arrows. The result is the text sits over the arrows.
In X4 at the point where the item being dimensioned is smaller than the text, the dimension was put off to one side.
For example, If I were to dimension a feature that is 0.005" Clearly I would not be able to put the dimension "0.005" in that area so it should be off the end of one of the dimension arrows.
I've tried every combination of keys while drawing the dimensions. And thinking the position of the cursor at end of the command might work but to no avail. Is there a way for force the dimension text to be offset and not between the arrows?
View 5 Replies
ADVERTISEMENT
Sep 3, 2011
How can I change the default point size of the numbers that the dimensioning tool generates? Right now it is defaulted at 24 pt. and i have to manually select and change to 10 pt all through my drawings.
View 2 Replies
View Related
Jan 13, 2012
TEST.cdr
I am trying to generate some graphics for my I-phone App. Most of the images can be SVG files which works out great but some of what I need has to be PNG format. So, I need a graphic that is about 50px square and has to be a PNG file.
I have attached a CDR that is a resolution of 10000dpi but when I export to PNG and make it 50px wide it looks like ca-ca :). The problem is in my App i will need to zoom in on the 50px wide image. How can I create small PNG files that I can zoom in on and still look crisp?
View 5 Replies
View Related
Jan 5, 2013
After Update 2 and Hotfix 1 (I haven't noticed after which of them exactly it happened) some options in X6, when they are active, are receiving some grey-pink background together with the small icon near them - for example Object position, Object size, Angle of rotation and others. You will see them when you select some object.
In the same color are also some items in the menus without obvious principle. I don't think that this is intentional. Or I cannot see it?
View 3 Replies
View Related
May 6, 2011
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies
View Related
Jul 17, 2012
CS6, OS X
I can't seem to move objects in my drawing small distances..I'm used to being able to do this..must be some setting I hit, but I can't find which one it might be. I have snap to off, but this isn't behaving like snap to..it's behaving like I'm only "allowed" to move objects certain distances; any smaller and the object simply doesn't move at all..
View 9 Replies
View Related
May 26, 2013
I am printing to a Brother laser printer and a Kodak inkjet using logos in a size I have never used before. None of the content is postscript, none of it should have halftone, and none of it is bitmap-based. I have resized simple CDR and AI vector line art logos for clothing care from large size (about 4") down to 0.25" for a project I am working on. Uniform fill in black is used and some of the logos have outlines and some do not. When I print the tiny logos on the laser printer, even with a DPI or 600 or 1200, some (not all) of the lines have a noticeable saw tooth appearance under magnification, instead of smooth. Fonts that are around 5-point print with clean lines. When I print on the inkjet printer with the same DPI settings, the logos appear smooth under magnification. There may be a hint of a saw tooth, but it is barely noticeable. Font that are around 5-point print with clean lines. Perhaps I went beyond the capabilities of the laser printer, but I question that because the fonts print cleanly with much finer lines than in the logos. Note that I did notice a 45 degree halftone appearance in laser printed text with a uniform fill that was much larger than the logos, even though it is not postscript. This did not occur with the inkjet.
how I can make these logos have crisp solid lines in the tiny size I am using? I'm not printing separations. I haven't found any settings in CorelDraw X5 to fix this.
View 6 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
Jul 21, 2013
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
View 4 Replies
View Related
Nov 9, 2011
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
View 4 Replies
View Related
Jul 23, 2011
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
View 4 Replies
View Related
Mar 14, 2011
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies
View Related
Dec 1, 2011
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
View 1 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
Jun 19, 2013
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
View 4 Replies
View Related
Oct 18, 2012
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
View 3 Replies
View Related
Jan 2, 2013
02012013010.jpg
Blank Blocks behind text and graphics
View 4 Replies
View Related
Dec 6, 2013
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
View 9 Replies
View Related
May 22, 2011
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
Nov 6, 2013
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
View 7 Replies
View Related
Jun 13, 2011
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies
View Related
May 10, 2012
Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies
View Related
Jun 10, 2011
how to export png from corel?
View 3 Replies
View Related
Apr 9, 2013
Where is the QR panel on X6.3?
View 2 Replies
View Related
Mar 21, 2012
I'd like to start using Capture but it won't let me assign a hot key - it says "This hotkey is being used already by this system. Please choose another one"
As others have reported - you can't assign any key combination, and the application is useless.
is there a way to capture and by pass this problem?
I did find a solution on the Internet that says to uninstall SnagIt and remove references to TechSmith, but I'm reluctant to do that until I find out that Capture works.
View 14 Replies
View Related
Oct 11, 2013
I have been trying to find a solution to this for a couple days now. The problem is that when I convert my EPS and WMF files to JPG the results look bad. I've tried multiple programs and multiple methods. The only way I get good results are if I open the file in CorelDraw, import as curves, and Export For Web to a JPG. Otherwise, the output jpg file looks low resolution. I have thousands of EPS and WMF files that I would like to convert to JPG. Again, I can use a batch conversion program like FastStone and the results are poor.Is there anyway to automate the high quality conversion?
View 3 Replies
View Related
Oct 11, 2013
my CorelDraw files are always at least 1345 kb when I have at least one vector graphic in the file. The pdf I export from it is also that big. I made a file with just one square and it's already 1345 kb.
I just started a new cdr file and created a square, nothing else.
View 4 Replies
View Related
Jul 25, 2007
how to covert a PDF file to CorelDraw? I have tried saving the PDF as an EPS and then opening it in CorelDraw, but it only displays a grey box which states "Illustrator 7.eps".
View 14 Replies
View Related
