AutoCAD .NET :: How To Make Multi Palette
Mar 27, 2013
I have code like this: 'ensure single instance of this app...Friend Shared m_ps As Autodesk.AutoCAD.
Windows.PaletteSet = Nothing' Define command<CommandMethod("TestPalette")> _Public Sub DoIt()'check to see if paletteset is already createdIf m_ps Is Nothing Then'no so create itm_ps = New Autodesk.AutoCAD.Windows.PaletteSet("My First Palette")'create new instance of user controlDim myPalette As Container1 = New Container1()'add it to the palettesetm_ps.Add("My First Palette", myPalette)End If'turn it onm_ps.Visible = TrueEnd Sub
in this code has a only one palette ( tab ) but , ı want to make 4 or 5 palette . how can I do thiswith vb.net ?
View 2 Replies
ADVERTISEMENT
May 20, 2013
I am using autocad lt 2014 and have some multi leaders on a tool palette that work fine but if I hit enter or right click for enter the multi leader will use what ever leader is set from the multi leader style that is set on the multi leader style control, but only the leader will come in wrong the text will come in correct.
View 6 Replies
View Related
May 8, 2012
I have created a workstation to be used by my cad department, but not able to get it to work. How do I make a multi-user workstation?
View 7 Replies
View Related
Aug 23, 2013
How to make Multi Leader end line landing or turn 90 degree vertical? I just want to use the leader point to the part and no text at the end of the leader. I guess the only way i know how to do right now is to exploded the M-leader and draw a line vertical down which is not recall proper way . Some people like to use just Leader not Multi leader but i like to use M-leader so i can enter the text in difference line. (See Pic below)
1e.jpg
View 2 Replies
View Related
Oct 21, 2011
I am trying to make a custom palette for structural members. "Then, temporarily deactivate the link and change the dimension properties of the tool to 4 x 4 x 4 meters. Next, copy the tool back to the Content Browser. The Content Browser catalog is updated with the new tool properties. Finally, reactivate the link from the Content Browser tool to the AutoCAD Architecture palette."
View 5 Replies
View Related
May 17, 2011
I'd like to make a button for the toolbar or the tool palette that will print consistently every time I use it.
For an example, I want to click this button that has the parameters for ADOBE PDF, 11x17, Lanscape, a certain Plot style table, etc......
I want to make a button for each print setting I use.
HOW...HOW can this be done? my inquiring mind wants to know!!
Having this little button will just me me that much more proficient, and ever bit of time certainly counts when under pressure to get out some drawings.
View 9 Replies
View Related
Sep 21, 2012
We can make multi master pages for ODD and EVEN pages.
View 1 Replies
View Related
Nov 4, 2012
I'd like to know how to make the LR4 crop and others tools palette to not scroll on right panel, i.e. to make them behave just like in LR3 - the whole panel is scrolling up and down, but the tool palette itself is staying on the top and dont move. I know, that hitting the T letter make the palette to not scroll (something like 'always on top' command in other software), but this also hides the toolbar under the picture. Oh, and once more - to make it work you have to roll off the upper panel.
My question is - how to make the tools palette not scrollable, but without disappearing the toolbox under the picture?
View 11 Replies
View Related
Feb 26, 2012
Is there a way to make a custom palette using the eyedropper tool? I've made a palette from an object, but it has too many colors. I've also made individual color swatches with the dropper, but I can't select them when using the Mesh Tool. Is there a way to make a color palette with the eyedropper tool that will work with the Mesh Tool?
View 8 Replies
View Related
Feb 2, 2012
Is it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies
View Related
Apr 27, 2010
I need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies
View Related
Dec 7, 2012
I wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies
View Related
May 15, 2011
I know how to make rounded corners. But the background has color and shows the square corners of the palette.
View 6 Replies
View Related
Jul 17, 2013
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies
View Related
Mar 8, 2012
I've only ever used gimp sparingly and for simple stuff. I now need to set the palette of a 8-bit png to a specified palette, but I can't find any in gimp or online about how to load a palette. I need the palette to contain colors that may not be in the image if thats possible as these images are sprites of under 40 colors, but I need a full 256 color palette. Also is there any simple way to convert a string of numbers into a gimp palette? If not Ill probably just look at how they are saved and just write a simple script, but I thought i would ask.
