AutoCAD .NET :: Distributing DLL With VB Studio Express
Dec 6, 2011
I finally have my first and only .Net version of a former VBA function running and I want to make it available to other users, but security is getting in the way. Copying the project even to a different location on the same local hard drive results in a security violation, let alone copying it to a network directory. I am using Visual Studio Express 2008 and cannot find the ClickOnce nor any Publish function written up on MDSN - do those tools only apply to exe style projects?
I did read about a work around of adding an allow remote flag to the AutoCAD configuration file, but that appears to be a massive security hole as it could (I think?) allow *any* malicious dll file to run.
Is distributing / publishing a dll project impossible with Express?
Inventor Professional 2014 64 SP1
Windows 7 64 bit - SP1
Xeon E5-1620
16 GB Ram
Quadro 2000
View 6 Replies
ADVERTISEMENT
Aug 28, 2011
I'm looking for the complete instruction set prepare Visual Basic Studio 2010 Express to program Inventor 2012 Professional.
At the moment, all I've done is to install VB Studio Basic 2010. If I'm not mistaken, don't I have to "configure" VB 2010 Express so it can be used with Inventor 2012?
View 5 Replies
View Related
Mar 26, 2012
How to get the 'Shape to Block' command to work (under express tools).
It says select object, but no matter what object I select eg. circle, pline or line, it says invalid selection. I am running AutoCAD 2012. Are 'shape' objects somehow different from any other objects?
View 1 Replies
View Related
Aug 12, 2003
I am able to use the menuload command to load the express menu, but when I try to execute one of the express tools. AutoCAD say invalid command, there was something on the website that said to type express tools at the command prompt, but when I do that, too it says invalid command.
View 5 Replies
View Related
Jul 11, 2012
I installed express tools with ACADE abd ACAD, some of them don't work, example:
_.sysvdlg Unknown command "SYSVDLG". Press F1 for help.
other commands missing:
arctextx, txt2mtxt,mocoro,dimex,dimin,qlattach
View 4 Replies
View Related
Sep 19, 2012
I have problem with my Autocad 2011,It always showing a message "unable to load acetauto.isp/fasload failed"
View 1 Replies
View Related
Oct 21, 2011
I am using AutoCad Civil 3D 2012, with windows XP, and when I type "extrim" at the command line, I get this:
Command: extrim
"bad argument type: listp #<SUBR @2f9669b0 BONUS_ERROR>"
There are also a few other express tools that when picked from the ribbon menu, do not work either. Now, I have seen elsewhere on the web that in this case, you should make sure there are no search paths set to R14 Bonus tools (which mine aren't), or repair and update express tools from add/remove programs in the control panel. I did this, and the only thing that happened was the numbers after SUBR@ changed.
View 3 Replies
View Related
Jan 28, 2013
Infrastructure Modeler is a handy tool for creating nice 3D models for presentation. But how can we distribute these models for stake holders to review? Sure we can create nice video presentations but we want them to be able to nagivate the model freely. Is there any way to get the models into 3D PDF format?
The same issue arises with Civil 3D. Apparently it does not support output to 3D PDF. Do we have to purchase a driver for this?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 9 Replies
View Related
Dec 10, 2012
I want to know that whether Canal Design is possible in civil 3D or not.
If there is any software that deals in designing of Canals for distributing water to irrigated lands.
View 2 Replies
View Related
Jan 5, 2011
My application works with function it acet-ss-drag-moves of Express Tools. Can I distribute AutoCAD Express Tools with the program of Installation of my application?
This to guarantee that Express Tools will be with the user's AutoCAD. If this is possible what document should I use?
View 1 Replies
View Related
Jul 2, 2012
I'm a beginner with Illustrator and I've got a problem with distributing objects around a circle in Illustrator cs6. What I'm trying to do is to have these acrhed lines (as per the top three curves you can see below) go around a circle, surrounding it (don't know if i explain myself good...). I was using both blend tool and rotate tool and it doesnt work for me the way I want it. All the time its sort of upside down at the bottom of the cirle and totaly twisted on the left and right...
View 13 Replies
View Related
Nov 20, 2003
I have 5 text layers for the different sections (home, news, contact etc.) and I have them all aligned horizontally. I position the far left text layer where it needs to be, then the far right text layer where it needs to be, link all the text layers and hit 'Distribute Horizontal Centers' to have them fill out the space between evenly.
View 2 Replies
View Related
Mar 24, 2012
I tried to create a rendering utilizing the IES file from a light fixture manufacturer and I can't seem to get the photometric web to distribute along the full length of the bulb. It looks like the light is being distributed from a point in the middle of the light fixture although it is a 4' T8 fluorescent bulb. In the light family Light Source Definition, I set the Emit from shape to be a line and set the Light Distribution to be Photometric Web and set the Emit From Line Length parameter to be 4'. The distribution of the light looks correct, but just only from a point.
View 5 Replies
View Related
Mar 2, 2013
I remember using a tool/option to align few lines from longest to shortest.I can't remember where this optin is.
View 5 Replies
View Related
Feb 23, 2014
I've used the blend tool to create 10 circles going from smallest at the top > largest at the bottom. When I Align > Distribute evenly on the vertical axis - the circles aren't evenly spaced. I'm guessing ai is doing the math from the centerpoint? How can I get them distributed so that the space between each circle is the same. F- 10 px from the top of one circle to the bottom of the one above it.
View 11 Replies
View Related
Mar 10, 2011
I had express tools loaded, but now I have a problem. I try downloading Auto CAD True View, but did not get it to work, since then I have been getting unknown Command "txt2mtxt" now none of my commands work. I try auto cad repair from the install program and it still does not work.
