I have somehow managed to place items from my 2D layout sketch onto multiple planes in the Z axis. Again, this was on accident. I have not clue how I managed to do this.
How can I remedy this? Is there a way to project one plane onto the other, and then delete the original to get all of the features back on the same plane? What keystrokes must I have hit to cause this to happen?
I am creating a part that consists of a series of intermediate Lofts. The various Loft termination profiles are sketched on a series of stacked planes, most of which are parallel to one another. I have a Work Axis (oriented at an angle off of true vertical) that penetrates all of these sketch planes, essentially forming a "central axis" for my part. Most, but not all, of my sketch planes are normal (perpendicular) to that axis.
I want to use my "central axis" as a reference point in each of my sketches, i.e., the point where the axis intersects the sketch plane. I am having a minor difficulty.
When I project my central axis into a sketch whose plane is normal (perpendicular) to the axis, Inventor displays a reference point where the axis penetrates the plane and I can dimension my sketch geometry relative to that point. Conversely, no such point is displayed when I project the axis into a sketch plane that is NOT normal to the axis.
Is this correct behavior? To have a dimension able point on my "non-normal" sketch planes, must I create explicit Work Points to mark the intersection between my Axis and such planes, and then project those points into the related sketches?
I was wondering if I can have two image planes in a viewport. I like to have an image in the background to use as a reference sometimes but I can't figure out a way to put more than one image at a time.
View 3 Replies View RelatedI accidentally changed the line weight halfway through my drawing, and many of the lines are printing fat! I know about displaying them on screen, that is not my issue. The fatter lines are not specific to any layers, so in the layer dialogue box all line weights are listed as default. How can I change the lightweights after the fact, without redrawing the whole thing. Also, any line that I add to the drawing is still fat. I am using 2012 Autocad.
View 5 Replies View RelatedI've scoured the cui but can't seem to find where to restore the "Basepoint" selection from the Block editor's "Parameters" tab.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I have somehow accidently hidden the close, minimize and expand circles in Photoshop CS6 on a mac and now every time I want to minimize photoshop I have to go into window > arrange > minimize instead of just clicking the circle.
I have tried the tab key, the 'F' key, view > screen mode and window > arrange and none of them have worked and I cant find anything online.
I accidently saved my .ai file as a pdf and then kept editing. The file still had all of the layers etc.
If I 'save as' again and choose an illustrator document, will any quality be lost?
In my New Years' organizing spree today, I decided to split my Lightroom catalog into two separate catalogs. I didn't see an efficient way of doing this, so what I did was copy my entire catalog into a new catalog, and then I deleted (from disk) the ones that didn't belong in the respective catalog. After I deleted a few "catalog A" photos from catalog B, I double-checked catalog A to make sure I wasn't totally deleting them. . .only to later find out that I was only looking at a thumbnail. So now ALL of my photos are deleted, and I can't figure out how to restore them.
I used Time Machine to restore yesterday's version of Lightroom 4 lrcat. I created a new catalog--trying to start fresh--tried to import the photos from LR 4 lrcat. I have thumbnails, but on each it says "the file named x is offline or missing."
I also have a LR 3 catalog which houses the bulk of my years of photos since I just upgraded to LR4 a month or so ago. I tried restoring that from Time Machine as well but was unsuccessful in getting anything more than a picture that says "the file named x is offline or missing."
Although I am hopeful because I do use Time Machine, I do have a foreboding feeling because at some point when I deleted over 1000 images, I got a message that said that this action could not be undone because I was doing it to 1000+ images.
I am using LR 4.3. Using OS X 10.8.2. I am using some RAW files, others from earlier years are JPGs.
I saved a file as PSD ,then delete all the layers and was doing another stuff on the sheet( the reason I did this is because I wanted the same page size and was lazy to enter the size:| )after I finished, I saved the file to another name. but, I found that the first file that i saved manually , is replaced by an autosave file on my work procedure on the second file. I know this happend because I was working with the sama names, but is there any way that I can restore my first file that I saved to what I manually saved?
