I know how to read the BMP thumbnail (there are some code here: [URL], but in 2013, the BMP has been replaced by a PNG. The type seems to be 6 instead of 2 (BMP), but I don't know how the PNG is stored (I've not made further investigation).
View 1 RepliesWhen I click on File>Open The dialog box no longer has a thumnail preview. Only a small grey box hovering on the right that says "Initial View" with a check box. I have attached a snapshot of my Autocad File> open dialog box so you can see what I'm getting on my end.
If I browse for files in windows explorer and change view option to thumbnail I can see the thumbnails just fine.
I've tried everything but I cannot get back my File> Open thumbnail preview.
In Tools> Options I have the thumbnail preview settings all set to save thumbnail preview image. Nothing has changed that I know if for the thumbnail preview to go away.
It's really slowing me down not being able to have thumbnail preview in the file> open dialog box.
I have a problem with previewing of new files I made in INV2013. Old files are OK. I can not find the cause...I also found, that some new files are correct and other incorrect, all made in INV 2013.
There are two types of error:
1) when I pick the file I want to open, in left lower corner - thumbnail window- is displayed text:"preview not available"
2) when I pick the file I want to open, the left lower corner - thumbnail window- is black
In iProperties panel I have checked "Save preview picture"
There are four of us in our office who all installed Autodesk Product Design Suite Premium 2013. One of us cannot see thumbnail previews in the file open dialog box or in the preview area of Windows explorer. She's using Windows 7, 64-bit.
View 9 Replies View RelatedFATAL ERROR : Unhandled Access violation Reading 0xffffffff Exception at e38e0004h
Installed Autocad 2013 a while back worked smoothly until yesterday since when it does not open cannot create new files and at the same time cannot open any existing ones
I have a Lenovo Z570 i5 2nd generation processor, 8gb ram , 500gb hd, 2gb nvidia geforce with cuda integrated graphic card, genuine windows 7 home premium 64 bit
i have tried repairing the installation from control panel, and re-installing it again but to no use..Looked it up on the internet and downloaded the service pack and installed it but to no use again !!
I have drawings that are saved as ACad 2010 and need to work on them in ACad 2014. I am receiving error messages saying the drawing is damaged and requires recovery. Errors are being detected and some files I can eventually open but edits are missing. Others I am unable to open and I get a message "audit could not correct errors in database".
View 3 Replies View RelatedI would like to see the drawing preview for the drawing in windows explorer. Just as if I have AutoCAD open and can see the preview for the drawing but I want to see this in Windows Explorer instead, if this is possible or not? windows explorer to show the big preview on right side showing only dwg file icon.
View 1 Replies View Relatedis there a setting to have this option always checked?
View 1 Replies View Relatedso i've been getting this pop up window everytime i try to open autocad today. yesterday night i was using it fine.now whenever i try to open the program, it says "fatal error unhandled access violation reading b14c4b12h"..i sent an error report to autodesk and they suggested a patch. and after restarting my pc its still not working.
i have win8.1 with autocad2014.it pisses me off koz i have school assignments to do and it's not working
I'm setting up styles and trying to play spot-the-difference; I can't see any difference between these three settings.
View 9 Replies View RelatedI'm using Autocad 2013, when I open my existing files this appear and program shut down
“Fatal Error: Unhandled Access Violation Reading 0xc075ddf8 Exception at e6197bd9h”
Attached herewith is a screenshot
reading some variables into DWG file - how? C#.
View 3 Replies View RelatedI wants get thumbnail of dwg file. Then, set background color(black) of this thumbnail.
View 1 Replies View RelatedSome users are getting the following error when running Script Pro:
Error while reading log file for <drawing path>
I am running 2011 c3d on windows 7 with 15 GB of ram.
An error message I get is "reading triangles from file" and the program locks up to where you need to do a reset on the computer. I have an existing ground surface that is data shortcut into the file I am opening when I get this error. The existing ground surface is about 5 mg in size. I'm not sure if this is causing the error.
I recently installed AutoCAD 2013 onto my computer which has windows 7 64 bit operating system. After completing installation, I tried to open AutoCAD and immediately I recieved this error, "Fatal error: Unhandled Access violation Reading 0xffffffff Exception at 70cbe8e1h.
View 9 Replies View RelatedI checked almost everywhere but there is no error i get .. Fatal Error : Unhandled Access Violation Reading 0xffffffff Expection at faad0004h .. I removed all the files and installed again but did not work ..
View 7 Replies View RelatedI have continuously been receiving Fatal Error codes following with my AutoCAD to crash by just saving my drawing.
FATAL ERROR: Unhandled Access Violation Reading 0x53fefc14 Exception at ed091e2bh.
FATAL ERROR: Unhandled Access Violation Reading 0x9ffd3a31 Exception at f797dcf9h.
Also, i having Runtime Error. R6025 - Pure Virtual function call.
I have repaired, uninstalled and reinstalled AutoCAD. I use Windows 7 64 bit. Everything is up to date.
