AutoCad :: How Disabled Regeneration Print

Jun 12, 2013

how disabled regeneration print ?

View 9 Replies


ADVERTISEMENT

Photoshop Elements :: 11 - Print Disabled After Page Setup

May 4, 2013

I just got Elements 11 and it's not going well.  The most severe bug is that if I click on Page Setup..., the print dialog becomes non-functional.  Page Setup... and Print... buttons no longer do anything when clicked.  The problem persists until I quit and relaunch Elements.  Sometimes I can work around this by configuring everything in the Print window alone, but this prevents setting Elements options for custom paper sizes.  I've already tried resetting Elements' preferences.  All other apps, including the older version of Elements I had, print without problem.
 
MacOS 10.6.8
Adobe Editor 11.0
Brother HL-2170W 4.5.0
Canon PRO-100 10.66.0.0
  
Console:
Craploads of __NSAutoreleaseNoPool leak warnings
*** Assertion failure in -[PSCocoaMenu itemAtIndex:], /SourceCache/AppKit/AppKit-1038.36/Menus.subproj/NSMenu.m:779

View 10 Replies View Related

AutoCAD Map 3D :: Raster Image Regeneration Freeze

Apr 25, 2013

I'm having an issue where the more I zoom into a drawing that has a raster image (a 1mb jpg) in it, regenerating times become increasingly long until the whole program just freezes. When I zoom back out, it's fine.

I've tried changing the file type, saving it with a different program, lowering the quality to Draft, zooming in on an area that the raster image wasn't in, lowering the DPI of the image, nothing works. I've spent the last two hours searching Google for a fix, found nothing. The only thing that seems to work is if I put the image on a layer and freeze it. The problem there is, I'm tracing over the image, so it being invisible makes it rather difficult to work with.

View 2 Replies View Related

AutoCAD Architecture :: Speed Up Regeneration Time

Aug 12, 2009

I found several methods to alter the regen times, but not ways to SPEED them up.For example: I switch from layout tab to layout tab and my regen time can be up to 30 seconds (I know, doesn't sound long, but it's killing me).How do I speed this up??

View 9 Replies View Related

AutoCAD 2013 :: Hide Command - Cannot Select Anything Until Regeneration Done

Dec 18, 2012

We just started using autocad 2013 after many years on autocad 2005.  I am working on a 3d model, and whenever I do a "HIDE" command, everything looks OK, but I can't select anything until I do a regen.  This was never a problem in 2005. Some of the drawings I work on are quite intense and using the hide command would definitely work with selecting the proper objects.  Why can't I select or find endpoints or centers any more after doing a hide?  

View 1 Replies View Related

AutoCAD Civil 3D :: Why Doesn't Exist Automatic Regeneration Superelevations

May 13, 2013

If I have calculated the superelevations and then edit the alignment (for example,I  modify the length of spiral), the superelevations doesn´t recalculate. Why?

The guitar (superelevations) in profile view is old. If I load again the style profile view, the data are the same about superelevations.
 
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit

View 3 Replies View Related

Photoshop :: 3D Functionality Is Currently Disabled Due To OpenGL Being Disabled

Nov 6, 2013

I opened a file I had been working on yesterday on a different Mac, and got the error message: "3D functionality is currently disabled due to OpenGL being disabled." I am currently using MacBook Pro (2008), running Mac OS 10.9, using PhotoShop CC. I've already looked at Ps Preferences>Performance and I see this.

View 15 Replies View Related

AutoCAD Civil 3D :: Undo Has Been Disabled?

May 9, 2012

Undo has been disabled in order to prevent undo file overflow...

Is there anyway to increase the Undo capabilities.

View 9 Replies View Related

AutoCAD Inventor :: Sub-assemblies Disabled In BOM?

Apr 24, 2012

I'm trying to change the BOM structure of some sub-assemblies from "Normal" to "Phantom". However, some are displayed as disabled and therefore do not allow any changes/overrides. How can I enable these in the BOM?

Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro

View 4 Replies View Related

AutoCAD Inventor :: Stress Analysis Disabled

Nov 13, 2013

I have used a few times 'Stress analysis' before. Today I discovered it is disabled. I applied a software update (SP1, build 222), after which I could run a Stress analysis again. However, Inventor crashed soon, and after restarting it, Stress analysis is disabled again. In 'Add-In Manager' the 'Simulation: Stress analysis' is shown as 'Automatic/Loaded'.

UPDATE: I have unchecked the 'Load Automatically' option for this module, quit Inventor, started it again, loaded the module and now it seems to work. I don't know yet for how long...

