I wanted to attach an image as Xref to my drawing. I like to set my Xref's relative but in this occasion I get the error "Relative path cannot be assigned".
My version of AutoCAD is 2011 btw.
I am using autocad 2011. I am trying to attach a drawing as a xreg with a relative path. It keeps giving me relative path can not be assigned. I have tried saving the dwg. I have even started a new drawing and tried again but it keeps giving me the same error. All my drawing are in the same folder on a network drive. Another employee can open the drawing file from his computer and attach the same file fine. when He does it I can see the relative path. Is there a setting that I am missing?
View 9 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedProblem with lost Xref path when attaching a file using relative pathing? We are using Autocad 2010 and Windows 7. If we attach the same file using Windows XP the problem does not happen.
View 1 Replies View RelatedI have a lot of drawings that someone inserted the Xref's, but the Xref's are "Attached, and Full Path"; however, I need to change them to "Overlay, and Relative Path".
View 3 Replies View RelatedPeriodically, when I try to create an XREF using the Relative Path option, C3D will tell me that it can't use the relative path. But if I then close the drawing and reopen it, the command works just fine. why C3D sometimes fails to do this, or why closing and reopening the drawing fixes the problem.
Never saw this problem before C3D 2012.
Any variables that would cause my XREF paths to change from Full Path to Relative Path when I save a drawing?
This is something that just started happening recently and has me completely at a loss. I haven't installed any patches or hot fixes recently and nothing else has changed that I'm aware of.
I have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedOK I'm running AutoCAD Civil 3D 2012 -
So I've had this issue for a while - I try to XREF in a PDF an it just freezes up. The command line is stuck on _PDFATTACH and nothing happens. And it's not like it'd totally frozen either because as soon as I press escape it comes right out of it, so then I save the PDF down to a JPEG or TIFF and don't worry about it for a while. Still, it is quite annoying especially when I would like to use PDF Layers but can't.
I was out of town for a week and I think someone messed around with my CAD settings while I was gone. Now when I click Insert->DWG Reference, AutoCAD brings up a dialog that says: "Path to DWG file to attach:" instead of bringing me to a windows explorer type menu where I select the file to attach like it always has in the past. I can still attach xrefs by typing in xref and doing it through that menu, but what setting was changed?
View 4 Replies View RelatedFor new drawings, is there a way to program Autocad to always load Xrefs relative? We pretty much use xrefs everywhere, and it seems like it would save a lot of time if I didn't have to open the External References and change each xref to relative.
Also, if you have an existing drawing and need to change the xref from absolute to relative path, is there a way to have it automatically do that? I'm assuming there isn't, but thought I'd ask.
When I attach a titleblock as an xref in paperspace, it is not lined up on my page that I have set up. It attaches to the upper right hand corner of my screen and I have to manually move it on top of my paperspace. I know there is a way to have them automatically line up.
View 2 Replies View RelatedI have a Base.dwg where I xref-Attach a Proposed.dwg file into. I changed the Color=gray and Plot Style=Existing of the Proposed xref in the Base. Visretain=1.
I now create a Sheet.dwg and xref Base into it (and Proposed comes along too). The settings for Proposed are not what I have set in the Base file, they are what's in the original Proposed file.
Can I get these settings to come through? I cannot go into the original Proposed file and change settings.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
I have a Base.dwg where I xref-Attach a Proposed.dwg file into. I changed the Color=gray and Plot Style=Existing of the Proposed xref in the Base. Visretain=1.
I now create a Sheet.dwg and xref Base into it (and Proposed comes along too). The settings for Proposed are not what I have set in the Base file, they are what's in the original Proposed file.
Can I get these settings to come through? I cannot go into the original Proposed file and change settings.
C3D2012 W7
Tom
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
How do I get the full Xref Path name instead of Xref.dwg? I'm scratching my head is this totally under my nose... cause I don't see where the property is stored. I'm getting EV_BDR.dwg instead of C:folderEV_BDR.dwg
View 8 Replies View RelatedWhenever I use "attachimage" within a drawing, I specify relative path. I would assume that if I open the file on another computer, AutoCAD would be able to find the image as long as it is in the same folder as the DWG file. This is never the case. I always get an error message stating that the reference is missing and it asks if I want to update its location. What good is specifying a relative path then? I'm using AutoCAD 2010.
View 9 Replies View RelatedI am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
I am trying to write a standard scrpit file for a data extraction using -EATTEXT. I plan for others to use this script file on different computers, so I will not be able to put in a full file path; it will need to remain relative. Unfortunately, AutoCAD will not recognize a relative file path entered into the command line for -EATTEXT.
View 2 Replies View RelatedI am looking for a way to make xref/image path relative by default. I have not found a solution for that.
View 3 Replies View RelatedI'm trying to specify the image source for ribbon images using relative syntax but having no luck.
