How to calculate in AutoCAD the Conversion factor. I need to calculate the complete Building Floor and I try the field command in AutoCAD, But I don't know what I should write to conversion factor.
View 9 RepliesI am trying to use the FIELD function to automatically display the Y value for floor levels. I have chosen 'object', then selected a line (floor level line lifted to the correct height in the Y axis) then selected 'start' as the property to display, Format: Current units. The problem is the current units are mm but I want the floor levels displayed in Metres but when I try to change this by using the 'Additional Format' button the 'Conversion factor' box is greyed out so I cant convert the value and it wont let me manually edit the Field expression or else I would manually add [1e-007]
View 9 Replies View RelatedI would like to change the conversion factor of meters to feet to a more accurate value rather that 0.3048. In my place we use the meter to feet conversion with 3.2808333. It makes a lot difference when the decimals does not carry up to 7 decimal place.
View 3 Replies View Relatedim using field to calculate area but my problem is that i have to write everytime in additional format the conversion factor,prefix and suffix...
for example
current value is 39690.0
conversion factor 0.0001
preview 3.9690
how can i save and use allways the same conversion factor and prefix (Area.),suffix(m²)
When using mtext and a background mask and try to modify the border offset factor from the default of 1.5 , the factor reverts back to 1.0. If I type in 1.25 or 1.75, it will not save it and revert to 1.0. If I put in a larger number like 2.0 or 3.0, that factor will be retained.
View 4 Replies View RelatedI recieved a dwg file from an architect (away on vacation and can't reach to ask). I'm working on a kitchen layout and the scale is off by a factor of 12. My symbols are much too large and if I draw a 36" line it comes out to be 36'.
I've gone into Format-Dimension Style and don't see what to correct in this area. Obvioulsy I can expand the drawn item by a scale of 12 to make my blocks fit but obviously screws up the dimensions...
And yes, we're still running AutoCAD 2000
I have a few horizontal lines parallel to each other. I'd like to make all of those horizontal lines longer by multiplying their length by a factor (let's say 2)
The scale command doesn't work as I intent, since it makes the spacing between those lines "x" times greater as well.
Which command should I use?
Created a block, from another, already in drawing, save block as (4bay window to three bay inwdow)
When in insert, the scale factor is set at 1000 and I cant change this. My only other way around it is to explode a 4 bay, make it a 3 bay, then use the create and retain as block. 1:1 scale in model space same in block editor. how can i change the scale factor?
In the attached report, safety factor is se to calculate from ultimate tensile stress (485 MPa), and it indicates 1.33 with stresses:
Von-Mises: 323 MPa..............SF = 1.5
1st principal: 303 MPa.............SF = 1.6
2nd principal: -181.2 MPa....... SF =2.67
So, how is inventor getting 1.33 ?
EDIT: if I set it to calculate from yield ( 260 MPa) it accurately reports SF = 260/323=0.8
EDIT: added part file
I have a part that I want to have made by rapid prototyping that will in turn be used as a pattern for casting alloy metal parts. I need to apply a factor to the part to compensate for the shrinkage that occurs when a metal part is poured in a molten stage and will cool to slightly smalller dimensions than the mold. Is there an easy way to do this without having to recreate the part to slightly larger dimensions?
View 2 Replies View RelatedI am asking user for scale factor and insertion point. but the actual image always display width and height as the scale value, if i insert value of 5 for scale factor width and height will be 5 but not according to coordinates system.
but if i insert the same image manually width and height are calculated by autocad according to scale factor before insertion.
double scale = promptDoubleResult.Value; var xAxis = new Vector3d(scale, 0, 0); var yAxis = new Vector3d(0, scale, 0); var ucs = document.Editor.CurrentUserCoordinateSystem; using (Transaction trans = database.TransactionManager.StartTransaction()) { RasterImageDef rasterImageDef = new RasterImageDef(); rasterImageDef.SourceFileName = imagePath; rasterImageDef.Load();
[code]......
When i select icons with a scaling of 1.000 it is very very small, and I have to set it to around 30 to have a decent size with normal zoom.
But I have just importet a circuit breaker as a .dwg and when I import that one it is huge! I have to scale it to 0.1 or something.
How can I set a uniform scaling factor for the icons?
It is Autocad electrical 2014. I have also tried with different sheets, but it does not seem to work.
I am having trouble with width factor in Model Space. I change the width factor and it seems to change but when I print it has changed slightly but not to what it has is model space. I dont really want to have to check the print preview to see if it is correct. Is there a way of displaying the correct width factor in model space?
View 3 Replies View RelatedI have in my drawing about 2000 block of trees, and I would give them a bit of variety. Is it possible somehow to randomize the scale factor of these blocks for example between 0.75 and 1.25? I wouldn't do this job manually..
View 9 Replies View RelatedI have a drawing with the model space set at 3/16" scale. I've never worked like this before (I obviously always scale in layout space). However, I need to get this drawing back to normal scale so I can work on it.
How to use the scale factor on this to get model space from 3/16" to 1:1.
To import the point along an alignment into Civil 3D, I need to introduce a scale factor. But by adding the Scale Factor column to the points and modify one of the formats in the Civil 3D to accept the scale factor, change was not affected to the initial state (without adding a column to a scale factor). I got the points, regardless of the scale factor and now, I want to add a scaling factor for the points.
Windows7 64bit
AutoCAD Civil 3D 2012
how to apply geoid / scale factor for transformations?
I need to get UTM zone 11 in WGS ellipsoid to ground coordinates.
I'm trying to create a report on a stress analysis I've made. Reading the report I don't find any result on safetyfactor. When I was browsing the forum I found a thread concerning safety factor and a report file attached. My report is missing some of the information that I found in this attached report (such as "result summary".
View 2 Replies View RelatedI was trying to find out, how to change the width factor of multiline attribute and I failed.
The only way was to change the width factor of texstyle the attribute uses.
Is there a way to override this property for a single attribute? And if not, is there some reason for that?
Any way, using iLogic, to get the K-Factor from a flat pattern sheet metal view on an idw drawing and add it as a note.
I'd like a rule that would access the flat pattern on the drawing, get the K-Factor value and then create a note that says, for example, "K-Factor Value = 44".
I see in the iLogic Snippets there's a Get Active KFactor under the Sheet Metal section, but I don't know where to start.
I'm inserting an xref, and its coming in at a weird scale.... I noticed that in the 'external reference' dialog box the 'block unit' scale factor is set to a weird scale (.0394), but it will not let me edit it.
View 5 Replies View RelatedI'm new to autocad and came from Metric system country. now I have hard time switching to Imperial system.
1- is there any comparative scale factor between metric and imperial? for instance 1:20, 1:50, 1:250 and so on, compare to what in imperial?.
2 - in the unit dialogue box, if i use metric i only can choose Decimal not any other options like Architectural , engineering..etc. right?
3- if I want to draw in cm or m not millimeter I mean input my distance in cm or m while drawing how to do it?
4- if I want to open a metric drawing in a imperial model space how to switch from M to inch.
I have created a project in a metric template, then found that the scale factor is haywire. Is there some way to rest the template with out loosing my work or changing anything other than the physical line properties?
Second, I have loaded the same file onto another students file who's scale factor is A OK and metric. My file LOOKS fine but when i start to add lines or dimension all the properties are imperial.
i want to ask is there any scale factor function in Autodesk Inventor 2012?
this is because all my drawed part are already full constrained and I want to enlarge it to some factor?
How can I to modify (exaggerate), the vertical scale factor of the surface when I am seeing on the object viewer option.
View 4 Replies View RelatedI have a couple of field book file related questions
1. Can you apply a grid scale factor to measured distances when importing from an fbk file? You can apply using coordinate transformation if importing from csv file but I need to use FBK files to allow the user to make changes to the observation data of the points. As far as I can see the translate survey database command allows you to shift easting, northing, rotation and elevation but not scale. There is mention of a workaround at the following link but I could not locate this on the Civil Community.
[URL]....
"The Survey Data must first be imported from the FBK into the Survey Database, then translated/rotated in the Survey Database using the Survey Addition available from Autodesk Civil Community website, or some other third-party solution."
2. Also on fbk files, I have manually typed in alphnumeric point ID's for the point number in the field (see fbk file attached, file extension changed). When importing the resulting fbk file into Civil 3D the point ID's come in under point name and I cannot determine where it is getting the point number from? Opening the fbk file in notepad I do not see any of the point numbers that are getting assigned to the points in C3D. Where these numbers are coming from? Also is it possible to import alphanumeric strings as point numbers using fbk format?
Using description keys would require manually entering in the point ID as an attribute with each point (it automatically appears if added as point number with incremental identifier). This doesnt seem like a big deal but tI may have up to 10,000 sections to survey with 250 points in each section so it would be time consuming.
The neww line expressions for Grid distance are phenominal. My problem is getting them into curves. All I want to do is apply the grid scale factor to the curve length and radius, but I can't narrow down the parameter. The Drawing Scale conversion links to the annotation scale. I've also noticed people just scripting in the value, but that doesn't work when the majority of the office doesn't operate at that level.
Also, I work in grid and need to convert to ground. I noticed that the system only does ground to grid, so I'm inputting an inverted scale factor to get the results in need in my distances.
I am trying to xref a base drawing. But everytime I insert the drawing, the scale factor always comes up to be 12. I tried changing it, but it won't let me. I have attached an image of the problem I am getting.
View 1 Replies View RelatedFor some reason when I edit text and dimensions in model space the text will go huge and my text is non-annotative. If i change it in properties box it does not multiple it or if I am editing text though a viewport it will not multiply. Example - if I have style set to 4 (height) and I create mtext.
Then I decide that I want text to be 5 so I double click on mtext and highlight the text and change to 5 and the text will instantly be 200 not 5, but if I change in properties box it will stay at 5 or if I am in a viewport and change the text by double clicking and highlighting and then changing it to 5 it stays at 5. My issue is for whatever reason only in model space is the text being multiplied by a factor and I cannot figure out why this is happening.
How to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies View RelatedC3d 2011 64 bit.
I created a property ("PLAT") for Parcels and want to hyperlink it to a PDF. How do I make that happen?
Do I have the ability to limit my layers to my Zoom Factor? I see other GIS Maps that have layers limited per how far you are zoomed into the drawing.
Can i adjust my Map Feature 'hatch' to be more faded per our color table or even send it to the back and still have the abiltiy to list my features after i publish to DWF?