I've had a custom RomanS.shx for the past 15 years that has additional symbols in it that are not in the standard one.
For example:
%%150 = Centerline
%%130 = Delta
%%133 = Property Line
%%201 - 210 = Roman Numerals, and more.
They work great in old style single line text, but they have never worked in MText. I just get a question mark, until last week. The centerline symbol showed up in a piece of text imported from an outside DWG, but I could not figure out how. I could not see what code was there, it totally stumped me, but it got me thinking. Is it possible?
How I can get these characters to show up properly in MText? And not the symbols that are in there via the U+ codes. They look so different than romans that I can not use them.
When using TEXT or DTEXT I can add centerline, 1/4, or 1/2 symbols while using the ROMANS font.
It would make sense to me that when I am using MTEXT, this should apply. However when I try to insert the symbols this is what happens: My text style stays the same, but the font gets changed to ISOCPEUR and symbols have a bold type appearance.
I'm trying to create a macro which will attach a custom sketched symbol with a leader to some specific parts in a view. By modifying some sample code I managed to create a macro which will attach the sketched symbol to the currently selected edge (see code below). However I would like to select the view and let the code cycle trough all the parts and check the filename or a custom iProperty. If the filename has a certain pattern or a specific custom iProperty exists it should add the sketched symbol. I don't really see how I should do this, I can get a reference to the selected view and as far as I can see I can use the referencedfiledescripter to open the assembly and cycle through the occurences. However I don't see how I can use this to add the sketched symbol to the occurence in the drawing view.
' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument ' Set a reference to the active sheet. Dim oActiveSheet As Sheet Set oActiveSheet = oDrawDoc.ActiveSheet ' Set a reference to the drawing curve segment. ' This assumes that a drwaing curve is selected. [Code] ......
I work all across the country with different architects and engineers on a contract basis. Typically I create a custom menu that reflects each clients colors, symbols, layering ect. But now I have just upgraded to Acad 2012 and don't know how to create a custom menu in 2012 for each client. Is it even possible? What I have found is the customize button but when I modify a command for a specific client it makes the same change for all clients, as all that I was doing was modifying a workspace, and only modifying the command. What I have done in the past is to take the Acad.mns and copy it and rename it client-name-Acad.mns and make the necessary changes that the clients standards required. Can I still do something like that?
We have just made the switch to Revit 2013 and the first order of business is creating a template. I, as is my entire office, is learning as we go. I have followed the No Experience Necessary Revit book which was fantastic.
Now, at the beginning of creating my template I am stuck.
I edited the elevation marker and saved a new copy into my standards / prototype folder on my server. I customized it to look just like our CAD elevation marker, great...
I have the family loaded in the template.
Now when someone clicks on the elevation marker in the ribbon how do I get it to load mine instead of the default Revit one? Otherwise, I know I am going to find inconsistencies on our drawings as staff goes to that button.
When working in a drawing, I don't see a selection for weld symbols in Annotate - Symbols. Are they not available in LT? Is there something I need to do to activate them?
I have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
I have numerous MText paragraphs that I need to combine into a single piece of MText. I want the paragraphs preserved in the final piece. I've found some routines that can combine pieces of MText but I don't know if they preserve the paragraphs.I have DotSoft Toolpac but it doesn't seem up to the task. C
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1 WIN 7 64 PRO HP Pavillion h8xt, i7 2600, 12 GB RADEON 6450, 1 GB
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014 Inventor 2014, Vault 2014 HP Workstation Z220 Intel Xeon 3.4GHz 16GB RAM Nvidia Quadro 4000 Windows 7 Professional (64bit)
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
I have been using AutoCAD 2006. Our company is switching to AutoCAD 2012 LT. I want to be able to add my custom toolbar buttons from the 2006 to the 2012 LT custom Ribbon Tabs & Panels. I have figured out how to make the custom ribbon, tab and panel. I just haven’t figured out what I need to do to get the old stuff to where I can add them to the panels.
I have custom 2006 buttons with and without flyouts.
When I drag a previous custom command into an existing custom tool bar and edit the custom command (then rename the command in the Name and Command Name) it also changes the previous custom command that I originally drug into the toolbar. What am I doing wrong?
I am trying to create custom Materials in Inventor 2013. I have been able to create the custom appearances I want use on the materials and store them in the Inventor Materials Library.
After creating the custom appearance, Ive created new materials. When I try to change to new material appearance from default to my custom appearance, upon hitting the 'apply' button I get an error message which reads, 'failed to updated style'.
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
A consultant (of our office roofing department) provided CAD drawings of roofs depicting various roof symbols to represent equipment, this survey was years ago so I had no hands in it. The office roof inspector is hoping I may be able to change all the symbols to be industry standard symbols as the consultant used their own. Originally I told the roofing department it would be easy as I would just write a lisp and a script to change all the symbols to the new blocks...or so I thought.
As soon as I opened one of the consultant's files, those symbols...were not blocks, they were all comprised of lines, circles and hatches. In my frustration, I contacted the consultant and wanted a clarification on this, they simply drew the lines in and copied and pasted the symbols over and over again.
I got 240 drawings to literally update overtime. Each drawing can have an average of 30 symbols. Is there a way for autocad to recognize certain line patterns or hatch patterns (actually only the solids were used) and then store the x,y co-ordinates?
Is there a way to update a symbol of one type, without the changes being applied to all symbols of that type in the drawing?
Example: If I have three Flag Note symbol's in my drawing from the same sketch symbol and the text reads 1, is there a way that I can change the text to read 2 in one of them without the other two flag notes updating as well?
IV 2012 Pro-Suite / VP 2011 Windows Vista Enterprise - 64 Bit Precision Workstation T7500 Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs) 12284 Mb Ram Dual Quadro FX 5800
I'm having issues with annotative symbols jumping around the page. As far as I can tell, it happens on certain symbols when I add a second(or more) annotative scale to that symbol. I can reset the symbols so that they're all aligned and sitting 'on top' of each other, but when I switch to different viewports/plot or save/open the drawing again they've reverted to the position they jump too.
In the past I thought it might be something to do with where the basepoint was within the block, but having changed that, I still had the problem.
Both the blocks I've had it happen with are reasonably simple (one's an 'Auto Air Valve' symbol with a mask behind the lines, the other is a custom 'Section line' symbol although that also has some properties to allow me to extend the section line) objects. With the section line symbol I mirror it to get the second half, which is the half it's having the problem on. I wouldn't expect mirroring an object would do it though.
The odd thing is, it's only happened in some drawings that I've done, and only with some symbols (which were all created at a similar time, so should have the same issues?), so I can't think of what it could be.
What are the steps I should do if I want to use Object Data, the Display Manager, and digitize RUS Imperial? How do I use the Display Manager so that symbols are reasonably visible at Zoom Extents? (FYI: Trying overhead design in AUD. Symbols are different in model-based design compared to regular AutoCAD.)
I've just started working for an architect and downloaded AutoCad LT 2013 today...is there some sort of menu where I can get basic door, window, etc. blocks? Or are these things I need to create myself?...I see the "tool palettes" box but it seems to have a random selection of stuff labeled "Imperial Samples" leading me to believe there might be other stuff elsewhere.
I work for an electrical company, so obviously there's plenty of symbols that are used on our drawings. Now, I want to create a legend of all the symbols we use, but I want to put them in a table. Is there any way of doing it, so that rows can be hidden but not lost from the table?
We are using Inventor 2012 professional, 2 seats. When we create a .dwg or .dwf file and dimension our parts the Diameter and Angle symbols print as the letter 'P".
The symbols show on the screen correctly, but do not print?
