Dimblk1 = oblique
Dimblk2 = Closed filled
I'm trying to do so:
rotatedDimension.Dimblk1 = ConvertToLayer.GetArrowObjectId("Oblique");
But it does not work.
It only works if I do this:
rotatedDimension.Dimblk = ConvertToLayer.GetArrowObjectId("Oblique");
But I will not change everything.
How I need to modify dimension style if I want to get like in my given picture?
View 9 Replies View RelatedI have a dimensioning problem. I have dimensions that I cannot modify as I normally do. I do not know what setting is stopping me but here is what it is doing. I add a dimension to a part. I then edit it to add 2X in front if it. It will then put it on top of the dimension. If I put it behind the text, it then goes beneath the dimension. There is no way to add text and it would actually appear on the same line as the dimension.
View 3 Replies View RelatedI found a strange behavior of AutoCAD. When I was modifying a drawing and adding dimension annotation, there suddenly come some small circles as highlighted in yellow in the screenshot.
cc.png
First, there is no way I can't select them.
Second, zooming doesn’t change their size.
What these small circles are? How to get rid of them?
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedIs it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View Relatedhow to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies View RelatedIs there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedIs there a way to make the linear dimension a diameter dimension?
View 9 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 Replies View Relatedis it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View RelatedI have a STP file of a seat that I just want to simply modify it's dimensions. Bring some aspects in closer, raise the back, and hollow out the middle. I can't seem to do anything and in searching online I only ended up with Inventor Fusion 2013 R1 that crashes each time, and Fusion 360 which has to be the worst user experience I have ever found in a piece of software.
(Side note I understand a little about solid models and surface models, but I just want something to work, otherwise inventor is a glorified model viewer.
I couldn't attach the file so here is the link to it. [URL]........
How do I interate through the vertices of a leader and update them.
I have tried
myObjRef.UpgradeOpen()
For i = 0 TomyObjRef.NumVertices - 1
Dim MyVertex AsNewGeometry.Point3d(myObjRef.VertexAt(i).X, _
myObjRef.VertexAt(i).Y, _
0.0)
myObjRef.SetVertexAt(i, MyVertex)
Next
I had expected properties like StartPoint LastVertex to be updated.
Working with LT2012 found that the 'Properties' drop down list can be slow to populate - filling up a line at a time.
View 4 Replies View Relatedfor a study that I have to do, I did run a company specialized a 3D scan of some engine parts. Files that have given me are .stl that I can not modify or edit with inventor ..how can I make these stl files like editable solids?
View 4 Replies View RelatedWe need to modify the 2D drawings of our terminal..The drawings are in DWG format and and 2D plot plans and isometrics,...which version of autocad would be suitable for the mentioned working above?I was considering Auto Cad LT.
View 5 Replies View RelatedI have simple 3 column 4 row table I copied from another drawing and am tying to revise the text in the cells and can't. Text is entered into the cell but is on top of the existing text from the copied table. It also appears as though I can't delete the existing text either. I have checked the cell locking option and the cell is "unlocked" I thought this had something to do with the issue but apparently not.
View 4 Replies View RelatedI have a block which provides me a lot of things:
1) dwg name & path
2) date stamp
3) latest author of changes
4)misc. title block information
I'm not sure how to modify this one. I'd like to delete the item #4 options. I'm not even sure if I can edit this as a block.
I create a file of pemnut drawing so that I can use it as library file and then copy and paste to other of my other drawings. I don't know what is going on of the file. After 2 hours I created the file, it cannot be edited/copied.
View 9 Replies View RelatedI'm working on a drawing that was converted into cad and it seems like every dimension has its own style. When I copy use the move comand or try to change the dimension the text changes from being above the dimension line to centered and the text gets closer together horizontally. When I compare a copied dimension to the original it has all the same properties including the text pos vert still being above text. The actual dimension style hasn't changed at all but what is showing up on screen is different.
Here a image showing three dimensions with the same properties, the top 2'-10" is what it should look like, the bottom is what it looks like when I copied it and the 1'-2" is when I make a new dimension.
I am trying to put a 1 degree draft on the face shaded in yellow in the direction I have shown....not sure how to accomplish this?
View 4 Replies View RelatedHow can I modify out of box font size and styles of callout tag such as, room name tags or sections indicators?
View 1 Replies View RelatedI want to catch drawing modify event, that means if user start to edit current document I want to give a message to user.
View 3 Replies View RelatedIt is possible to change a document style color with a VBA macro or why not with iLogic ?.
I regularly imports STEP and the parts have defined colors. Unfortunately for change must clear all colors of surfaces. By cons, if you edit the styles we see that for each color there is a style with the color name.
So basically if I change a color style, all parts using this style will change.