UPDATE2: well I could start a Stress analysis, but everything is disabled there, I can not create a simulation for example.

View 1 Replies View Related

AutoCAD LT :: Quickproperties Disabled Yet Still Pops Up - How To Turn Off

Mar 20, 2012

The attached images show that quickproperties is not checked, yet while selecting objects the quickproperties dialogue box will randomly appear against my desires (I am unable to continue selecting objects once quickproperties is displayed).

View 5 Replies View Related

AutoCad :: Z Axis Movement On Gizmo Disabled

Nov 5, 2012

I'm using 3D Max Design. I am unable to move an object on the Z axis of the gizmo. When I attempt to do so, a yellow line follows the path of my drag. I can move an object up and down only if I drag by all 3 axis.

View 4 Replies View Related

AutoCAD 2010 :: Paste As Block Disabled?

Jun 19, 2013

I have encountered the paste as block command of using AutoCAD 2012. i exploded the block and modified. After that i select the objects that i exploded and want to create another block again. I could do it before now most of the time when i select the objects and used the commond option " copy with base point" . When i select the base poing it took about 7-8 seconds( which is supposed to be very long) and in the commond line it display as Img-1. After i selected the base point..again it will take a few seconds and display the following Img-2 & Img-3. And my autocad performance is really slow nowadays. Any option i can do for faster speed? Especially whenever i select the object i hv to wait about 3 seconds.

View 9 Replies View Related

AutoCAD Inventor :: ILogic Editor Window - Zooming Disabled?

Jun 4, 2012

I know for certain that I used to be able to increase/decrease text size in the iLogic code editor window, possibly with the ctrl + mouse scrollwheel similar to many other programs.

I tried showing this to a coworker this morning, and discovered it doesn't work any more. Was this functionality removed in IV2012?

View 1 Replies View Related

AutoCAD Inventor :: How To Change File Check In / Out Status (option Is Disabled / Greyed)

Feb 15, 2012

I am trying to use a shared project with my other colleagues. Problem we are having that we are not getting into how to change the File Check in/out Status (option is disabled/greyed) . Do we required administrative rights to do that?

Note: We don't have vault.

View 4 Replies View Related

AutoCAD Civil 3D :: Undo Command - Disabled In Order To Prevent File Overflow - 2014

Jun 12, 2013

Undo Command still turning off (disabled) constantly even after dumping the temp folder, and the turn off, turn on solution does not seem to work either.

Any solutions to this nagging issue other than re-install?

View 2 Replies View Related

AutoCAD Inventor :: Shaded View With Edges Is Disabled In Dynamic Simulation Autodesk 2012

Dec 5, 2013

I am not able to see the model in shaded view with edges in dynamic simulation environment (Autodesk Inventor 2012).

View 6 Replies View Related

Photoshop :: CS6 3D Disabled

Dec 29, 2012

Yesterday I signed up for Adobe Creative Cloud and delightedly started exploring the 3D features in Photoshop CS6. It worked perfectly well and there were no crashes.
 
This morning the Adobe Application Manager said there was an upgrade for Photoshop CS6 with "New Features". While it was downloading I watched some 3D tutorials. Then when I opened a file in Photoshop with the intention of putting what I'd learned into practice, I got the following message:
 
"Photoshop has detected graphics hardware that is not officially supported for 3D, and has temporarily disabled 3D functionality. Updating the driver of your graphics card may resolve the issue.
 
Check the manufacturer's website for the latest software."
 
I have an iMac with an NVIDIA geforce 9400 256mb graphics card. It therefore cannot be upgraded as it is built-in, nor is there any sign of updated software either from Apple nor NVIDIA. So this is my introduction to the Adobe Creative Cloud. Something works for one day and then is "upgraded" and ceases to do so!

View 14 Replies View Related

Photoshop :: Save For Web Disabled In CC?

Sep 14, 2013

I had a problem with the Save for Web feature being disabled and just wanted to share the solution that I found. First, to describe the problem: Save for Web was grayed out and nothing I tried could get it back. It wasn't a problem with the image color mode, bit depth or anything like that. Rebooting my Windows 7 PC did not work.

Deleting my preferences did not work. Ultimately, what I had to do was uninstall/reinstall Photoshop CC. Now, it's working fine again.

View 10 Replies View Related

Photoshop :: 3D Features Disabled

Sep 21, 2013

I am interested in finding out how to enable Graphics features in Photoshop CC. I am using Windows 7, with Intel G41 chipset and even though the box is checked next to "Graphics Accelerator", I still cannot use the 3D features.

