I made a new A4 layout, but wanted to change the format to A3. Then I usually have to resize the picture frame so it fits a A3 and not the too small A4. But this time the "resize" frame is gone and I don't know how to solve the problem?
View 1 RepliesI have a brush which is rectangular frame, i want to apply it to a square image.The only method i can see to resize the brush just constrains it and makes it a smaller rectangle...
Any way of resizing the height and width separately?
(Ulead Videostudio version 9). I am trying to compile a number of clips of tv into 1 programme, the problem is that some of the clips are not full frame, but half size widescreen etc. Is there a way in video studio to convert all of these clips to full frame etc, so the whole programme looks the same or do I use a different piece of software. Another question, what is the max lengh of dvd output you can use the software before it loses picture quality, some of my recent productions have been poor quality picture wise, even though the input picture quality has been high.
View 1 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedI created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.
View 8 Replies View RelatedI come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
I need to be able to re-size images that are large than 1MB in order to put them on our MLS site.
My previous computer had 2 arrow icons on the desktop.
One was for re-sizing horizontal pics and the other for re-sizing vertical pics.
I could simply drag/drop the image file onto these re-sizing icons and they would be re-sized.
The smaller file size thumbnail would appear on the desktop.
How can I get these re-sizing tools on my new computer's desktop?
I am using CS6.
I create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
how to convert a frame into an empty text frame using a macro?
View 1 Replies View RelatedI am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.
View 2 Replies View RelatedI'm working on a german keyboard.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I'm designing some photo frames and as they come in loads of different sizes, I'd like to be able to make the frame design bigger, in illustrator, but keep the width of the actual border. i.e. at the moment it's for a 10cm x 15cm photo with a 3cm wide border going all the way round - I want to keep it 3cm for larger photos.
and here's a link to the .ai file: [URL] I have loads of other frame designs which will need similar treatment so I'm looking for a general solution rather than something that is totally specific for this design.
It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
View 1 Replies View RelatedHow do I creat a frame inside a frame? Elements 4.0
View 2 Replies View RelatedI am having problems Xref ing a drawing of my new title block to paperspace. The plan is to try and have it as the default title block whenever I select to layout a drawing
View 5 Replies View RelatedI want to put some blocks in a key (on a TitleBlock, in PaperSpace). I have imported my garden as an Xref - does the access to those blocks not come too? And if not, how do I import them - or do I have to open the Xref and copy each over individually?
View 3 Replies View RelatedFor those who are using paperspace and want to dimension your modelspace 3D part.
1. Create a new dimstyle called 3D Standards (copy from your already standard dimstyle), the only thing you are going to change is the text alignment, change it to align with dimension lines.
2. In modelspace use your 3 point UCS and select 3 points on part how dim. will lay. So, if you need to dim. top, then pick 3 points on top, ect...
3. Change the dimscale to reflect the same scale as the viewport.
4. When finished dimensioning your part, select (Changespace) and select all dimensions (if you want all your dimensions to be in paperspace.
I am editing a short avi clip converted from a 1959 8mm film in the timeline. The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask. I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip.
Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful. Previous feedback recommended methods to mask the edge. Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect.
My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame. Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
How do I save frame by frame in the timeline?
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
A file created over a year ago (I believe with AutoCAD 2010) is needing to be updated. I have AutoCAD 2012 and when I open it there is no text in my Paper Space. However, if my manager is to open the same exact file with his AutoCAD 2012 he can clearly see all of the text is still in place. Is there a setting somewhere that I have missed that may be making the text not show up? All layers are on and visible.
View 5 Replies View RelatedI've got an Educational Version of AutoCAD Map 3D 2010...
I'm trying to plot a drawing and my icons have disappeared.
Did I press something inadvertantly, where have they gone?
I'm writing an essay with pics and so luckily I have a scren-grab to show you...
And what happened next...
I am not having any luck getting intersectwith working in paperspace? I'm not trying to intersect with objects in model space, just all objects in paperspace.
View 2 Replies View RelatedI've worked on a command that automatically imports a dwg into paperspace and positions it. I've just realized that when imported vertically, the titleblock is on the wrong side of the layout. I've imported it to (10,10,0) and would like to import to those exact opposite co-ordinates to essentially flip it but i'm a bit unclear as to how. I know that I can use the commands Database.PextMax and Database.PextMin to determine the max and min points of the primary layout, but what co-ordinates are these, are they the top right corner and bottom right corner.
For what it's worth, here's my routine:
string dwgName = HostApplicationServices.Current.FindFile(comp, acadApp.DocumentManager.MdiActiveDocument.Database, FindFileHint.Default);
Database db1 = new Database(false, false);
db1.ReadDwgFile(dwgName, System.IO.FileShare.Read, true, "");
ObjectId BlkId;
BlkId = doc.Database.Insert(dwgName, db1, false);
BlockTable bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead, true);
[code]....
when it comes to viewports in paperspace in 2013, due to the nature of my work i have several layout drawings all drawn on top of each other and all with ther own txt and dims etc, which again is all on top of each other making it impossible to work in model space, for this reason i work in paperspace within a viewport but now i have upgraded to 2013 while i am in mid command e.g. dimension and zoom into first point then zoom back out and in again to second point, by this time i have been kicked out of the viewport and just in paperspace so cant complete the command, doesnt always happen?
View 9 Replies View RelatedWhilst dimensioning in paperspace I dont seem to be able to get the dimesions to sit above the drawing in model space. for example if I place a leader across the drawing to a specific point the leader sits under the drawing and is lost/hidden. how I set the dimensions to sit above the drawing.
View 1 Replies View RelatedWhen I make a layout with a part of my drawing in a viewport, I switch over to paperspace to draw dimension lines in it. Although the layout is displayed in another scale (e.g. 1:100) it puts the right dimensions at the drawing.
But now a problem appears:
With one of my drawings the layout does not put the right dimensions at the drawing in paperspace. I really don't know what went wrong. Strange dimensions appear, as if there must be a strange scale factor somewhere. (Dimlfac=1)
I am having difficulties with the scale of my drawing. In my model space, the units are set to decimal - millimeters. And then, when I set up a viewport in paper space even 1/128"=1'-0" is too small. I'm using a size 24"x36" paper. Everything is set to 1:1 and I drew 1:1 in model space. Previously, another person drew this drawing and it fit on an 8x11 sheet of paper at 1:10, but mine doesn't fit on 24x36.What did I do wrong?
View 9 Replies View RelatedWhen working in paperspace trying to setup for a plot Autodesk decides to "freeze" my screen locking some of the drawing on the screen only removable by reopening the drawing.
View 1 Replies View RelatedTrying to change the ltweight settings in paperspace but nothing is working!
View 9 Replies View Related