View 3 Replies View RelatedI am currently testing Lightroom on my computer and found a lot of useful features.
1. Does Lightroom have a function against accidentally deleting of files or pictures?
2. What about synchronisation? Can I use Lightroom on two computers, I mean when I work on the one computer, will all changes be available and visible on the other computer?
3. Can I use one catalogue on two or more drives in my computer?
4. Does Lightroom have a back-up function?
5. Can Lightroom recognize faces of people so that the software finds all photos of the same person?
I am a Lightroom 4 user and I have accidentally deleted the catalog AND the backup folder. I am completely panicking -- is there a way to restore my catalog?
View 2 Replies View RelatedI accidentally closed the tab that showed all the media I imported and I can't find a way to bring it up.
View 2 Replies View RelatedI was preping some photos in camera raw and decided not to edit some of the images so i deleted them on the left side preview on camera raw... now they are gone completely and cannot find them anywhere. Not in the trash. I thought i remembered in the older version of adobe camera raw that if you deleted on there the image remained on the drive sorce?
View 5 Replies View RelatedI accidentally deleted the “Five Lights Up” Style. How can I restore it to the Style list in the program? “Five Lights Up” is still included in the Photoshop/Plug-ins/Filters/Lighting Style folder.
I have a backup of the C drive before deleting. Is there a file that can be replaced from the backup?
I try to setup Photoshop on my computer an error message pops up saying that an error has occured during the setup with a bunch of numbers. I don't know what to do and its really annoying because I need photoshop on my computer and it won't allow me to install it. Someone please help. Am I missing files that are needed to install it or what? Also does anyone know how to reinstall .dll files that were accidentally deleted.
View 6 Replies View Relatedis there a way to explode a sketched symbol??? what i would like to do is place a sketched symbol with text from a custom iproperty, once placed it loses the link to the custom iproperty and is just dumb text.
View 6 Replies View Related1) Is it possible to add a pull down menu in a prompted sketched symbol to select predetermined values instead of typing them ourselves? I would like for the symbol to behavior to be similar to a cad dynamic block.
2) I'm looking to know if we can add simple rules in prompted entries? What I wish to accomplish is to have a default value that fits our need 80% of the time and for exceptions we can write in a different value when prompted. I know we can edit text after inserting symbols but we are rushed quite often and manual editing can be forgotten.
I am having a small issue with getting the correct text from a sketched symbol in an IDW. I can populate the dialog box OK when i hard code the Sketched Symbol definition. The issue i have is the sketched symbol may have been inserted 3, 5 or more times and i need to extract the text from the last inserted definition. So by setting a simple counter i can count how many time the Sketched Symbol has been inserted and then by running the code below i can read the text.
Set oPESS = oPEDoc.ActiveSheet.SketchedSymbols.Item(oCount)
oSSPE1 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(1))
oSSPE2 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(2))
oSSPE3 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(3))
oSSPE4 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(4))
All fine so far but and here is the real issue if ther have been other sketched symbols inserted in to the IDW the code above doesn't work.
What i need is a single line to replace the first line in the above code that will allow me to define the sketched symbols name and then by using the .item(oCount) (as above)to say this one extract the text from that sketched symbol.
I have imported a sketched symbol of 3rd Angle Projection symbol, however, it changes the centrelines to normal lines when placed in the template. Is there away round this problem?
View 4 Replies View Related
Is there anyway to report a coordinate of a part in a sketched symbol.
I have a plan view and would like to be able to point to specific part and among other things, report its elevation.
While editing and updating my idw drawing, somehow a sketched symbol disappeared. I really don't care about that. But this sketched symbol had a hatch in it (a fill actually) and this fill seam to be painted on my drawing right now. I can't select it, so i can't delete it. The only way it vanishes, is when i delete the whole view, with all of the dimensioning etc. i put on it. Anyway got a clue how to delete this hatch without deleting my view?