View 5 Replies
View Related
Jul 29, 2012
You can organize a multi-threaded work with data through Inventor API? For example, there is a assembly and I need the first part of assembling a list of items to consider in a data set, the second part of the list - in the second data set, the third - the third and so on up to N, where N - depends on how many threads can run in the system . Whether these flows are processed and to receive data in parallel? Or go to the consistent implementation of this algorithm will first be processed by the first part, and only after it will start the second ...?
Autodesk
View 3 Replies
View Related
Mar 29, 2013
I have a multi-core machine. How can I tell Inventor to use as many cores as possible?
View 6 Replies
View Related
Apr 23, 2013
How do I make a leader, no text, no landing, grippers on both ends. Every time I go to grab the gripper on the non-arrow side of the leader it moves away from me . The line just moves away from the pointer at an ever increasing speed and distance).
View 9 Replies
View Related
Aug 11, 2011
I have a drawing file in AutoCADMap 3D 2011 consists of some administrative boundaries and city boundaries. Now I have roads of multi line style in the same drawing. When I completed the drawing I noticed there were missing intersections and I wanted all the roads to look something like the drawing shown below.
Please look into the word file thats how I wanted to do intersection in my drawing. Is it possible to do this action in one command or tool.
This is how my drawing looks like. This is how I want the drawing to be.
View 1 Replies
View Related
Dec 19, 2012
I am using AutoCAD LT 2009. I have AcrobatPro installed on my machine as well.
I seem to have lost my ability to publish a a bunch of dwg files and have one PDF file as the output. It used to work fine...I would hit publish, add all my dwgs (all model tabs), configure all page setups to be one of my Adobe PDF options (I have few configured, one for color, gray, B&W, etc), hit the publish button and then adobe would be prompt me for a file name, and then voila - I have one multi-page PDF of my drawing set.
Where it got lost and what happened, I don't know. As for trying to fix it, I have tried everything below, but nothing that gets me back to where I was:
1. Tried using the built-in "DWG to PDF." At best, this will automatically generate a PDF for each drawing without any input from me. I then used Adobe to combine all the drawings into one file. I could live with this, however, the resolution of the PDF's is not enough. I even tried changing the resolution setting to 1200dpi...stills comes out bad.
2. Using the "Adobe PDF." I get prompted by adobe for a filename for each dwg. This is very tedious. However, the output files look nice and much better resolution than #1.
3. There seem to be a lot of mention in hte forums to a system variable PUBLISHCOLLATE. This does not exist in my list of system variables (maybe because I am using LT). I tried setenv command to create the variable and toggle it from 0 to 1...this does not affect anything.
4. Within the Publish Dialogue - There is no mention of PDF anywhere. My only options for 'Publish to' are 'Plotter named in the setup' or 'DWF'. Within the Publish Options, nothing related to PDF...only options for DWF. I have tried changing these anyway, not affect.
5. Toying the pc3 - I tried changing some settings with PC3 file (Adobe PDF and DWG to PDF)...nothing fixed the problem. I tried setting collate from NONE to REGULAR, tried changing port to AUTOSPOOL, PLOT TO FILE, PLOT TO THE FOLLOWING PORT...nothing worked.
View 9 Replies
View Related
Aug 26, 2013
My question is about the criation of the mulilines using UTM and VBA.
Let's go! I have the next script:
Public Sub LinhaDuplaContinua()
Dim multiLineObj As AcadMLine
Dim Vertices(1 To 36) As Double
Vertices(1) = 547990.632012883
Vertices(2) = 9500776.33954744
[Code]..
This script add a new multi-line in the AUTOCAD.
How I configure that line in the VBA? I need create parallel lines with determinate offset and width.
I need create this type lines in determinate time:
Continuous Double Line:
______________________________
______________________________
Double Right Dashed Line
_______________________________
_ _ _ _ _ _ _ _ _ _ _ _ _
Double Left Dashed Line
_ _ _ _ _ _ _ _ _ _ _ _ _
_______________________________
Double Dashed Line
_ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _
How i configure that in the VBA?
