I am working in Civil 2012, and i want to have a label to display a measurement in inches on a customizeable titleblock border. The border itself is a dynamic block.
I seem to have succesfully created a label in the label style composer, unfortunatley it doesn't want to work in paperspace? All my labels get sent into model space? It is safe to say the label works, it just doesn't want to stay in my Layout tab?
I am not having any luck getting intersectwith working in paperspace? I'm not trying to intersect with objects in model space, just all objects in paperspace.
View 2 Replies View RelatedI tried to copy some mtext from a different Paperspace and pasted into new drawing (on paperspace) but no text appear while all the layers are turned on. Below pic ask for specific inserting point, i just specified on the screen but won't work. I opened new blank autocad drawing and tried to paste on paper space now it works.
TEXT PSSPACE.JPG
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I am having problems Xref ing a drawing of my new title block to paperspace. The plan is to try and have it as the default title block whenever I select to layout a drawing
View 5 Replies View RelatedI want to put some blocks in a key (on a TitleBlock, in PaperSpace). I have imported my garden as an Xref - does the access to those blocks not come too? And if not, how do I import them - or do I have to open the Xref and copy each over individually?
View 3 Replies View RelatedFor those who are using paperspace and want to dimension your modelspace 3D part.
1. Create a new dimstyle called 3D Standards (copy from your already standard dimstyle), the only thing you are going to change is the text alignment, change it to align with dimension lines.
2. In modelspace use your 3 point UCS and select 3 points on part how dim. will lay. So, if you need to dim. top, then pick 3 points on top, ect...
3. Change the dimscale to reflect the same scale as the viewport.
4. When finished dimensioning your part, select (Changespace) and select all dimensions (if you want all your dimensions to be in paperspace.
A file created over a year ago (I believe with AutoCAD 2010) is needing to be updated. I have AutoCAD 2012 and when I open it there is no text in my Paper Space. However, if my manager is to open the same exact file with his AutoCAD 2012 he can clearly see all of the text is still in place. Is there a setting somewhere that I have missed that may be making the text not show up? All layers are on and visible.
View 5 Replies View RelatedI've got an Educational Version of AutoCAD Map 3D 2010...
I'm trying to plot a drawing and my icons have disappeared.
Did I press something inadvertantly, where have they gone?
I'm writing an essay with pics and so luckily I have a scren-grab to show you...
And what happened next...
I've worked on a command that automatically imports a dwg into paperspace and positions it. I've just realized that when imported vertically, the titleblock is on the wrong side of the layout. I've imported it to (10,10,0) and would like to import to those exact opposite co-ordinates to essentially flip it but i'm a bit unclear as to how. I know that I can use the commands Database.PextMax and Database.PextMin to determine the max and min points of the primary layout, but what co-ordinates are these, are they the top right corner and bottom right corner.
For what it's worth, here's my routine:
string dwgName = HostApplicationServices.Current.FindFile(comp, acadApp.DocumentManager.MdiActiveDocument.Database, FindFileHint.Default);
Database db1 = new Database(false, false);
db1.ReadDwgFile(dwgName, System.IO.FileShare.Read, true, "");
ObjectId BlkId;
BlkId = doc.Database.Insert(dwgName, db1, false);
BlockTable bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead, true);
[code]....
when it comes to viewports in paperspace in 2013, due to the nature of my work i have several layout drawings all drawn on top of each other and all with ther own txt and dims etc, which again is all on top of each other making it impossible to work in model space, for this reason i work in paperspace within a viewport but now i have upgraded to 2013 while i am in mid command e.g. dimension and zoom into first point then zoom back out and in again to second point, by this time i have been kicked out of the viewport and just in paperspace so cant complete the command, doesnt always happen?
View 9 Replies View RelatedWhilst dimensioning in paperspace I dont seem to be able to get the dimesions to sit above the drawing in model space. for example if I place a leader across the drawing to a specific point the leader sits under the drawing and is lost/hidden. how I set the dimensions to sit above the drawing.
View 1 Replies View RelatedWhen I make a layout with a part of my drawing in a viewport, I switch over to paperspace to draw dimension lines in it. Although the layout is displayed in another scale (e.g. 1:100) it puts the right dimensions at the drawing.
But now a problem appears:
With one of my drawings the layout does not put the right dimensions at the drawing in paperspace. I really don't know what went wrong. Strange dimensions appear, as if there must be a strange scale factor somewhere. (Dimlfac=1)
I am having difficulties with the scale of my drawing. In my model space, the units are set to decimal - millimeters. And then, when I set up a viewport in paper space even 1/128"=1'-0" is too small. I'm using a size 24"x36" paper. Everything is set to 1:1 and I drew 1:1 in model space. Previously, another person drew this drawing and it fit on an 8x11 sheet of paper at 1:10, but mine doesn't fit on 24x36.What did I do wrong?
