I have a drawing where I adjust the scale in a viewport and I'm able to pan around and leave it without a problem. When I come back to the viewport, however, I lose the scale and it zooms way out on me. All I am doing is double-clicking inside of the viewport.
View 7 Repliesam in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedHow do I scale without losing resolution? I'd like to make the image smaller without it becoming blurry
View 3 Replies View RelatedWhen I scale a viewport, I normally type in the scale I want into the Viewports toolbar. So if I want the viewport to be 1 to 25, I type in "1:25". I have done this for years. Now all of a sudden, I have started a brand new drawing, setup the company border as A1. Then typed in "1:25" into the toolbar, and it zooms RIGHT in so you cannot see the drawing. But when I use the old fashioned command:
zoom - scale - 1/25xp
It works perfect. Why this is happening with the toolbar?
I have just installed Autocad Architectural 2011 (64Bit) on my computer, since my laptop was struggeling with running autocad 2009.
I have opened a 3d model of my building (created in the 2009V) in Cad 2011, played around a little bit and am now at the point of having to create some viewports to plot elevations etc. But now i am stuck, i have created a viewport, selected it and can't figure out how to set the scale. I saw there was a 'button' (that is not working?) on the bottom, saying 'Vieport Scale', i can't click on it to change the scale, so i went to properties. When i select 1/100 Standard Scale, it automatically goes back to Custom Scale and sets it to 0.005. Basically nothing happens! The only way it changes the scale is when i double click on the viewport and zoom in/out on my building. But that can't be the only way to do it?!
I have got a deadline coming up, and really can't work on my laptop again as it keeps overheating and crashing on me! How to set the scale of my viewport and actually get it to do it?
recently upgraded to a new stand alone LT 2012 on brand new machine.I only work in metric millimeters. When I open a new drawing and set up a viewport on a new layout tab the viewport scale list is as one would expect i.e. 1:1 1:2 1:4 1:5 1:10 1:25 1:50 etc etc
when I open an existing drawing I only have the option of imperial scales i.e. fractions. I have tried simply adding the most commonly used scales to the list but once the drawing is saved and closed, they have disappear when reopened.
In c3d 2013 in the layout tabs when I hover over the annotation scale for the viewport it automatically changes the viewport like a "preview" of that scale. Is there a way to shut that off?
I ask because I believe it is altering my annotative point descriptions so I have to regen everytime my scale changes to see if the scale will work or not. A co-workers computer doesn't seem to preview and it works fine on their computer my preview appears to mess the annotation up on mine.
i have in model one drawing, in layout i have 4 viewports, each have different scale, now.. how can i using same model and 1 layout to determine scale of dimentions per each viewport? or all viewports in same layout have same scale of dimention?
View 5 Replies View RelatedI double click in the viewport; under misc the annotated scale is in the list but not the standard scale. I want to set the scale for the viewport. Why doesn't the standard scale show as on option? Or, how to I set the scale in my viewport?
I'm using autocad LT 2008
I have a serious problem with AutoCAD placing improperly scaled dimensions within viewports. I have a drawing where half of the dimensions are correctly scaled and the other half are off by as much as 4 times their value. This occurs randomly without any rhyme or reason- and sometimes occurs whenever a drawing is opened. I know of a couple of drawings that if I simply open them, a dozen dimensions will scale up to 12x their intended value. It has happened to everyone on my staff. We are using LT 2011- but I have had a similar problem using 2004 & 2007 full seats.
View 4 Replies View RelatedI have tried to find if my problems has already been addressed but cannot find any reference.I am adding a value to the scale list in 2012. The list goes from 1:20 to 1:30 and I want 1:25.
When I add in the drawing it is still there in subsequent edits. When I create or edit another drawing the value is not in the list!!
Is the viewport scale list default needing to be edited elsewhere for it to become a global change because no matter what I try it only stays resident in drawings I edit the viewport scale list!
Viewport. I have scaled the viewport to 1/16 in paperspace, but the drawing is to large and does not fit in the viewport I need to zoom in to make it fit.
View 4 Replies View RelatedIn paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
How to set the annotation scale for a viewport in version 2012. I am not having any success finding what the variable is that needs to be set. Is this possible?? If so, how?
