AutoCAD .NET :: Define And Assign Variables In Single Line
Aug 3, 2012
Why do most of the VB.Net examples, define and assign a variable in a single line as it is being used in the program.
In VBA I found it easier to read the code with the variables defined at the top of the function or subroutine.
What do most of you do when defining variables ?
I find the VB.net lines below more difficult to read ..............
For Each acSSObj As SelectedObject In acSSet
Dim acEnt As Entity = acTrans.GetObject(acSSObj.ObjectId,OpenMode.ForWrite)
View 3 Replies
ADVERTISEMENT
Aug 7, 2012
If it is possible to assign multiple attributes to a single line text within a block, and be prompted for them upon insertion.
View 3 Replies
View Related
Oct 31, 2013
I am unsure why my Lisp does not work.
(DEFUN C:Clear_values (/ GLBLS) (SETQGLBLS '(*DATEDRAWN* *DRAFTNAME* *JOBNUMBER* *OWNERNAME**JOBCOE* *PERMITREVDATE* *PERMITCONTACT* *HOMEBUILDER**SUBDIVISION* *ADDRESS**CITY* *STATE* *ZIP* *LOT#**PARCEL#* *NSCOORD* *EWCOORD* *STANDARDDETAIL#**SUPERNAME* *SALESMAN**GATECODE* *HOMEPHONE* *WORKPHONE* *ALTPHONE1**ALTPHONE2* *EMAIL1* *EMAIL2* *ACCESS**EXCAVATIONTYP* *EXCATDEMO1**EXCATDEMO2* *SKIMRUN* *AWLRUN*
[code]....
I've tried several options such as (mapcar 'set GLBLS "%%") but nothing happens, and with the above code nothing happens; the code only returns nil.
View 8 Replies
View Related
Apr 9, 2012
Looking for Lisp command to show (read/assign variables) to normal or custom properties in an object?
View 7 Replies
View Related
Aug 2, 2013
Can Dynamic Simulation drive multiple variables with a single parameter? In the following example, the variables len_A and len_B are driven by size. The parameter "size" varies from .8 to 1.2 (currently I have size parameters in a Multi-Value List).
Is there a way Dynamic Simulation can drive the "size" parameter to animate the assembly? I plan to use Dynamic Simulation's Output Grapher to Plot a Trace of the triangle's apex as A and B vary in length. The example assembly is attached.
View 4 Replies
View Related
Oct 18, 2013
I have a few dozen variables that I am trying to store for use at the command line. I can only append to input area with the actual quickcalc open, how i can reinitialize the global variable list?
View 9 Replies
View Related
Aug 14, 2012
Writing a routine that stores a file name as a string in variable FILE.I check the variable and it returns a nice quoted string: "filename-123.dwg"
I would like AutoCAD to open the file w/out user input.With FILEDIA set to 0, I've tried passing the variable to the command line:
(command "open" FILE)
or in a script as:
open
(FILE)
...
or,
open
!FILE
...
I get the same error. The string dumps to the command line and I get 'Unknown command "DWG" .'
View 9 Replies
View Related
Jan 22, 2010
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
View 9 Replies
View Related
Mar 20, 2008
We have an employee in our office that is kind of old school in some ways. That person has a habit of exploding everything possible in a drawing. Most of us create notations using mtext so it's easy to edit and manipulate. Is there a way to convert the single line text back to multiline after it's exploded?
View 9 Replies
View Related
Oct 17, 2012
How can i assign conduit length tag on line....? know that i have multiple lines and i wanna get total length of multiple line so how can i do this....?
View 5 Replies
View Related
Sep 13, 2013
Given a feature line/polyline(FL/PL) and a series of points directly on the FL/PL, how can you assign the elevations of the points to the vertices of the FL/PL?
Without using a surface?
View 9 Replies
View Related
Aug 16, 2012
When I draw the detail line (DL), Is there a way to switch from straight line to spline line quickly? It's difficult to keep moving the mouse to the toolbar to change the line type.
I tried to assign a keyboard shortcut to the spline line but it didn't seem to work.
View 1 Replies
View Related
Apr 28, 2011
I would like to mark the outline of an object with a dotted line/ the outline should be a dotted line to show that this object can be cut out. But I see only where to choose the thickness of a line.
View 1 Replies
View Related
Oct 7, 2011
I need to convert single-line text into multi-line text (AutoCAD LT 2009). Will this version allow you to do so?
View 2 Replies
View Related
Dec 14, 2011
I know that there was a command that would convert single line text to multi-line text but I can not find it. It use to be tt2mt or something like that.
I can not find this command in the help either. Did they get rid of this command like zoom center?
how to take multiple single line text and add them together into one multi-line text?
View 5 Replies
View Related
Oct 31, 2012
How can I add single line text to my CAD drawing? I use DTEXT command, but there is no option to enter text height. CAD only asks me the rotation angle of text and then blinking cursor appears. If I type something, text gets so small it's almost invisible. Only option for me now is to scale but it takes too much time and too many clicks to get my text to wanted size. Why AutoCAD doesn't ask me for the height?
View 9 Replies
View Related
Feb 12, 2013
except for the quantity of the line . the case is I was taught to make a title block tempelate. For each single item, like text"STUDENTS NAME " or "PART NMAE" , and inluding the attributes, I was instructed to use single line text instead of mutliple line. I was told that single line won't change. What does it mean it won't change?