View 2 Replies
View Related
Sep 30, 2013
how to multi snap in block.dwghow to multi snap in block.
View 1 Replies
View Related
Apr 8, 2011
Version: ACAD2009
Have a bunch of DWFs (because it's smart!), but company Netbooks assigned to Techs are Linux-based...Autodesk still won't support Linux w/DesignReview and company won't use FreeWheel (proprietary info, security, etc.).
SO, is there a FREE way to convert a DWF into a PDF, keeping the multi-sheets, and is there a way to batch convert? I'm a crybaby so I'd rather not have to go back through hundreds of DWGs to re-plot. (...although...I *do* get paid by the hour...!...nah...can't in good conscience not look for a smarter way!)
View 9 Replies
View Related
Nov 24, 2013
What the best way to draw multiple parallel pipes that cross a corridor. In my example I have a track with 4 pipes crossing the track corridor on slightly different alignments (from perpendicular to skewed). I have drawn the pipes on as individual pipes under the same network.
However I cannot get them all to display on the profile. I have tried "Draw Parts in Profile" but it seems to bring up only 1 pipe. managing multiple pipes.
View 3 Replies
View Related
Dec 21, 2011
I am using 2012 currently. I am trying to make 2 key ways in opposite sides of a short aluminum round tube or bushing. the keyways will start at the top edge of the tube, cut to the center of the tubes length, then go 90 degrees in either direction going with the curvature of the tube wall, then back towards the top edge, but not all the way back out.The keyway will be through all, on both sides.
It essentially is a twist lock for a shaft with two pins to be pushed in, turned 90 degrees and sprung back into a locked position. What autodesk intended its Inventor 2010 and 2012 users to use to put this feature into the parts drawing or model.
View 6 Replies
View Related
Jan 10, 2012
Our configuration management tool requires a DWG for our system assembly drawings. A single DWG with all the sheets layed out in a sheet space. Right now I do a "Save As" out of inventor and it creates X number of seperate DWG files and then I stitch them together in AutoCAD by taking each sheet and placing them into a single sheet space (copy paste). My work flow would be much faster if I could get Inventor to create a single sheet space with all the active or selected sheets as a single DWG output.
View 4 Replies
View Related
Jan 10, 2012
I am trying to create a form, so that my designers can pick their parameters when they first start a new part.
For this form I have created a multi-valued parameter for them to select from.
My issue is, why does Inventor not list fractions in the correct order.
What I would like to see:
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
What Inventor lists:
1"
1/2"
1/4"
11/16"
13/16"
15/16"
3/8"
3/16"
5/8"
5/16"
7/8"
7/16"
9/16"
Is there a way to get Inventor to list these parameters in order of value?
View 2 Replies
View Related
Oct 22, 2012
I am having a problem with trying to come up with a way to create an inventor entity that is like an an autocad multi-width polyline. We make some of our lines in our silk screen as multi-width polylines - see example fig 1. I can't figure out how to accomplish this type of line effect in inventor - see example fig 2. We are actively trying to move from MDT2009 to Inventor and i can recreate most everything except this multi-width polyline.-
View 2 Replies
View Related
Jun 6, 2012
when I go to edit a text in my drawing using dd edit. The text I want to edit is Italic T, but when I start typing it automatically changes to Txt. font. So every time when I'm done typing I have to highlight everything I typed and change the font manually. On an older computer I had I never had to do this.
View 0 Replies
View Related
Feb 20, 2013
I have a 3 part assembly . Holes have to be made though the 3 parts . The holes can be made and snet/projected/though all/though distance and this work fine. The holes are shown in each part and the participant command works fine
The holes are shown in a drawing file....all GOOD
BUT
The holes are NOT shown when each part is opened!
View 3 Replies
View Related
Jun 24, 2013
When I manually enter the attribute, it comes up with 3 different data entry options but when I look at the attribute in .NET it shows IsMTextAttribute = FALSE.
What is the best way to set the multiline block attribute?
View 3 Replies
View Related