View 3 Replies View RelatedIs it possible to scale a viewport with different X and Y values? Kind of like inserting a block with different X and Y values.
View 8 Replies View RelatedWhy in layout in viewport scale in these two file different ??? with same scale 1:60???!!! i cant find answer in file f-metric scale 1:60 while in e metric 1:300 to be same file F-metric ??if you make it 1:60 in file E-metric view will not same ?? what the reason ?
View 2 Replies View RelatedI've always been taught to set the LTSCALE to the scale of my vport, and set psltscale to 0 (Civil Design). And it has always worked great until I came to work at an Enviromental Consultant frims, that likes to mix units and do stuff the hard way. But thats beside the point.
I've read multiple post about setting the LTSCALE to 1 or .5 and leaving PSLTSCALE to 1 or whatever. There are TONS of post about it.
The reason I'm bringing it up is because EVERYBODY in my drafting department sets the LTS to 1, then manulipates the linetype scales individually threw the properties. This drives me absoutly insane!
So if I have a drawing that the vport is to 1:80, what should the LTSCALE and PSLTSCALE be set to?
I'm using AutoCad 2010.
When I change the scale in a viewport and later want to access the viewport by dubbel clicking in the viewport, it keeps changing the scale to zoom extends. How can I access the viewport without changing the scale? It worked before but now it keeps changing.
What these properties in a viewport mean to the overall scale of a drawing:
1. Annotation scale
2. Standard scale
3. Custom Scale.
I have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
Seems this question comes up often so I put this together. If there are any errors or omissions
Options for setting Viewport scale.doc
In 2012, when I click on a viewport and try and to change the scale, in either quick properties or the properties window custom scale. AutoCAD only allows the standard scale settings, not a custom one. I think this is just a matter of some setting, but do not recall it.
View 5 Replies View RelatedWhen I setup my viewports for my sheet I have a viewport that I set the viewport scale to 1:5. This is not showing up correctly and zooms the drawing off the sheet. When I go into the viewport and use the zoom to scale 1/5xp the scale is correct and totally different than the viewport scale 1:5. Since all my annotative text and hatching is set to 1:5 1:10 and 1:100 the annotations do not work since viewport scales 1:5, 1:10 and 1:100 are showing up incorrect and do not correspond to the correct zoom factors of 1/5xp 1/10xp and 1/100xp.
View 7 Replies View RelatedIn paperspace the text are so out of scale and it only shows a specific area of the model view.the other viewports will have a realistic and 2d wireframe.
View 5 Replies View RelatedI am using version B.219.3 (UNICODE) of Autocad Civil3d 2008 with service pack 2 loaded.
I am putting together some plan and profile sheets for a civil roadway job.
The annotation scale setting of the text in the profile xref and alignment xref is being ignored in the sheet file viewports. This text should be appearing at 1:40 scale, automatically, same as the viewport scale, but they are appearing very small instead. According to the way annotation scale is supposed to work in Autocad2008, this annotation should be appearing at the correct scale, automatically.
If I try to adjust the annotation scale to a ratio I think will work, it automatically adjusts the viewport scale to match whatever I enter for an annotation scale. What to try next.
Can files become corrupted in AutoCAD? If so, are there utilities to repair corrupt AutoCAD files?
The properties palatte has both these scales listed. In theory, they can be different.I would love to be able to plot my drawing at 1:1000 with the civil objects & labels scaled to 1:500 so they don't overwhelm the plan. It would seem I should be able to simply set the viewport to have a standard scale of 1:1000 and annotation scale 1:500 and be done. But it doesn't work. It will always scale the annotative objects to the standard scale.
My workaround is to scale my sheet double size and plot it half size, to trick the Civil objects & labels.
We have a number of drawings, where the views in paperspace viewports are not orthogonal to the XY plane. Is there any way that we can adjust the viewport view to a TOP view (a view aligned to the XY plane) without changing the viewport scale?
If I activate the viewport and use either PLAN or View->TOP my viewport scale is destroyed, and the view is rotated along the Z-axis.
I can't seem to change a viewport in layout view to show my drawing properly. No matter what I do the page only shows a very zoomed in view or a very zoomed out view. I have tried all menu options witht he word scale in, including the scale list. I have looked in the properties inspector.
View 5 Replies View Related