View 1 Replies
View Related
Feb 27, 2013
I received a set of files from a client with .max extensions. Is it possible to open or import these into AutoCad? I would like to try this before going back to the client and asking for them in a different format.
View 9 Replies
View Related
Apr 4, 2013
Often I'll render a preview of my work in Studio and want to change the timelines of 30 or 40 different parts. Each part can have 5 or 10 snippets of timeline (the blue lines in "Animation Timeline"), so I end up holding down CTRL to select the timelines I want to delete (easier to start from scratch than sort through a mess of timelines) and I end up clicking through 200 or 300 blue lines to delete them.
Is there an easier way to clear timelines for parts? I don't want to clear all the timelines for a particular part, just up to a certain point. For example, in a 30 second video, I might want to change the speed of the parts at the 10 second mark, so I just delete everything from 0:10 to 0:30.
Attached is a picture of the blue timelines I'm talking about. Not sure what else to call them.
View 2 Replies
View Related
Feb 22, 2012
Look at the vifdeo file attached. I have not problem to create one component fade out (from 100% to 0%). But how to show the another component fade in (from 0% to 100%)? Studio does not allow fade from 0% to 100%.
View 4 Replies
View Related
Jul 2, 2013
i have installed the SDK for inventor 2014, but there is no add in template for Visual studio?
can i get one from anywhere?
View 3 Replies
View Related
Jul 26, 2012
I've been working in Inventor Studio (Inventor 2011) & every time I exit & return to the assembly environment I receive an error message (refer attached). Plus if I don't move the animation timeline back to the beginning prior to exiting, my model will display in its finished position but on the timeline be at the beginning when I go back into Studio.
View 1 Replies
View Related
Jul 6, 2010
I am having Visual Studio 2008 installed on my computer and AutoCAD 2008 as well. When i downloaded the ObjArx from AutoDesk and try to install ARX Wizards it says that you must have Visual Studio 2005 installed on the system.how to get the ARX wizards for Visual Studio 2008 ?
View 2 Replies
View Related
Feb 23, 2012
I collasped my animation window and I can't resize it to show my animation timeline. I can only resize the window left and right??? I have exited studio environment and re-enter and still can't resize window up and down.
Inventor 2012 Certified Professional
Software: Autodesk Inventor Professional 2012 64 Bit- Service Pack 1
Operating System:64 bit-Windows 7 Enterprise-SP1
Processor: Intel Core 2 Duo CPU P8700 @2.53GHz
RAM: 16 GB
View 2 Replies
View Related
Apr 10, 2013
I would like to animate and render a 30 second video of something similar to the attached assembly. I have been using Inventor Studio to apply animations to the components, render them as full frame AVI (800 MB files), and compress them with Sony Vegas Pro free trial (~120 MB).
The attached assembly is a simplified example and took me around three hours to model, constraints, animate, and render from scratch. Normally, the boxes are constantly starting and stopping and moving at different velocities. Defining distances and times is cumbersome especially since I need to be aware of the boxes' positions relative to each other so they do not appear to move at different speeds or overlap.
I think a solid modeling program might not be the best tool to animate loose components sitting on a conveyor belt. Inventor slows down and occasionally crashes when I get up to 40 or 50 boxes stopping and starting and moving at different velocities. I am inclined to think that 10 or 15 animated conveyor belts moving boxes with a coefficient of friction would be near impossible on my machine (modeling the belts similar to a track on a tank or a chain and sprocket, also constantly starting and stopping and moving at different velocities).
I haven't played with Showcase, 3ds Max Design, or Navisworks Simulate. Would it be worthwhile to try any of these to animate and generate videos?
View 2 Replies
View Related
Aug 3, 2010
I'm using 2011 pro. When I try to animate a positional rep in inventor studio, it complains that I don't have excel installed. (see attached image) although I do have it installed. I've put the hotfix on for excel, with no effect. I've repaired inventor and repaired excel no fix though.
View 9 Replies
View Related
Oct 21, 2012
Any way to increase DPI for image output besides rendering in Studio?
When I save as image file I get option for size, of course, but no option for DPI.
View 6 Replies
View Related
Jul 25, 2006
I have a problem with Inventor 11 Studio. The reflection on the ground made by "XZ Reflective Gp" works in a way that when rendered, it shows a partial or cut reflection of my assembly, see attached .jpg file. I have not found yet where this "reflection depth" is regulated.
View 9 Replies
View Related
Sep 20, 2011
I have two gears. In the assembly I have them setup to mesh correctly. I can drive the constraint on the pinion and the gear will follow it (some what). I wanted a better video of it, so I went into Studio. Now when I drive the constaint like before on the pinion, the gear goes crazy.
[URL]
There is a rotational translation constraint set between the pair (= to inverse of gear ratio) that works in the iam, but it is like Studion ignores it. How can I animate this to show the gear mesh?
View 1 Replies
View Related
Aug 10, 2012
I have the express tools loaded and it shows in Autocad. But when I try to use a command it says unknown command. I have tried unloading and loading the express tools many times but the commands in express tools aren't working.
View 9 Replies
View Related
May 22, 2011
I am using Autocad 2009 and it seems that whatever command under express tool just not working. e.g it says: [Unknown command "OVERKILL". Press F1 for help.] when when i typed in "overkill" or even using the express drop down menu.
View 2 Replies
View Related
Dec 28, 2011
I have a robot that I am animating in Dynamic Simulation. I have Imposed motion on each of the relevant joints, and can run the simulation nicely.
The problem occurs when I "Publish to Studio" I loose all functionality and the robot stays still in the Studio environment.
View 3 Replies
View Related