I'm in the process of dimensioning a building with multiple layers but my Dim Ticks aren't working properly. On the first floor layer state the ticks show up for the first floor layer dimensions but also for every other floor but when i switch to dimension a 2nd floor the ticks are gone. I've looked through all of Dim Style settings and there seems to be no explanation for why this is happening .
View 1 RepliesI will receive printed out drawings that are entirely drawn with the use of ordinates, putting the 0,0 point in the corner of the part, and dim everything from that corner. Like this example:
The problem I'm having is when I recreate the parts digitally and have multiple parts to dimension, I can do one that looks as clean as the ordinate version, but the rest are dimensioned using the baseline tool, and look like this:
Though it works, it takes a while to make it nice and legible for my print out version. And most the time the parts are more organic and don't have any corners, but this is the best example for my question.
I know I can't have multiple 0,0 points in model space, but I was hoping there would be a better way to achieve the clean look of the ordinate points. Or perhaps create a reference point that can be duplicated, moved, and the ordinates will recognize.
Note: As much as I'd like to use paper space to dimension my parts, I can't.
I am creating a part that consists of a series of intermediate Lofts. The various Loft termination profiles are sketched on a series of stacked planes, most of which are parallel to one another. I have a Work Axis (oriented at an angle off of true vertical) that penetrates all of these sketch planes, essentially forming a "central axis" for my part. Most, but not all, of my sketch planes are normal (perpendicular) to that axis.
I want to use my "central axis" as a reference point in each of my sketches, i.e., the point where the axis intersects the sketch plane. I am having a minor difficulty.
When I project my central axis into a sketch whose plane is normal (perpendicular) to the axis, Inventor displays a reference point where the axis penetrates the plane and I can dimension my sketch geometry relative to that point. Conversely, no such point is displayed when I project the axis into a sketch plane that is NOT normal to the axis.
Is this correct behavior? To have a dimension able point on my "non-normal" sketch planes, must I create explicit Work Points to mark the intersection between my Axis and such planes, and then project those points into the related sketches?
I am working on a project where I need to bring in multiple building site files from Revit as .adsk files to one Civil 3D model. The first building always imports just fine. For any building after the first, I get the following message:
"The selected file contains a definition of a building site that is already in use."
"What would you like to do?"
"Update the definition of the existing building site (cancel the import and use the selected file to update the definition of the existing building site.)" - THIS OPTION REPLACES THE FIRST BUILDING WITH THE NEW BUILDING I HAVE SELECTED
"Browse to another file (display the file browse dialog to select a different file.)"
My team and I have tried every we can think of including the following (see attached):
Renaming the files Moving the files to different folders Importing each building site into a new file and copy and pasting into the model (this works until someone tries to import a building site, which will inevitably happen and ruin this work around)Double-checking all related settings.
How to write an AUTOLisp program to label building dimensions. With Civil3d 2013 preventing me from labeling multiple lines at once, creating building labels to dimension complex building exteriors is much more complicated than it needs to be. Lisp Routine that Generates a MText or Dtext dimension centered on a line and offset to be clear of the line. the layer for this piece of text would always be "DIMS-BLDG" and the text style will always be "L50s."
the text doesn't have to be organized as it is in this example. the main focus is the layer being correct with the foot mark, precision set to xx.x and oriented to the line.
Like in Autocad is there a way to put building elements onto layers to turn off and on when needed?
View 1 Replies View Relatedhow to convert multiple selections to multiple layers or multiple files with one go?
View 6 Replies View RelatedHow to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I am modifying topography to include multiple building pads at varying levels and also including sloped pads. I am having a non-consistent problem at the common boundary of some pads. A small sliver of topography sometimes 'sticks through' the common boundary. The height it sticks through seems arbitary, sometimes to the height of the original topography when cutting and sometimes much higher. I have used the copy/paste aligned commands to ensure the boundaries are exactly common but this does not work.
I have read that some users cut the topography globally and then build up the various levels and ramps using floors and the variable floor thickness command. This seems a bit cumbersome and I imagine would cause problems when cutting sections etc.
Imagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies View RelatedI'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?
I have a series of pics (approx 80) that I'd like to load into Elements, with each photo going into a single layer. I google'd a series of old posts where somebody used a "script", but the links are no longer working and that trails is dead.
View 9 Replies View RelatedI found an old thread from 2011 about the same problem and the mod reported it to the devs, but as far as I know no solution has ever been offered.(maybe in cs6? we are still using cs5)For one or two layers it's no problem to do it manually, but with say 40 layers with corresponding linked layers we need a better solution.
View 4 Replies View RelatedI am trying to get a white layer with see through writing which reveals the background image underneath. (Almost like I have put a stencil over a photograph). I have discovered this is called a clipping mask.
However, I am having difficulty using a clipping mask over multiple text layers. It seems to only do it to one layer directly beneath. I do not want to merge the text layers as I want to mess about with the design a fair bit.
to select object on a single layer
Dim strLayer as string = "road"acTypValAr.SetValue(New TypedValue(DxfCode.LayerName, strLayer), 2)
how do you select all objects on multiple layers
Dim strLayer as string = "road,sidewalks"acTypValAr.SetValue(New TypedValue(DxfCode.LayerName, strLayer), 2)
the above does not work. how do you select all objects on multiple layers?
NEED TO RENAME LOTS OF EXISTING LAYERS ...
EX:
LAYER NAMED:
E-PANEL LP 1-3-10 CRT 01
RENAMED TO:
E-PANEL LP-01-03-10 CRT 01
"CRT" NUMBERS WILL VARY
Is it possible to select entities of multiple layers?
I've looked at... [URL] .....
...and tried the following code.
string[] layerNames = {"1", "2", "3"};TypedValue[] tdv = new TypedValue[(layerNames.Length * 3) + 2];int i = 0;tdv[i++] = new TypedValue((int)DxfCode.Operator, "<or");foreach (string ln in layerNames){ tdv[i] = new TypedValue((int)DxfCode.Operator, "<and"); tdv[i + 1] = new TypedValue((int)DxfCode.LayerName, ln); tdv[i + 2] = new TypedValue((int)DxfCode.Operator, "and>"); i += 3;}tdv[i - 2] = new TypedValue((int)DxfCode.Operator, "or>");SelectionFilter sf = new SelectionFilter(tdv);PromptSelectionResult psr = ed.SelectAll(sf);
This code gives me an error in the PromptSelectionResult.
What would cause the erro?
My file has over 100 layers and 20,000 containers that are in 3D. It worked fine when I drew them. After I closed the file, it always takes 5 to 10 min to open. I can't delete a layer (layer2) or rotate angle of view or any normal command such as purge and audit.., it always crashes.
I was wondering that if I did anything wrong casued this, and that whether my approach of drawing these is correct, performace wise.. and what would be the better way of doing this..because my drawing is now uesless I can't even rotate it in vp or do anything..
I'm using QSELECT to select all objects on a layer, sometimes I need to select objects from 5-7 layers.
Right now I use QSELECT, select 1 layer, click OK, open QSELECT again, select another layer and repeat. Is there a faster way to do this without scripts?
I'm sure some of you do site drawings, how do you measure a curve? Some restaurants or cafes have a rounded serving counter, how you measure the radius to plot into autocad?
Just wondering whether there is a way to add an object to multiple layers. For example, if I have 2 layers circles and geometries - I would like to add a circle to both these layers such that if I turned either of them on the circle would be visible.
Additionally, is it possible to Group multiple layers into a single layer, for example the above 2 layers circles and geometries and into a third or fourth layer.
Query regarding layer control with blocks and stuff.
Traditionally to represent a computer on a drawing we would place two blocks, one would be the computer symbol itself, and one would be a unique reference (that we could attribute extract) directly above it. These two blocks, the symbol and the reference, would go onto their own two individual layers in the final drawing so that we could control the visibility and the color of both the symbols and the references individually. The layers, for example, would be called:
Computer Symbols
Computer References
Both of these blocks would be drawn in BEDIT on Layer 0, such that they take the properties of the layer that they are eventually inserted on.