View 1 Replies View Related

Photoshop :: Save For Web Disabled

Sep 29, 2013

all of a sudden my Save for Web is disabled in Photoshop CC for all files, including files that I have sliced and saved for web before. I have tried restarting to no avail.

View 1 Replies View Related

Photoshop :: CC - Save For Web Disabled

Oct 11, 2013

I have photoshop cc and has been disabled "web save" get it working again?

View 6 Replies View Related

Photoshop :: Contract Disabled

Jan 2, 2009

why can't I contract from the edge of my document in CS4? this worked fine in CS3... I use this method a lot for making 1px borders

Select All
Select > Modify > Contract (1px) done...

but in CS4 if the selection is touching all 4 corners this option is disabled!?!? or any corner that it is touching won't contract... help!

View 9 Replies View Related

Photoshop :: ACR Disabled Since I Upgraded To 5.3

Apr 9, 2009

I have the upgrade in the correct location, but now ACR has been disabled in both PS and Bridge. However, in PS, when I look under Help>Plugins, I see it listed there. I have PS CS4 running on Windows XP. I downloaded it several times and removed the older download,(I have only one Camera Raw plug-in in the folder.)

View 1 Replies View Related

Photoshop :: CS3 Fit Image Disabled?

Feb 12, 2009

Photoshop CS3, with all updates.

Menu File - Automate - Fit Image has suddenly become grayed out.
Grayed out in menu, and batches fail to access it too.
Actions fail with log entry:

Error: The command "Fit Image" is not currently available. (-25920)
Sometimes the error is command "Canvas Size" is not currently available (also in the batch).

Batches earlier today using it worked OK, no problems until now.
Have tried rebooting, still grayed out and does not work.

View 1 Replies View Related

Photoshop :: CS4 Tools Disabled After...

Feb 6, 2009

problem with the tools in Photoshop CS4 that only exists after watching a video. After watching a video online (You Tube, for example) or watching a video in Windows Media Player, all the tools stop functioning.

CPU: Core2Duo E6750 2.66GHz

Operating System: Windows Vista Ultimate - 32 bit

Memory: 2GB DDR2 800(PC2 6400)

CS4 opens without a problem. I can open any file (.psd, jpg, etc)and it loads. When I go to click on a tool, nothing happens. The only tool available is the "hand" tool. Nothing else works. None of the tools are dimmed out either.

I have found that by logging off and then logging back in, or restarting the computer clears the problem.

View 1 Replies View Related

Photoshop :: Right Click Disabled

Feb 18, 2009

In all of the previous versions of CS as well as Version 7 you could Right click anywhere on the top bar of a "floating" image and see options to do the following:

Duplicate

Image Size

Canvas Size

File Info

Page Setup

I cannot do the same thing in CS4. Why would they disable this option? Can we change it back to the way of the previous versions? If so how? Who do we complain to about this?

I am not a fan of the opening images into the window so all you see is the file number followed by the "X" so you have to go to "Window" then choose "Arrange" then chose either "Float in Window" or "Float all in Window". I like to be able to see all of my images and make a choice when viewing them as to which I am going to work with first. Can we make a permanent change to the way the program operates?

View 11 Replies View Related

Photoshop :: Filters Disabled

Jun 26, 2008

For some reason, alot of my filters in Photoshop CS are disabled (grayed out)

IE: Artistic

Brush Strokes.

Ocean Ripple,

Glass.

View 1 Replies View Related

3ds Max :: Assign To Selection Is Disabled?

Aug 2, 2011

I am having problems assigning materials as when I do the 'assign to selection' is disabled - what to do. I have tried everything but there must be something that I have not done.

View 2 Replies View Related

3ds Max :: Drag And Drop Disabled?

Feb 21, 2011

I'm running Windows 7 here at work and I can't drag and drop scenes into the max viewport, or texture maps into the material editor or any sort of the dragging and dropping that I can do on my home computer or any of the other computers that run max here at work.

I'm using 3ds max design 2011, I'm running it as administrator and everything is up to date. I also can't drag and drop into photoshop, but I can drag and drop to the desktop and from one folder to another. So either both of my programs, on this computer only, had some setting disabled, or it's the OS. But like I said, I can drag and drop within Windows just fine.

View 5 Replies View Related

Lightroom :: 4 Print Module - Print And Print One Tabs Greyed Out

Nov 25, 2012

In LR4 print module the print and print one tabs are greyed out and I can't reset.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved