for a study that I have to do, I did run a company specialized a 3D scan of some engine parts. Files that have given me are .stl that I can not modify or edit with inventor ..how can I make these stl files like editable solids?
View 4 Replies
I need to rename and replace occurences in an assembly, then modify the occurence name.I rename and replace only Farme generator components, which is tested by <condiftion>.What I want to do :
- Num = ABC
- Original filename = toto.ipt
- New filename = ABC_toto.ipt, and Occurence name = ABC_toto
The code :
fileDir contain the file path
docFName contain the original file name (for example, toto.ipt)
Num contain the prefix to add to the name and the occurence name (for example, ABC)
If <condition>Then
New_name = fileDir & Num & "_" & docFName
Call oFileNameOcc.SaveAs(New_name, True)
Call oOccurrence.Replace(New_name, False)
oOccurrence.name = Num & "_" & oOccurrence.name
End If
The problem is, the first time I use the macro, the prefix is added twice in the occurence name (the filename is ok) : I obtain ABC_ABC_toto. This happen only the first time, and only on an orrignal Frame Generator assembly.
If I use the macro again, with for example Num = 123, the result is : 123_ABC_ABC_toto.Where is the problem ?
I have recently installed Inventor Suite 2010 on a new computer and I am receiving this error on a majority of my files.
Cannot modify the library file W:T46DManufacturing Drawings8300673-.idw
Component W:T46DManufacturing Drawings8300673-.idw is not checked out to you. Edits are not allowed on this file.
I understand this has something to do with using Vault. However since I am the only one using Inventor and these files are not shared, I did not install Vault on the old computer or the new one.
All of a sudden I get this message when I try to change the materials of any part within my workspace folder. I looked at the project and everything looks fine. I can save the file but cannot change or add anything now.
View 5 Replies View RelatedI create a file of pemnut drawing so that I can use it as library file and then copy and paste to other of my other drawings. I don't know what is going on of the file. After 2 hours I created the file, it cannot be edited/copied.
View 9 Replies View RelatedIn the Select File dialog box, I can modify the column widths and I can change the column content. For example, I can delete the "date" column and add a "date modified" column. But, I haven't found a way to save the settings that I prefer to have each time the dialog box opens. How to save the settings as the default dialog box?
View 5 Replies View RelatedI am a new user (using Autocad 2006). My problem is I have been given a drawing file that I need to modify but it was drawn in inches, I have always worked in mm's. Can I convert the original drawing to mm's??
View 9 Replies View RelatedI have a STP file of a seat that I just want to simply modify it's dimensions. Bring some aspects in closer, raise the back, and hollow out the middle. I can't seem to do anything and in searching online I only ended up with Inventor Fusion 2013 R1 that crashes each time, and Fusion 360 which has to be the worst user experience I have ever found in a piece of software.
(Side note I understand a little about solid models and surface models, but I just want something to work, otherwise inventor is a glorified model viewer.
I couldn't attach the file so here is the link to it. [URL]........
I am trying to put a 1 degree draft on the face shaded in yellow in the direction I have shown....not sure how to accomplish this?
View 4 Replies View RelatedI have a dimensioning problem. I have dimensions that I cannot modify as I normally do. I do not know what setting is stopping me but here is what it is doing. I add a dimension to a part. I then edit it to add 2X in front if it. It will then put it on top of the dimension. If I put it behind the text, it then goes beneath the dimension. There is no way to add text and it would actually appear on the same line as the dimension.
View 3 Replies View RelatedIt is possible to change a document style color with a VBA macro or why not with iLogic ?.
I regularly imports STEP and the parts have defined colors. Unfortunately for change must clear all colors of surfaces. By cons, if you edit the styles we see that for each color there is a style with the color name.
So basically if I change a color style, all parts using this style will change.
If i press RMB on an item form the marking menu it enables to suppress or modify it, but, on 2 computers, the RMB on the item activates it, just like the LMB.
View 1 Replies View RelatedI want to insert from content center a screw and modify it, prolong it's thread and more.How can i do that?
In a part file i cannot insert parts from content center, should i make an assembly? and then?
I'm trying to modify the depth of extrusion feature "Extrusion1".
As you can see, it doesn't let me. It only allows the extrusion setting "new solid".
I try to modify on a drawing the 3d model, using iLogic (same thing as Inventor "Replace model reference" command).
View 3 Replies View RelatedI am fed up with constantly changing the colour, justification, font and font size of text in sketches in the part environment. The text style drop down box is greyed out in the part environment so i can't set up a style and just change it.
Where i need to go to change what the default-iso style defaults to? Any registry key change i can use to make the test style drop down box available in the part sketch environment?
Is it possible to modify a sketch symbol that has existing prompted text while keeping the existing prompted text? For example, I have a sketch symbol that is placed on every detail on the drawing. We could have 8 details on a drawing.
This sketch symbol uses prompted text to fill in the relevant information for each detail. Is there a way to change the sketch symbol globally and then copy the sketch symbol in to each drawing without losing the prompted text? Currently I have to modify the sketch symbol within each drawing. To keep the prompted text.
it is possible to change the Authority name in Project tab under iProperites? I do not want to add a custom field though. We are using the Authority as a quantity field to over ride the drawings quantity.
View 1 Replies View RelatedI have a question regarding to modify category in a user library. I have to publish a part into a special category in Inventor 2012. These category asks for an Parameter which doesn't exist in my part. Actually is an absolutely useless Parameter so i want to delete it from category. The category was created by an user but i don't know how to delete the parameter. Only if i create a new Category i can change the category-properties just till its created.
View 6 Replies View RelatedI am looking for a way to change the parameters of a part that is within an iAssembly. Basically we have tubing with flanges on the end and wish to have an easy way to model varying lengths. I essentially need to be able to have the upper level iAssembly control the flange spacing and cut the tube to length based on the users selection. Due to BOM setup these parts must be seperate .ipt in a larger .iam
View 2 Replies View RelatedI need to modify all the ipt in an assembly, but I don't kow how many ipt I have, and I don't know the name. Can I have with iLogic the list of all the ipt used in the assembly ? For example, to modify the Part Number in all the components.
The code should be like this :
For All component in Assembly
...
...
Next component
I would like to know how to automatically register the file with a partial modification is the name to prevent destroying the original file. Since i am working most of the time on one file at the time, i would like to be able to apply a script which provides the final touch and save the file in the same as well with a little modification in the name: Example:
IMG_4000 --> IMG_4000b
So it means that i do not go via the batch processor to change the name.
It seems that any picture saved in TIF format using Photoshop Elements 5.0 cannot later have the Summary section of its properties modified. I discovered this when trying to add comments to pictures after using Photoshop to modify them. Windows XP gives the following error message when you try to change anything in the Summary tab of the file's properties:
"Changes to Summary properties could not be saved; access has been denied.
The file may be marked read-only or may be in use by another application."
The file is not marked as read-only, and Photoshop is not open. Rebooting does not fix it. Even copying the file to another computer does not fix it. The error stays with the file. It should not be an issue with permissions, since I'm logged on as Administrator on both computers. It's not a problem with TIF files, since I can modify the Summary properties of TIF files that were created with other programs, for instance my scanner. And it doesn't happen with files saved by Photoshop in any format except TIF. Something Photoshop is doing when it saves a TIF file results in modification of the Summary properties being permanently disabled.
I'm scanning old family photos to digital format and use the lossless TIF format for the master copies, so using another format is not an option. But I want to be able to go back and add comments to the master copies as new facts about the people and places in the photos come to light. I can keep a separate text file for descriptions of the photos, of course, but that always runs the risk of the comments getting separated from the picture.
(Can't edit the element until 'A' resaves the element to central and relinquishes it and you Reload Latest.).this note come when i try to modify or erase any element in revit file and i want to know why does this proplem occur ? and how can i resolve this proplem becouse ineed this file.
View 1 Replies View RelatedI know this option makes all lines the same thickness when printing, but where can i modify this "global" thickness.
View 7 Replies View RelatedI'm a new 2009 Inventor user (use mostly Solidworks for other jobs) and how to make the model update after I modify a feature sketch (e.g. I only add one more circle/hole to a sketch used for a somple extrusion, but the extra hole doesn't appear on the model). Tried all update-related commands but no luck so far. If I delete the feature and recreate it again everything works fine, but I stuff up all other features and mates that use the reference geometry...
View 2 Replies View RelatedI have an extruded sketch pattern that I have tried to make modification to via the 'edit pattern' function. When making ajustments to the pattern and clicking ok Inventor is taking nigh on 2 hours to complete the function. Then I have to finish sketch which takes another hour or so. Obviously it should not be taking this amount of time. The part in question is a series of extruded holes, nothing excessivly complex, why this is taking so much time to complete ? I am using Inventor 2013 Pro 64 bit, 3.07 GHz,12GB RAM.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I'd like to make it so that a user may add a button for my addin by only having to modify an xml entry.
None of the values (name, descrip, tooltip) are null, and reading from the xml is working properly. Each internal name is unique. Why this code would result in an error? The error message is attached.
If there's a known way to dynamically add buttons(in a loop), I'd be happy to use an established method as well.
Element[] QueryArray = query.ToArray();foreach (XElement item in QueryArray){string name = item.Attribute("Name").Value;string descrip = item.Attribute("Description").Value;string tooltip = item.Attribute("Tooltip").Value;tempButton = null;tempButton = oControlDefinitions.AddButtonDefinition(name, name, CommandTypesEnum.kEditMaskCmdType, m_AddinClientID, descrip, tooltip, Type.Missing, Type.Missing);oStandardsLinks.CommandControls.AddButton(tempButton);}
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I'm using inventor 20013 in my computer. I can't modify the image of icons in parts and assemblies?
I know to change the icon who appears up of tool bar in part and assembly screen , but i don't know change the general icon.
When you create a new Frame Generator assembly, you have a dialog box with Frame name, Path to frame file, Skeleton name, path to skeleton file. Inventor propose default values. Is there a way to automatically modify these default values ? For example, instead Inventor propose "New Frame file name = Frame0001.iam", I want a custom calculated file name.
View 9 Replies View RelatedI'm using Revit 2012.
know of a way to modify both Contour Lines (Topo) and the actual building in the same file?
i.e. without linking the file "topo" to the file "building"?
