I upgraded my workstation to 64bit recently. I have a problem with the plot files created in my computer are darker / stronger color than the color assign in the ctb. FYI, my plotter is a network plotter HP design jet 1055 cm which is install in a 32bit server. Does this has to do with the autocad color table or the printer?
View 0 RepliesAutoCAD - Why does the Normal plot style plot in color? Black seems to make a lot more sense. Almost everyone in Architecture uses black prints most frequently so that should be the default. And you can't adjust Normal to all black. So what was AutoDesk's reasoning?
View 9 Replies View RelatedI am an experienced Autocad user, and plotted with ctb files. I installed 2013 and plots come out not as i want. Although i assigned a ctb plot style, lines come out according to an unknown plan to me. I attached the file. It seems that the lines are influenced by the ctb file, but some colors are fadded I found it. i had to assign the color black to all colors, since it plotted with colors, on the black and white plotter. But a new problem arose. now i don't see colors when i am in the layout, all lines are white!
View 2 Replies View RelatedCan users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
I can not plot in color! Using Civil3d 2012 64 bit. Plotting to a HP DesignJet 5500 which I think is set to use the new driver for 64 bit. I have tried everything I know. Been doing this many years and I have never ran into this one. Used CTB ACAD, None and tweaked a few of my own. The funny thing is if I have an image that will plot in color and the other funny thing is I can send the same plot to a HP Color LaserJet 5550 PS (standard office size) and the dwg plots just fine in color so I'm thinking it has something to do with the 64 bit side of things.
OS=WIN7
How do you plot a PDF-file from a cad drawing that shows the color of background - gray for instance? I use gray as background color to see other colors better but the PDF-file turns out with white
Background which makes yellow lines for instance almost impossible to see.
I receive drawings from a company that uses a custom color of 0,0,255 in their drawings and it plots out blue even on monochrome. How can I make a pen setting so this plots out black?
View 5 Replies View RelatedI am currently trying to figure out how to use ACA 2012.
A client wants me to add flooring zones to a few sets but I cannot get them to print in color. I assume I do this from my pen assignment but I cannot figure out what colors they are to change them.
I do my zones by using Home>"under build" space>from the properties I click Zone 0-15>polygon and then I trace the rooms. Then it fills the room with a preassigned color. How Can i figure out what colors they are using so I can edit my pen setting or is there an easier way to print zones in color and the rest in B&W?
how I set up my plot style manager to print color and maybe explain why it isn't printing color now?
View 3 Replies View RelatedOLE objects does not plot in color. The OLE object is in a title block that its being reference to the working drawing. Is the are referencing setting we can manipulate to resolve this issue?
View 1 Replies View RelatedI am trying to plot a drawing and am using a .ctb file that is not a color .ctb file. When I go to plot the plot wants to plot in color. Is there a setting in Options or somewhere that would be causing this?
View 3 Replies View RelatedIs it possible to plot using a few different .ctb files? For example can I assign one .ctb file to the landscape xref drawing and another .ctb file to the architectural xref drawing and a third .ctb file to the civil xref drawings? It has been very time consuming to coordinate all the separate drawings to use one .ctb file.
View 2 Replies View RelatedWe are attempting to move from using ctb plot files to stb plot files but we are stumbling out of the gate. How to convert an existing drawing over?
View 5 Replies View RelatedI draw using different colors for the different layers I use & I am trying to print drawings using a plot file that I can manage my line weights and shades. In my plot dialog box I used to get a drop down w/ the different choices of plot files (for different clients) but that drop down no longer shows up in my plot dialog box.
I also checked the plot style table search paths in the options window and those paths show do not exist. I created the path as shown but to no avail.
I have several dxf files that were provided for laser cutting purposes. I have attached one file as an example. I am able to open the file and choose layout 1 and print. If I choose a 1:1 scale the image is very tiny in the corner of the page. If I leave the settings alone and just print, it is a full page, but the part on the paper is not the correct dimensions. The dimensions are in the gif file I also attached.
When I print the dxf file the gap between two of the holes, for example, that should be 70mm is actually like 95 or so. I have acad lt 2004 but also trueview 2011.
I am doing some engineering drawings in ACAD 2011. I use multiple colors on-screen to discern between certain items, then plot everything in black, like I'm sure almost everyone out there does. However, I would like to print only lines of a certain layer in differing colors. Is there a way to have that one layer print in a different color besides black, yet still use multiple colors on-screen?
View 6 Replies View Relatedall of a sudden in AutoCAD 2013 and C3D 2013 my printing dies on me. usually it won't even print anything and when it does it prints WYSIWYG, no effect at all from the color table.
Some toggle I accidentally hit? (That Gizmo thing is suddenly showing up too)
I am using Autocad 2012. When I plot I go to change my plot styles, all I see is STB files. Where did the CTB files go? They are on my computer but not showing up in my style list.