I'm looking to combine the two blocks into one, but would still like the individual layer control. Is there a way I can combine the two blocks while still maintaining this individual layer control? I'm thinking that I'd have to draw the symbols and references on the above layers as opposed to Layer 0 in BEDIT, and then my 'new block' will probably have to go on a new 'total' layer like:
Computers
Computer Symbols
Computer References
So then I'd insert my 'symbols+references' block onto the 'Computers' layer. I don't really like this idea too much because it seems like I'm over complicating things (highly likely!). I guess what I'm really after is a 'symbol+references' block that moves as a group, but I can control in my traditional two layer approach.
I am designing a fill volume. I have created my surfaces and feature line. My topos however are on two seperate layers as one is existing ground and the other is engineered ground. How can I get my grading to work using two layers in a grading group?
View 5 Replies View RelatedI made an autocad file. with many xref files. there are layers. and the layers are all the same, only the name for the layer its the name of the xref link . but how can i turn it off at once.
View 9 Replies View RelatedI'm working on a drawing and I need to take multiple layers that I have drawn (which make up one unit) and basically merge them together so that I can replicate and move them about and place them where they need to go in the larger unit that they live in.
I tried playing with grouping in the Layers Manager, but that doesn't seem to be doing anything for me. Not sure if I'm just doing something wrong, or if there is another way to go about this.
I'm attaching my CAD drawing so you can see what I'm up to. In this drawing, there are basically two groups of layers. Those that make up the Control Tower itself, and another group for what's called a Tajimi Rack. I need to have all the layers for the Tajimi Rack made as one so that I can move that object around without having to move the layers one at a time. (There is a lot more that needs to drawn into the Tajimi Rack, but once I know how to merge them all together, I'll be in a good position to carry forward.)
I also need to know how to then take that new Tajimi Rack layer and duplicate it (I'm looking to place about a dozen of the Tajimi Racks in the control tower.
FWIW, I'm a self taught CADer. By that I mean I have to use CAD in my job but it's always done in a 2D setting where I'm simply looking through roofs with other drawings laid under for rigging purposes. This drawing things in 3D concept is something I'm just making up as I go along. 5PTS Control Tower.dwg
I need to quickly obtain a count of all entities on a layer, or preferably multiple layers. In this instance all the entities will be hatches so that should make it a bit easier.
I'm aware I can use quickselect but if there was a routine that would select all hatch entities on screen (multiple layers) and provide a count per layer that would be much quicker.
Been trying to show multiple layers/coatings in my drawing for several hours now, and finally defeated,
I have a revolved part that's made of multiple layers -- aluminum, for example, with an anodized coating and then a paint on top. I need to make a detailed drawing to show how thick each layer is, and to that end, created the part profile, added an offset rotation for layer 1 and then another offset rotation for layer two. They're thus symmetric and in full contact, but separate, distinct layers. No problem.
Turning this into a precise drawing, however, is a bit harder, since all of the layers render into one monolithic revolution. I need to show those layers distinctly, like in the png file attached. Is that possible?
I have a few files with layouts that have multiple viewports where layers were frozen to get the desired display, the drawing was saved, yet everytime the drawing is re-opened those layers are on again. This is creating problems because I am batch plotting many drawings at once. The layers are not locked.
View 4 Replies View RelatedI have a user who crashed and all the layers were renamed with the prefix to:
9669-pbase|
He needs to strip out all the "9669-pbase|" prefixes in 1,000 layers. Is there a way to do this?
I need to know how to dimension to a theoretical sharp on bent flanges. In an .idw it wont snap to the sharp and when a schetch is created for one it does not dimension between them only one or the other.
View 2 Replies View RelatedIs autocad 2012 capable of dimensioning a solid object in model space horizontally vertically and diagonally say across the opposite corners of a cube, or along the hip of a roof? What am I missing here, I am using the full version of autocad for exactly this feature but am still unable.
View 4 Replies View RelatedWhich category in the Dimension drop down menu do I use to obtain the linear dimension for the length of an arc, a 1/2 circle, for example.
View 4 Replies View Related