Created a block, from another, already in drawing, save block as (4bay window to three bay inwdow)
When in insert, the scale factor is set at 1000 and I cant change this. My only other way around it is to explode a 4 bay, make it a 3 bay, then use the create and retain as block. 1:1 scale in model space same in block editor. how can i change the scale factor?
I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
I am having trouble plotting to scale, I have a large drawing which is set up in metres so I understand I need to scale up the figure by multiplying by 1000 but the problem is: I set up my paper at A1 and then zoom and adjust to an acceptable scale which turns out to be 1:850 by typing in .85xp, once drawing is printed to scale it is not 1:850 but 1:1185 approx, the thing is using the exact same method if I scale to 1:1 equivalent to 1:1000 the drawing IS to scale. Using design jet 500 and Autocad LT 2011.
View 9 Replies View RelatedI am having some problems getting the hang of applying the drawing scale to my assignment. I understand the scale factor that is applicable to the printing only and that AutoCAD doesn't care about the units used...but something is not clicking here and I'm sure it is pretty simple. My assignment requires me to draw 3 simple structures at 1/8" scale on 11X17 paper. Each house is 20' long with 10' walls and each is done in absolute, relative, and polar. I actually completed the work with all 3 formats without specifying the scale or paper size, just to get familiar with the commands. But now that I am trying to set the dimensions correctly, I cannot replicate my work because I'm getting lost in the way things are defined. I am using AutoCAD 2005, also have a 2002 version to which I can defer.
View 9 Replies View RelatedHow can i transform 1000 lines to 1000 polylines ?
View 1 Replies View RelatedI recieved a dwg file from an architect (away on vacation and can't reach to ask). I'm working on a kitchen layout and the scale is off by a factor of 12. My symbols are much too large and if I draw a 36" line it comes out to be 36'.
I've gone into Format-Dimension Style and don't see what to correct in this area. Obvioulsy I can expand the drawn item by a scale of 12 to make my blocks fit but obviously screws up the dimensions...
And yes, we're still running AutoCAD 2000
I am asking user for scale factor and insertion point. but the actual image always display width and height as the scale value, if i insert value of 5 for scale factor width and height will be 5 but not according to coordinates system.
but if i insert the same image manually width and height are calculated by autocad according to scale factor before insertion.
double scale = promptDoubleResult.Value; var xAxis = new Vector3d(scale, 0, 0); var yAxis = new Vector3d(0, scale, 0); var ucs = document.Editor.CurrentUserCoordinateSystem; using (Transaction trans = database.TransactionManager.StartTransaction()) { RasterImageDef rasterImageDef = new RasterImageDef(); rasterImageDef.SourceFileName = imagePath; rasterImageDef.Load();
[code]......
I have in my drawing about 2000 block of trees, and I would give them a bit of variety. Is it possible somehow to randomize the scale factor of these blocks for example between 0.75 and 1.25? I wouldn't do this job manually..
View 9 Replies View RelatedI have a drawing with the model space set at 3/16" scale. I've never worked like this before (I obviously always scale in layout space). However, I need to get this drawing back to normal scale so I can work on it.
How to use the scale factor on this to get model space from 3/16" to 1:1.
To import the point along an alignment into Civil 3D, I need to introduce a scale factor. But by adding the Scale Factor column to the points and modify one of the formats in the Civil 3D to accept the scale factor, change was not affected to the initial state (without adding a column to a scale factor). I got the points, regardless of the scale factor and now, I want to add a scaling factor for the points.
Windows7 64bit
AutoCAD Civil 3D 2012
how to apply geoid / scale factor for transformations?
I need to get UTM zone 11 in WGS ellipsoid to ground coordinates.
I'm inserting an xref, and its coming in at a weird scale.... I noticed that in the 'external reference' dialog box the 'block unit' scale factor is set to a weird scale (.0394), but it will not let me edit it.
View 5 Replies View RelatedI'm new to autocad and came from Metric system country. now I have hard time switching to Imperial system.
1- is there any comparative scale factor between metric and imperial? for instance 1:20, 1:50, 1:250 and so on, compare to what in imperial?.
2 - in the unit dialogue box, if i use metric i only can choose Decimal not any other options like Architectural , engineering..etc. right?
3- if I want to draw in cm or m not millimeter I mean input my distance in cm or m while drawing how to do it?
4- if I want to open a metric drawing in a imperial model space how to switch from M to inch.
I have created a project in a metric template, then found that the scale factor is haywire. Is there some way to rest the template with out loosing my work or changing anything other than the physical line properties?
Second, I have loaded the same file onto another students file who's scale factor is A OK and metric. My file LOOKS fine but when i start to add lines or dimension all the properties are imperial.
i want to ask is there any scale factor function in Autodesk Inventor 2012?
this is because all my drawed part are already full constrained and I want to enlarge it to some factor?
How can I to modify (exaggerate), the vertical scale factor of the surface when I am seeing on the object viewer option.
View 4 Replies View RelatedI have a couple of field book file related questions
1. Can you apply a grid scale factor to measured distances when importing from an fbk file? You can apply using coordinate transformation if importing from csv file but I need to use FBK files to allow the user to make changes to the observation data of the points. As far as I can see the translate survey database command allows you to shift easting, northing, rotation and elevation but not scale. There is mention of a workaround at the following link but I could not locate this on the Civil Community.
[URL]....
"The Survey Data must first be imported from the FBK into the Survey Database, then translated/rotated in the Survey Database using the Survey Addition available from Autodesk Civil Community website, or some other third-party solution."
2. Also on fbk files, I have manually typed in alphnumeric point ID's for the point number in the field (see fbk file attached, file extension changed). When importing the resulting fbk file into Civil 3D the point ID's come in under point name and I cannot determine where it is getting the point number from? Opening the fbk file in notepad I do not see any of the point numbers that are getting assigned to the points in C3D. Where these numbers are coming from? Also is it possible to import alphanumeric strings as point numbers using fbk format?
Using description keys would require manually entering in the point ID as an attribute with each point (it automatically appears if added as point number with incremental identifier). This doesnt seem like a big deal but tI may have up to 10,000 sections to survey with 250 points in each section so it would be time consuming.
The neww line expressions for Grid distance are phenominal. My problem is getting them into curves. All I want to do is apply the grid scale factor to the curve length and radius, but I can't narrow down the parameter. The Drawing Scale conversion links to the annotation scale. I've also noticed people just scripting in the value, but that doesn't work when the majority of the office doesn't operate at that level.
Also, I work in grid and need to convert to ground. I noticed that the system only does ground to grid, so I'm inputting an inverted scale factor to get the results in need in my distances.
I am trying to xref a base drawing. But everytime I insert the drawing, the scale factor always comes up to be 12. I tried changing it, but it won't let me. I have attached an image of the problem I am getting.
View 1 Replies View RelatedHow to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies View RelatedWhen some off our users move the dimensions in paperspace or the drawing in modelspace,
only some off the dimensions would see the viewports scale factor, and multiply itself by that, from my knowledge this happens when you uses the power dimensioning in Mechanical, and the the annotative tick box is selected, but for some reason one particular user he uses normal annotations when dimensioning, where there is no annotative functionally but the dimension still behave as mentioned.
Product design suite standard 2013
I’ve got a series of third party drawings that are quite intricate, with a series of nested blocks, some of which cannot be exploded.
The issue i have is that they have been drawn with a global scale factor of 1. Our office works with a global scale factor of 10.
Is there a quick and easy way to make the global scale factor 10, but then somehow retain the scale of the third party drawing lines so they retain their look?
Trying to avoid either just drawing with a global scale factor of 1 (which is a pain as all our blocks are set up for global scale factor of 10) or going into each of the bound xrefs and making all line scales 0.1 (mammoth task given the amount of drawings and all the nested/unexplodable blocks).