View 2 Replies View RelatedDWG to PDF is not printing certain files correctly. It appears to only happen with the dots hatch pattern and the Dots linetype with a 0.0003" lineweight in the CTB file. The lines with the issue have color and pline width (zero). Print preview show, plotting to a printer, and using adobe show the lineweight correctly but using DWG to PDF does not.
C3D 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
Because of the problems with wipeouts, I have switched to using some solid hatch set to colour 255. The hatch is in paperspace, sitting under titleblock and other Layout text. I am plotting to an HP1050C, using a .ctb file with 255 set with grayscale off.
The plot preview is fine, but the hatch blocks come out black on paper. I thought this was the problem with wipeouts, and that hatch didn't suffer from it.
I am having an issue trying to create a template using my correct line widths. Some of my plots are fine while others are too light. I know it is related to my plt file settings, but I can't seem to assess how to locate them in the plt file and then determine which is which (ie: the good ones vs. the incorrect ones)
View 1 Replies View RelatedMy attempt to plot all related files form an ".iam" resulted with the following code. The code as is working for us. We use an eight digit number for file name. Plotted PDF will have revision added to file name. Any chance of making an addin or iLogic code for similar functionality?
Private PDFPATH As String'FOLLOWING CODE USES CODE FROM URL...AND OTHER PLACES INCLUDING INVENTOR HELP.Public Sub PrintRefFiles() 'BOMQuery() ' Set a reference to the assembly document. ' This assumes an assembly document is active. Dim oDoc As AssemblyDocument Set oDoc = ThisApplication.ActiveDocument Dim ASSYIDW As String ASSYIDW = oDoc.FullFileName ASSYIDW = Replace(ASSYIDW, Right(ASSYIDW, 4), ".idw") If Dir(ASSYIDW) <> "" Then 'Debug.Print strDisplayDim oDrawDoc As drawingDocument Set oDrawDoc.
[code]....
When I go to plot, my plot styles table only shows .stb files. I have a bunch of .ctb files that exist in the plot styles folder, and everything is pathed correctly but the .ctb files do not show up in autocad. How can I get these files to be available?
(They do show up in some drawings for some reason though, just not when I create a new drawing file.)
Is there a way to set up batch plot so it saves the files on it's own? Right now I have to wait for the box with the name to pop up and then I hit OK and then have to wait for each file like that?
I found a setting and changed it from "Prompt for name" and changed it to "Specify Name" but that did not do the trick.
the ctb files do not appear in the drop down list in the plot dialog box. I have checked the files and are located in the correct directory. Also have verified that the files are being pointed to in the options dialog box.
View 2 Replies View RelatedI am unable to plot PDF files from my AutoCad 2011. Plots OK in Word etc so Windows 7 printer seems ok. Get error message : Job: - Canceled
Job ID: 8
Sheet set name:
Date and time started: 4/07/2011 11:48:32 AM
Date and time completed: 4/07/2011 11:48:33 AM
UserID: user
Profile ID: AutoCAD 2011 Prosteel Ribbon
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: - Canceled
File: D:ProjectsP079 - PDG Engineering for Standard Stacking ConveyorC DrawingsdwgsP079-BMSPR01-0000-SS-DR-0059 to 0066.dwg
Category name:
Page setup:
Device name: Adobe PDF_A3.pc3
Plot file path:
Paper size: A3
MESSAGE: Error : A StartDocPrinter call was not issued.
ERROR: The device has reported an unknown error.
Job: - Canceled
I don't need the capability to print directly to a plotter, but I need to set up a dummy plotter to generate plt files that will be changed to tif files with our Kip. Any plotter driver that works for this situation? Every one I have tried has generated a plt file, but the Kip would not convert it or open it.
View 8 Replies View Relatedrunning autocad 2010
Is there any way to reset plot files in publish without opening each drawing indvidually and resetting the plot file?
Why files received from different architects affect how my plot style prints? I'm using my set plotstyle but plots are almost too light to read. Layers are set to default line weights in both files. This printing problem happens in both model and paper space. Using AutoCAD 2012 standard.
View 8 Replies View RelatedWe just upgraded our old DJ4000 to a T2300 and are having a devil of a time getting the PC3 files to work. We have about 40 CAD users and the PC3s are all on a shared network location.
[URL]
We tried using the 5500 and 4020 drivers but they did not work for us.
It looks like we are now faced with deploying 30+ PC3s to 40+ computers. What a HUGE pain in the you-know-what that will be. All of the PMP will have to be repathed.
What was HP thinking? That the T2300 -- or, if the above-referenced thread is accurate, ANY of their plotters -- are not suitable for use in companies that have more than one or two users?