AutoCad :: Pipe Fittings Dynamic Blocks
Sep 24, 2012
I am currently freelancing for my current boss and have a question regarding dynamic blocks. We deal in water and waste water drawings, so I deal with pipe fittings and such. Right now the other guy working with us (former coworker also) has blocks for each and every fitting.. So the block library is big..
I would like to reduce the size drastically and think dynamic blocks can work with that.
So basically, to start with, I attached a dwg of a 3" blank flange (which is the end of the pipe basically)..we have these blocks going all the way up to 24"..seeing how its just the size that changes, i would like to create a dynamic block that will do this for me by just selecting the size i need.
Problem: I forgot how to work with dynamic blocks!!
This is just a simple flange block that i want to start with, than once i get this down and learn about them i will update the rest (bends, reducers, tees, etc)
Also, I am using 2012 release..what release did dynamic blocks come out in?
View 5 Replies
ADVERTISEMENT
Feb 14, 2010
find some blocks of pipe fittings for DESIGN CENTAR, which will be easy to use. I have found some but every fitting is in different cad document.
View 9 Replies
View Related
Nov 1, 2011
I'm searching for blocks of all types and sizes of threaded pipe fittings.
View 5 Replies
View Related
Apr 20, 2013
When I create a new pressure network in 2014 - I have only Tees & Elbows available - Where are crosses? I need a 4-way cross at an intersection, C3D seems to include just the other two types I listed.
View 3 Replies
View Related
Jul 15, 2013
I am currently using C3D 2013 for pressure pipes. how to rotate a TEE with the branch pointing down in plan? Currently the TEE will come in with the branch pointing only horizontal in plan.
View 3 Replies
View Related
Apr 17, 2012
The default parts catalog is a good start, but for production watermain design, it is lacking. How do I add new fittings and appurtenances to the content catalog? I know how to add/modify existing pipe/fittings properties, but there does not appear to be a way to add new fitting models.
View 9 Replies
View Related
Oct 3, 2003
I've visited C. Bliss's web site and downloaded the Sch 40 PVC Elbows by Tom Cross - but am in need of a much larger selection of fittings. Need traps, Y's, Tee's and sweeps.
View 2 Replies
View Related
Nov 3, 2011
I have created custom pipe fitting categories in my server based content center. I copied the standard familes over to a custom library and modified them. After updating the family tables, and hitting refresh in an assembly, the updates fail.
This is the error I get:
Failed: Standard is owned by Tube&Pipe. The part must be refreshed by Tube&Pipe application.
These parts were placed via "Place from content center" as I do not have the tube & pipe addin (2011 suite, not pro)
How do I get these compnonents to update / refresh??
View 4 Replies
View Related
Apr 4, 2012
C3D 2013. I am trying to determine how do add additional content to the parts library.
I have explored the Content Catalog Editor and have been able to add new pipe materials, but it appears that the only way that I can import a part is with a .CONTENT file. Is there any documentation on how this file is supposed to be configured or created? Is there any documentation on the Content Catalog Editor in general? We need to be able to add new pipe, fittings, valves, appurtenances in order to make this new feature usable in a production environment.
View 9 Replies
View Related
Jan 2, 2012
I am trying to add some connection points to flanges that we have ion our Content Center. I am having difficulty. I can get it done if I re-author the flange from scratch, but not if I attempt to modify an existing part.
My workflow:
Get a custom fitting to my localEdit itRun the Tube and Pipe Autor toolAdd my additional connectionSaveFrom the content center editor run Replace Family Template on the original family
This doesn't seem to work.
View 6 Replies
View Related
Jun 11, 2013
How do I model (or calculate) the fewest welds/fittings required to change angle and elevation in a pipe run, as shown in Option1 below.
For this example the constants are: 8" standard steel pipe, one of the fittings is a standard butt weld 45 (12" radius), bend angle is 70 degrees, and the elevation change is 9". The custom fitting is cut from a standard 8" long radius 90.
Note: Option2 is just shown for reference, I'm only interested in solving Option1
Bend with Elevation change.gif
View 9 Replies
View Related
May 21, 2013
I have created d/blocks for my different pipe sizes i.e one block with a dropdown to select the different sizes and have done the same for my flanges. now how do I link / insert the flange d/block to the piping block so that I can export the information into a material list later on.
View 1 Replies
View Related
Jun 5, 2012
I would like to make a 1" long, 1" diameter straight pipe as a block. I would like to insert that block into my drawing, say...on a 90 degree elbow. After inserting the straight stub, I would like to use a grip to "stretch" the pipe length to the next fitting. Ultimately, I would like to compile a parts list for my pipe drawing that will give me the straight pipe length. I've been doing some searching and 3d dynamic blocks seem to be impossible.
View 2 Replies
View Related
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
Mar 15, 2012
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
View 7 Replies
View Related
Apr 23, 2013
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
View 2 Replies
View Related
Sep 7, 2012
is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
View 2 Replies
View Related
Jun 1, 2006
Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
View 4 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 13, 2013
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related
Nov 21, 2011
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
Nov 7, 2011
I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
View 4 Replies
View Related
Feb 15, 2012
usage of dynamic title blocks with visiblity states and defining page setup override templates which use same for quick plotting using sheet sets.
I have attached a simple dynamic block that I built which is the outter frame of our company title block, it is designed to allow users to quickly switch between Landscape and Portrait orientations.
The problem I am having is when I go to define page setups for my Sheet Set Page Setup Override Template I am unable to use the "Extents" option with auto-center because the "Extents", as defined by the page setup, includes ALL objects in the paper space regardless of visibility, so my title block ends up being centered in a stupid way if that printing configuration is used.
The only solution I have found is to use the "Layout" option when defining page setups, but this option produces other issues in other ways when printing. I don't want to use the "Window" option either for the potential for users to be using the page setup overrides to print drawings using different paper sizes or drawings that were not originally created using the current template the override is designed to accomodate.
Is there perhaps a system variable that defines whether invisible objects are included in the "Extents" setting in the page setup? I'm sure you'll all agree that Extents is the way to go in this situation, but it is not performing exactly as required.
View 5 Replies
View Related
Mar 26, 2012
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
View 4 Replies
View Related
Jul 16, 2010
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
View 9 Replies
View Related
Sep 18, 2013
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
View 1 Replies
View Related
Feb 4, 2011
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
View 9 Replies
View Related
Oct 11, 2012
What is the variable to change the dynamic grip parameter size and color.
View 3 Replies
View Related