I feel that single line is more precisely controlled ,while the multiple line text is more ofen used in puting the notes in a drawing. But in what case use what I am confuesd. Especailly when make the tible block, It seems to use the single line text is the unique way to make each feature in its status.
View 2 Replies
View Related
Sep 27, 2013
I am using single line text. I need to insert a "left" arrow/ "right" arrow. when I use U+2190 it gives me a question mark. If I use the same code in Multi text it works fine, however It must be single line text. Is there a way to do this?? Maybe a %% value????
View 8 Replies
View Related
Oct 10, 2011
I want to draw 3D pipe line using sweep command. For this first i have to make a path in poly line, that i couldn't yet.
Check attached file green and red line and make a single poly line instead of 2 red or green line.
View 1 Replies
View Related
Jan 8, 2014
I am working on a project where several holes in a sheet metal part will need to be cut as "knockouts". In previous years, either an engineer or the laser cutter programmer would set up the machine to partially cut a circle, but leave a gap to hold the knockout in place (basically a 340 degree arc).
Now that we are using Inventor, is there a way that we can create these features so that they show up in a dwg as a single line? It must be a single line; some of the holes are very small and if the laser makes more than one pass it could affect the integrity of the feature.
The closest I have gotten to accomplishing this is a surface extrusion on the folded part. When I send it to an .idw file, the line appears in the folded model, but I need it to appear in the flat pattern.
View 9 Replies
View Related
Nov 12, 2013
I am experiencing this issue every now and then and I don't know why or how it happens. No modifications to the BlockDefinitions or any BlockReferences are made and for some magic all multiline attributes in the drawing file revert to single line. After that happens the only way I know to fix them is to go through all definitions in the Block Attribute Manager and make every attribute multiline again. This is very annoying because I don't know how it happens so it can be prevented and because it takes time to fix them again. AutoCAD 2012 (Mechanical) on Windows 7 32 and 64 bits.
View 3 Replies
View Related
Feb 4, 2012
Is there any to get the single line display into the medium or medium low rep by object? I see the only place to get it is to use the High Detail rep by object. Normally in a high detail would you not want a double line for doors? and use a single line for concept in the medium low? I would like to see the ability to have the single door in all display reps by object
View 4 Replies
View Related
Feb 7, 2012
I just switched over from 2005 to 2012. In 2005 I used Express Tools to change several lines of text to one mtext object. I can't find it in 2012. I didn't realize how much I used it until I lost it.
how to select several lines of text and convert it to one mtext object?
View 3 Replies
View Related
Jul 9, 2010
When using RomanS, how do you stack fractions in single line text? AutoCad will do it automatically in multiline text but I am having trouble in single line text.
View 5 Replies
View Related
Oct 10, 2012
why I would get gaps in my grading from a single feature line? The feature line is at the same elevation all the way around and I am trying to grade to my existing surface at a 1:1 slope. No matter what I do it continues to leave out portions of the grading. I have attached a 3d image showing what's going on.
View 1 Replies
View Related
Oct 5, 2012
Is there a way to draw a single line offset to the geometry that I select? I am trying to use multi line by modifying a style but it will not allow for one line offset at 4".
View 2 Replies
View Related
Jan 13, 2012
Till now i was working with the various mechanical design software but now my project requires to design electrical distribution boards.I am not quite sure about reading the electrical schematics and how it works,so is there any literature available for the same or else
View 1 Replies
View Related
Aug 15, 2013
I have a Storm pipe network for a subdivision. All of the pipe are on the same layer, using the pipe style. For some reason, only 1 of 68 pipes will display through my viewports. All of the layers within the pipe style are thawed in my viewports, as well as the layer the pipes themselves are on.
Further, when I go back to an archived file from a few days ago, all the pipes are also on the same layers and styles, and all pipes display as they should through all viewports. There seems to be no rhyme or reason for this. I am not sure what could have changed as I didn't knowing adjust anything with the pipe networks since archiving a few days ago
View 5 Replies
View Related
May 21, 2004
I am running photoshop CS on my laptop which is a Compaq presario 1503 AP.
I have had this problem since I used Photoshop 7 and now Photoshop CS. When I want to go to a new paragraph or the next line using the enter key, it just doesnt work.
When I hit enter, the text just exits the text entry/edit mode.
View 1 Replies
View Related
May 31, 2007
I remember seeing an article or web cast on how to create a style to display a single line for a manhole. It may have been about using the parts create tool. But for the life of me, I can’t remember where I saw it.
Also I had created a style in C3D2007 to display the pipes in profile as a single line. This was done by drawing the flow arrow in a non printable colour over the top of the pipe.In C3D2008 this is no longer possible. So now what?
View 5 Replies
View Related
Mar 4, 2012
I have been outputting surfaces from Civil 3D 2012 using the LandXML export function. Some of the XML files that are output the data is on a single line and some of the outputs are on multiple lines.
Not a major issue as they both import back into C3D ok but within my office we edit the XML file slightly inorder to get it into another software package and require the multi line format.
The only difference I can see is the size of the data used to create the surface! All drawings have the same LandXML export settings..All surfaces have been created using a combination of point groups, breaklines etc..
View 7 Replies
View Related