I need to save as thumbnails (like jpg or bmp or png file...?) in other directory in VBA. I seen lots of examples but in 32 bit with ThumbnailView companent.
I need to get this in Inventor VBA and 64 bit system and I do not want to install any other companent.
Using Inventor 2013 and Win 7 64 bit...
How can I read the content/ string in the *.dwg file through autolisp?
Suppose I have used any word multiple times in a sheet. How can I count it through lisp programme?
I am facing an issue while generating the thumbnail of the drawing file.
Thumbnail is generating fine for drawing file.
Once drawing file is saved using below statement,
Database.SaveAs(filePath,DwgVersion.Current);
Thumbnail generation method is returning null as given below.
byte bytCnt = br.ReadByte();
if (bytCnt <= 1) //Means bytCnt value is 1;
return null;
I have the following code which isnt quite working, it reads a text file which has a list of Names of images and their bottom left coordinates i.e. name x y etc. I want it to check for a name equal to that input then in this case alert the user it is found, eventually I want it to load the tile but for the moment where am I going wrong, also the lisp wont close the file and I dont know why.
(defun c:imi ()
(setq IM (getstring "
Input name of 2010 tile"))
(while (not (= "" IM))
(setq TILE (strcat "BM" IM))
[Code] ......
I am not able to save the changes that I make to the starting position of my scenes thumbnails when I use a Thumbnail Menu to create my DVD. I am using Video Studio X4 with Service Packs 1 and 2 installed running on Windows XP Home, SP 2 with all updates installed and DirectX 9.0. The scene changes work fine when I Preview them but they are not saved when I close the Create Disk sub-menu. When I return to the “Menu and Preview” section of the Create Disk sub-menu, the Main Menu scene change is present as is the Chapter 1 scene change but the other chapter scene changes are gone. What can I do to correct this?
View 1 Replies View RelatedFor the past three day I've been modeling a character for an animation im making, but now when ever i try to open the file in Maya, Maya stalls at reading file 99% and stops working.
View 1 Replies View Relatedbecause the specified color book cannot be found? The file is opening without any colors and as i am trying to set the file up to print, it is VITAL that i have colors.
View 1 Replies View RelatedI am not being able to open a .cdr file in Draw. Its about 1.16 gb, I know its big but I didnt realise it has become so big, it has 18 pages now. It was working fine till yesterday. but now when i am trying to open it a pop up comes showing error reading file. I am using x4 in a 32 bit windows 7 with 4 gb ram.I have tried opening in laptop with 64bit windows 7 4 gb ram, it opened till 80% adn then a different error came which said - invalid object. I need to retrieve the artwork, i have worked on it for more than 3 weeks. The back up file also shows the same.
View 7 Replies View RelatedI am trying to read JPEG files generated by Panorama Tools software into PS 7. Some are read with no problems and some files can not be opened by PS 7. In the later case the following error message is displayed: "Could not open file because of a problem parsing the JPEG data".
The problematic files are read and displayed with no problem by Windows pictures and fax viewer software.
I have a scriptUI generated palette which contains 26 icons linked to their respective scripts. When an icon is pressed, it invokes the required script via this:
searchPanel.children[0].onClick = function(){
searchOne.open("r");
var bt = new BridgeTalk;
[Code].....
My other scripts have "normal" functions that don't cause any problems, so I'm assuming it has something with BridgeTalk being loaded inside the palette function (since the code that's read in from the file is inserted at the location from where it's called).
I had my Mac crash on me a few days ago and since then I've been only able to work on my current project for ten minutes at a time before I get the above dialogue come up.
It's not just this file that suffers from this and there doesn't appear to be a pattern to which file is affected. The files that are mentioned in the dialogue are outputs from both FCP and from AE itself, they are always Quicktimes and they are compressed with the Animation codec, although I've used a number of other codecs and it doesn't seem to make any difference. If I quit and restart AE, I can continue working for a while on a composition with the same file that caused the dialogue to appear, until it happens again, often with a different file mentioned in the dialogue.
We have re-installed the CC suite after an uninstall and clean-up, but to no avail.
Do we need to reinstall the OS? Could it be a quicktime thing?
i have using photoshop CS but i cant see image prewiew in file browser as thumbnail.The image thumbnail previews that used to be displayed in the Windows XP Explorer window are now gone. All that's visible are ugly, green PSD icons.
View 6 Replies View Relatedon WinXp and i think Max 8, you used to be able to see a max file as a thumbnail in windows. This meant if you wanted to merge a character, for instance, you didn't have to click though 50 files whilst looking at the preview window, you just viewed the folder by thumbnail and quickly grabbed the right file.
After going to max 9 (again, not too sure on versions) and vista we lost that ability, I posted around at the time but found no solutions.
So, I'm on windows 7 64 bit now and Max 2011 and was curious if this feature was ever fixed or even addressed/dismissed formally by Autodesk?