i've a problem with two options in the configuration of CorelDraw X4. Both option reset, after restarting the application...The first option is "Doublecklick image, to edit in PHOTO-Paint" and the second option is the performance of POWERTrace (I choose highest quality, but CorelDraw resets to better performance).
View 5 RepliesI have just installed CorelDRAW x4 and when I first used the 'Duplicate' tool, a pop up box appeared. The second time I used it, the pop up box did not appear and I cannot find how to open it again.
View 7 Replies View RelatedWhen you right click on a divider bar on the menu you used to have a option to import or export the work space,now it looks like the screen shot on the right. ( I didn't have a screen shot of X6, but it looked a lot like the X4.)Why does things that work well in CorelDRaw keep getting changed?
View 6 Replies View RelatedI am using CorelDraw to create price labels for my store. When I merge in the price field for an item I want it to show on the label with the cents in superscript as opposed to using a decimal and full sized cents text. Is this possible in any version of CorelDraw using the print merge feature?
Keep in mind that I also have the price field in an envelope so that the price takes up the full size allotted on the label whether the price is $1.99 or $999.99.
Time to increase the size of the options box as well as give it a little attention. It hasn't changed much since, ... well, forever.
Monitors are huge, so lets make it happen. I don't like having to scroll sideways with the slider to see full name of macros or tools when customizing.
There are no "initial view" options on PDF export.
View 4 Replies View RelatedAny listing of definitions for the options used in the customization tabs? I've been unable to locate any information on any of the "labels" used on these tabs. I was specifically looking for what the check-box "Workspace>>Display>>Use Offscreen Image" does. I can't see anything different by checking or un-checking...
Any comprehensive list...don't know why Corel didn't feel it should describe these options in a "? > click popup" as many of the Microsoft option pages have!
Whenever I perform a PrintMerge the print dialog and its options are reset everytime I leave the print dialog.
Usually you hit print set parameters and hit apply, you now can cancel the dialog and hit print again, your previous settings should still be there. Same goes if you actually print and want to repeat the print process, as long as you dont close the document. This works for normal printing but fails with print merge.
Every time I close the dialog (not the document) all the settings are back to default. This did not happen in X5 and is very annoying since it resets to default even if you actually hit print, forcing you to set the parameters every time.
Enable sounds in coreldraw options general section, what it does. Does it have default coreldraw sounds or windows sounds, Which sounds it alerts ? Is there any coreldraws sounds list for mouse and filter execution action sounds ? If so where ?
View 1 Replies View RelatedI use Print Preview in X4 for all printing - great tool.
When I use Print Preview in X6 the print options are not saved when I exit Print Preview to make adjustments.
I make the correction - go back into Print Preview and all options have gone back to default. Is there anyway of correcting this.
What to try on my computer to counter the frequent and destructive X5 shut downs that are happening. I've read about this problem in other threads, so I know it's not just me or my system.X5 shuts down many, many times every day. I don't think I've been able to work for 15 minutes straight yet without it crashing.
I am running a fast dual-core Intel, XP Pro SP3, 2 GB RAM, ATI Sapphire/Radeon 1GB card, oodles of hard drive space. I can run the hottest, most demanding games no problem. I run hundreds of other apps with no problem. I had no similar problem with X4 on this machine. I have no similar problem with other Corel apps, either.
X5 crashes still happen after I close down as many memory-resident apps as I can. I can't strip it down much further.I usually have a few (3-4) dockers open, one or two palettes, and my files include several bitmaps which may include transparencies or colour masks. I have about 650 fonts installed.
X5 shuts down on me many times during every work session. Sometimes when I am changing fonts, sometimes when editing bitmaps, sometimes when importing bitmaps, sometimes when applying a transparency. Bang - just shuts down. I can have Corelpaint open editing a bitmap and CD closes underneath it. I can open window to import a file and CD closes as I search the thumbnails. It closes when I click the change page tab.
Doesn't seem to be any specific act or function that closes it - it just shuts down. Gone. No warning. I lose everything since the previous save. Half the time the working file is corrupted, too, so I can't even restore it. I have to keep numerous versions on disk and use save-as with every save to keep just one alive.
I notice that the option to set memory usage has gone from the global options menu. Maybe it's bad memory management and we need that option back? I'd be happy to assign a higher percentage of RAM to X5.
I've spent some time designing a chart using the table tool. Now I want to adjust some column widths and add some text.
However, the mouse keeps trailing a small table icon, and all it will let me do is insert another table. I can't enter text, or highlight a row or column, for example. Most of the right mouse click options are greyed out.
How do I change from this mode for the mouse, with the Table icon switched on, to other modes where I can do other things with the table I have already created?(If I create a new table below this existing table, all is well. However, I can't grab the content in the earlier table to paste it into the new one.)
I work in a print shop. We do a lot of work with a printing press as well as our digital machines. Whenever we design something digitally that has grayed areas or logos, and we want to print it using our press, we need to make sure the shaded areas have "dots" so that the ink from the press will spread evenly.
In CorelDRAW X4, I used to to have it sent to the general PANTONE uncoated palette. After selecting the gray area, I would double click the color box at the bottom right, bringing up the fill window. From here, I selected the Options drop down menu, then PostScript Options. Here I could set the dots and the frequency.
Now that we've updated to CorelDRAW X5, the palette options are quite different. I want to have one centralized PANTONE unocated set that stays for everything I work in. And the big problem, is that when I do find a good gray to use (after clicking through way too many choices), the PostScript Options is grayed out and can't be clicked on.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
02012013010.jpg
Blank Blocks behind text and graphics
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View RelatedClient supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedI have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedIm using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies View Related