View 1 Replies View RelatedAdding a leader by checking a box when inserting a sketched symbol. My problem is regarding the leader start point. Can we change the justification of the leader or text, so it does not finish centered on my text? I want the leader to connect outside the text box to correspond to our presentation standards.
View 5 Replies View RelatedI have a symbol that gets placed in a certian location on a sheet. If the sheet changes size i would like the symbol to relocate itself. Usually i could just find it, delete it and replace it but this one is different. It has 16 prompted entries that may have been populated by the user.
Easy option=Be able to move the symbol.
Difficult option=Load 16 prompted entries into the a dynamic array and replace save the symbol in the new location.
I did some reading on attributes, would adding an attribute to the sheet location allow the symbol to move with it.
Inventor 2010
I have created a sketched symbol for use in a drawing and inserted the symbol into my drawing. My user defined symbol appears in the symbols list but I cannot seem to delete it. How do I now delete this user defined sketch symbol from my drawing?
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have a lot of small parts to generate and I need to put them on A0 sheets. I have created customer borders (4 pane, 6 pane & so on), so that I can place multiple parts on one sheet.
I have several bits of information that is unique to each part, but must be indicated, so I have created sketched symbols that has model properties in. Effectively each pane on the sheet has it's own "mini title block" that displays the information unique to each part.
I also have assemblies, so therefore I need to display the BOM. I find that the BOM for the assembly "snaps" neatly into the corner of each pane, but I don't seem to be able to get the same effect with the sketched symbols. The positioning of the sketched symbols look "tatty" and once it has a leader attached (which I switch to not visible), the sketch symbol seems to snap to some sort of invisible grid.
Ultimately, I will be delivering the drawings in AutoCAD format so it will be possible to zoom up and see these mis-alignments very clearly. That makes things look very unprofessional.
Any way to position the sketched symbols neatly.
Windows 7 Pro (X64)
Intel(R) core (TM) i7-2600 CPU @ 3.40GHz
16.0 GB RAM
Nvidia Quadro 600
Autodesk Inventor 2013 Professional Ultimate Design Suite
I would like to use a multi-value custom iProperty 'item_finish' in the part or assembly model to drive an iLogic rule.
'item_finish' would be 1-24 from the list.
The part file would have an embedded spreadsheet with column A corresponding to the 'item_finish'.
The spreadsheet would have column B containg long text descriptions of the finish process.
The ilogic rule must take the 'item_finish' number, find the corresponding row and then return the B column cell text to a user parameter 'defined_finish'.
The 'defined_finish' parameter can be called in a sketched symbol to describe the finish.
It appears this is all possible, but I cannot find enough information describing the snipped code requiremnets to accomplish the goal.
I am currently working on creating new symbols. Now I want to keep the look of the symbol (see attached) but I want all the text to be automated as the text is currently "prompted entry".
Now when I go into the edit the text within the symbol sketch, I need the "view label properties" from the drop down menu but its not there! Is there a way that I can get the "view label properties" into the drop down menu??? What I am after is to attach this symbol to a view and the symbol will automatically show the name of the view and the scale.
OR........ If there is any way that I can get default view label to look like my symbol?
I am trying to create a sketched symbol on the fly that has custom properties in it. I am also creating the custom properties on the fly. I need to get the actual expression for the property into the sketched symbol not just a value. I need this so that I can export the drawing as an autocad .dwg that has attributes in it.
View 3 Replies View RelatedIs there a way to make a sketched symbol "stick" to a view? I'm sure there is, but I can't remember how. We're using IV R2011 @ SP2.
View 4 Replies View RelatedWhy is it that when I create a dimension across geometry the dimension shows true, yet if I create sketched geometry in the drawing view it does not?
What I need to do is create an arc of swing for a door. So I create a sketched arc and then want to dimension the arc radius of the door, yet the dimension shows not true. How do I make it true? And why can't I snap to model geometry in the drawing view?
I hatched some area in sketched symbol. Now need to delete it, somehow cant.
View 6 Replies View Related