How to print a viewbase layout with a large scale factor? The problem I'm having with ac2013 is that the print is coming out with jagged edge.
View 9 Replies View RelatedIn our office cutlines are made up of polylines. When I use this in an annotative drawing I cannot get the polyline to change with the scale factor. Is there a way to make the polyline annotative?
View 4 Replies View RelatedI have a client who is working on the edge of a MGA coordinate zone - as they are near the edge of the zone their scale factor is large and needs to be factored in to all setouts (it makes 50mm of difference over 100 metres.)
their previous solution has been to work day to day at 1 to 1 scale and then xreference this back into a MGA projection by using a scale factor around a single point false origin.
As they are moving away from this false origin - the scale factor is changing slightly.
Is it possible to create a user grid at 1 to 1 for the day to day use and then query this into a MGA drawing. via ADEQUERY to bring it back to MGA ?
Is there anyway to determine how much a piece of artistic text has been changed in it's X-Scale? If I insert some text into my drawing using the Text tool, then grab the left handle and drag it in, I see the X-Scale: in the status bar go from 100% to whatever I drop it at. But if I go back to that piece of text, or select another piece that was compressed or expanded, and try the same trick, the scale factor resets back to 100%.
How can I determine the amount of change from the initial font the text has changed after the fact? None of the property boxes show you this information.
When using mtext and a background mask and try to modify the border offset factor from the default of 1.5 , the factor reverts back to 1.0. If I type in 1.25 or 1.75, it will not save it and revert to 1.0. If I put in a larger number like 2.0 or 3.0, that factor will be retained.
View 4 Replies View RelatedI have been trying to draw in mm, i.e, when i draw a line 1000 i want it to be 1000 mm. but currently when i do that i'm getting a line way too long, cant even zoom out to see it fully. i can only draw shorter lines (ex. 30) to be able to see it fully.
View 2 Replies View RelatedWe are a water utility and have thousands of detail drawings of service taps and hydrant connections (maybe 11,000 total). These are in the old Microstation J format. Each drawing is divided into a top half and bottom half. The bottom half of the drawing is the actual drawing portion.
The top half of the drawing is text that comes out of an Old Oracle database, into Microsoft Word 2000 through mail merge then is copied and pasted into the top portion of the card. Newer drawings done like this and opened in AutoCAD have the top portion identified as an OLE object (embedded object), while the older drawings just look like a drawing in the top.
I'm looking to update the system to ArcGIS and AutoCAD. The data will be moved to a Microsoft Access database (probably later SQL Server), and I want to convert all the old Microstation drawings into an AutoCAD format. ArcGIS will provide the basemap and be linked to the database, with clickable hyperlinks to open the AutoCAD drawings. I would like to be able to keep the bottom drawing half while changing the top half of each drawing to reflect updated data in the database. If this can be automatically updated, that would be awesome.
One is the best program to automatically bulk convert the drawings from Microstation J to AutoCAD (I have 2011). Also, I'm looking for a method to display the text from the database in the top portion of the card using either mail merge with AutoCAD or some automatic method of pulling the info out of the database. Can I just copy-paste this info into AutoCAD as we did with Microstation or is there a better way?
for seafloor mapping. My biggest one so far consisted of 15.000 images. Unfortunaletly, I can't do them in one step, I need to produce submosaics of up to 250 images and then stitch them together manually after rendering.
Since I reach limits, some exchange of thoughts concerning "extrem photomerging" would be great. Has anyone of you similar experience with photomerge compositions that big?
What hardware would you recommend for maximum photo merge performance (PC only)?
Unfortunately, with CS3, Adobe eliminated the option to load the images to the image tray only, without any attempts of Photoshop to merge the images first. This sucks, of course. So I have to use CS2 still for the composition and CS3 only for rendering. Does anyone know whether CS4 has got the manual option back?