If I use this:
button.LargeImage = new BitmapImage(new Uri(@"c:\folderA\folderB\image.png") );
it works just fine. But it relies on absolute syntax, which is daft since it forces the code to be installed in a specific directory (or the images).
I've tried
button.LargeImage = new BitmapImage(new Uri(@"images\image.png", UriKind.Relative) );
and
button.LargeImage = new BitmapImage(new Uri(@"images/image.png", UriKind.Relative) );
and I've tried placing the images subdirectory with the png file relative to the assembly, to the project source folder and even relative to AutoCAD itself - and in none of the cases do I get an image. I'd like the images subfolder to be relative to the compiled assembly.
I’m trying to attach my deform text to my gear and make it permanent. what I was trying to do was get the text to curve and the only option I see that makes it curve the way I want it look is deform path is there another I can it I will post picture what I’m trying do and did see any video YouTube how to curve text
View 0 Replies View RelatedAutocad 2012
When attach image (tif) with no path. is saved, de image will be saved without a path. dir. Only when we change the image (with RasterCAD) when we now save the drawing the hole path dir. will be saved.
When we used AutoCAD 2006 this will not be the case. The tiff. will stay no path. We move/copy drawing with image to other dir. very often.
-Originel
... dwg/tif
-To-Built
... dwg/tif
-As-Built
.... dwg/tif
Problem is that the image will be saved in the wrong dir.
-Originel
... dwg/tif
-To-Built
... dwg/tif
-As-Built
.... dwg/tif
I have set up a master set of dwg. files we use to create our construction documents. The files consist of a master file that xrefs base files. All of our files are named using the project # first. (i.e. 2011001c.dwg). I have set up the master set using x's to replace the numbers.
Here is how it works:
XXXXXXXc.dwg (master file) relative path xref's the following files.
XXXXXXXlw.dwg
XXXXXXXvlw.dwg
XXXXXXXeg
XXXXXXXfg
XXXXXXXtitleblock
note: all of these files are saved in the same folder.
I am trying to find a way to keep the xref paths working when I copy the files to a project folder and rename the files using the actual job # insead of the x's as place holders. As it is now, when I change the drawing name the reference is lost and I have to manually change all of the xref paths in the xref manager. Is there a command, program, or lisp routine than can change the file names and update the paths automatically.
How can I do "Attach to path" [ - the same as in FreeHand...]?
[I have 10 circles in different layers... & I want them to be arranged in a certain path.]
how do you attach text to a path?
View 2 Replies View RelatedI can't seem to get my droplet working here... using CS3 on PC. Seems like I always hit this problem and have to solve it differently each time.
Anyway, dead simple goal: Create a droplet that converts any file to a JPEG and saves it back to the original file's directory.
if I drag a .gif file from my desktop on to the droplet, it should save a .jpg file with the same name to my desktop. If I drag a file named "testfile.gif" from a folder named "Test", it should create a file named "testfile.jpg" to the "Test" folder. etc, etc.
I have recorded an Action that has a single event: Export. I created that event by using the "Save for Web & Devices" function. The event includes the various JPEG formatting info AS WELL AS a save destination ("In: C:Documents...")
I have tried to create my droplet every which way - specifically:
1) With "Save and Close" selected and "Override Action "Save As" Commands" unchecked
2) With "Save and Close" selected and "Override Action "Save As" Commands" checked
I have also deleted the droplet .exe file before changing this setting (so as to get a "fresh" version).
Nothing works. My .gif files ALWAYS end up in the directory specified in the Action.
I have linked files in a realtive path /sheets/ in my adboe ai file. We are generating 10,000's of images and placing them in the /sheets/ folder. The naming scheme is the same.
However when I share this project with a friend over dropbox. ai + /sheets/ folder. When he opens it up he's getting a ton of errors about the files not being found.
Does illustrator ignore linked file locations if the path isn't ABOSULUTE? Or if the newly generated images are overwritting the previous ones?
How can I fix this because we are looking at 10,000's of large image reaplcments that will take DAYS of mannual labor?
How do I set a folder as a relative path to where the script is running?
is there any easy way like in unix, starting without / ?or for example
"~/Desktop/"
"/users/<login>/desktop/"
seems that path to me is the only way...
is there an easy way to change posix paths to applescript??
I have this code:
tell application "Finder" to set templateFile to (container of (path to me) as string) & "Graficas FINAL ADQAT.ai"
with this error: error "No se ha encontrado el archivo Macintosh HD:Users:Vibra:Desktop:Graficas FINAL ADQAT.ai." number -43 from "Macintosh HD:Users:Vibra:Desktop:Graficas FINAL ADQAT.ai"
the file is there how I change the filepath to be compatible with applescript?
I am trying to attach an object to a motion path but when i do the object goes to the beginning of the path but when i move the time slider nothing happens and when i move the object it isn't attached to the path.
View 8 Replies View RelatedI know how to change this in illustrator is it possible in draw?
I want to be able to specify the line weight of a path to be either centred on the path or inside/outside the path. How do I do this?