View 9 Replies View RelatedWhen working in paperspace trying to setup for a plot Autodesk decides to "freeze" my screen locking some of the drawing on the screen only removable by reopening the drawing.
View 1 Replies View RelatedTrying to change the ltweight settings in paperspace but nothing is working!
View 9 Replies View RelatedWhen using dimensions in paperspace i get the paperspace distances. Not those of the object i've drawn in model space.
f.e.: if i draw a line of 100 mm in model, and my zoom e on it in a viewport of 420, I'll get the distance 420. Like the dimension is not interacting with the model, see? Thought it would have something to do with the snapping, but can't find the link.
Viewport. I have scaled the viewport to 1/16 in paperspace, but the drawing is to large and does not fit in the viewport I need to zoom in to make it fit.
View 4 Replies View RelatedWhen I plot from AutoCad to PDF I usually have around 8 A3 drawings in other words 8 A3 paperspace drawings. When I plot these I do each one separately, the process to print the whole lot to PDF in one hit.
View 3 Replies View RelatedBasically I am trying to plot a paperspace layout tab... I have 4 viewports... I have selected monochrome... And when I plot it on my HP plotter everything in the viewport plots in color but my titaleblock information is black and white...
I am running AutoCAD Mechanical 2011
Let me know
I have lost all my objects in paperspace . The layers for the objects are still there, my viewport is there and working just can't see the border.
this problem is keeping coming back. Working Autocad 2010 on windows xp.
Using R14 I am unable to print leaders in paperspace. I have created the leaders so they go from one view to the other. They show up fine in the drawing but will not print. How do I get them to show like they are in the paperspace when they print?
View 9 Replies View RelatedIn paper space I have a rectangular viewport showing a floorplan. I have placed another smaller viewport over the larger vp in order to show a scaled-up detail of the floorplan. However I can still see the image from the larger vp below ( as well as the smaller vp's contents ), Is it possible to lay one vp over another, blocking out the image from the vp below?
View 9 Replies View RelatedI made a new A4 layout, but wanted to change the format to A3. Then I usually have to resize the picture frame so it fits a A3 and not the too small A4. But this time the "resize" frame is gone and I don't know how to solve the problem?
View 1 Replies View RelatedWhen I try to dimension my drawing in paperspace the dimensions are coming back as inches instead of the many feet that the drawing actually is. My viewport scale is 1/4" to 1' and ive done many other drawings without ever running into this problem.
View 9 Replies View RelatedIn paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
We do a lot of labeling in paper space and have been encountering a problem with our dimension command mislabeling lengths and widths. Please see attached DWG. The road width should be 24' and its labeling it 880'. BUT measuring hoizontally it seemed to work fine. Really strange.
I am using the dimension command and snapping nearest and perpendicular. If I just click without using osnap it seems to work.
We tried using the DIM / DIMFLAC / V / and selectiong viewport
The funny thing is that I dont have this problem with every drawing. Just some seem to have this glitch.
Dim acDoc As Document Dim acCurDb As Database Dim acBlkTbl As BlockTable Dim acBlkTblRec As BlockTableRecord Dim acText As DBText = New DBText() acDoc = Application.DocumentManager.MdiActiveDocument acCurDb = acDoc.Database Using acLckDoc As DocumentLock = acDoc.LockDocument Using acTrans As Transaction =
[code].......
I'm trying to fill out a sheet stock list in paperspace. What is the trick to get the new text object located in the proper place? When I run the attached code, the text always is located at 0,0,0. Is there an offset I need to apply?
I have an xref...I can see the labels in model space but when I go to paperspace, I can not longer see them.
View 9 Replies View RelatedI'm trying to rewrite some old VBA code into VB.net (which I'm not even Novice level yet), and I'm stumped on what would be a fairly simple principle (in VBA)..
For Each BlockDef in ThisDrawing.blocks If Left(BlockDef.name, 12) = "*Paper_Space" then Select Case True Case BlockDef.Layout.Name Like "*Test*" blah blah End Select End IfNext
Essentially conditional manipulation of paperspace elements depending on the layout name.
The following fragment allows me to recurse through entities in paperspace, but I've no idea which layout tab..
Dim BlkPaperSpc As BlockTableRecord = ScanTrans.GetObject(BlkTab _(BlockTableRecord.PaperSpace), OpenMode.ForWrite)For Each AcObjId As ObjectId In BlkPaperSpc Dim PspaceObj As String = AcObjId.ObjectClass.NameNext
What I need to do is to be able to identify a type of object (a table), confirm it's location, delete it and replace it with another one, depending on which layout tab it's on.
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700