AutoCAD Map 3D :: Querying Multiple SDF Files At Once?
Apr 11, 2011
I have two SDF files, one is a fiber layer (ie Lines representing where fiber optic cable is located). The second SDF file is the vendor layer (ie Buffer area that represent the right-of-way ownership of the fiber/ie railroad or public). I want to use the second SDF file to query the first SDF file. For example I want to use the vendor layer to select all fiber that is on railroad right-of-way. I have no problem quering single SDF files, but I figure in AutoCAD there has to be a way to accomplish this task.
View 8 Replies
ADVERTISEMENT
Mar 5, 2012
I have a drawing with a bunch of polylines with object data attached. The polylines represent roads, and among the object data is a road number. A typical road number might be "2000" and a road without a number assigned yet would be "0"
I am trying to run a query that pull out just the objects where the road number field is 0. If I try to query based on object data where the field = 0, I get returned all of the polylines whether the field is 0 or not. If I query with "2000", I get returned just the single road with that number as expected.
I've tried several different ways to make this work and I'm not sure what is wrong. I have tried with the number as integers, and doing field = 0, field <= 0, field < 1 and that didn't work, so then I converted it over to a character field and have tried field = 0 and field = "0" - nothing seems to work. Is there something with the field being zero that is causing issues and is there a way to make this work?
View 2 Replies
View Related
Nov 16, 2013
As far as I know, before GIMP 2.8.6, it didn't querying new plugins on every launch. It only did so when there were new plugins installed. When 2.8.6 came about, GIMP would query all plugins on every launch. With 2.8.8 it seems to only do this with user installed plugins. I assume this a bug but I'm not entirely sure as I didn't really pay attention to the startup screen prior to 2.8.6.
OS: Windows XP Pro SP3GIMP: 2.8.8
View 4 Replies
View Related
Jun 4, 2012
I am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies
View Related
Jan 31, 2013
I'm trying to find a way to plot multiple (over a thousand) DWG files to PDF without doing each one manually. I've played around a little bit but without any luck. I'm using AutoCAD 2002 LT. Is there any way to do this?
I've also got little to no experience with the more complex settings and abilities of autocad so do so in laymans terms.
2002 lt has no general publish (only publish to web) option and how sheet sets work.
View 4 Replies
View Related
May 26, 2013
how to convert multiple selections to multiple layers or multiple files with one go?
View 6 Replies
View Related
Feb 18, 2013
I have a large batch of OS data covering the housing stock of a housing association which I'd like to break down into 81seperate local area maps. There are 162 of these files and each of the local area maps covers 3 or so of the shp files. I'd like to style each map the same.
So I go into the style manager for one of the loaded shape files and create a simple style.
rule 1 DESCGRP = "Road" Style: none
rule 2 Default = thin black polygon.
I'd like some way fo doing this automatically or simply. Because doing it 162 times with all the shp files loaded is majorly time consuming and at soem point I'd like to be able to use more complex styles. Is there any easy way of doing this?
I also have all the shp files as gz files if that would make life easier and as lines rather than polygons.
View 2 Replies
View Related
Apr 15, 2013
I have a client that needs me to deliver my drawings in PDF format as multiple files with a specific naming convention. What I am doing is publishing to multiple files then renaming each file individually which is time consuming and prone to error.
I was hoping to come up with a way to automate the process.
Here's what I have: Each layout contains a title block block, lets call it "tblock". Within this block there are attributes for drawing title, sheet number etc, lets call these attributes "dt", "sn" respectively. Each layout also contains an Xref which contains a block which has attributes for revision data such as date, revision, issue description etc Lets call the xref "XA1", the block "Xtblock" and the attribute I need "Xrev". In visual basic it might look something like XA1.Xtblock.Xrev
Here's what I need: export each layout as {sn} {dt} Rev {Xrev}.pdf
Now I have used VB to automate Excel tasks and create Database applications so I would describe myself as "handy", just not used VB within Autocad before. I have also not used LISP before either so I'm a bit of a layman in that respect.
View 0 Replies
View Related
Nov 21, 2013
I have an autocad file with multiple 3d solid objects in it. The 3d objects are organised by different layers with particular layer names.
Requirement: Can i create multiple autocad files that have file names derived from layer names of the original autocad file. Also, the 3d solid gets copied into the newly made files respectively according to the layer.
View 3 Replies
View Related
Jun 28, 2012
I have 100 .dwg files that I need to convert to .pdf file type.For obvious reasons, I do not want to do this one by one.Is there a way to do this, using only AutoCAD 2010?
Simply saying to 'batch plot', use 'publish' or 'change a setting' does not work. I would like to know, step by step, exactly how to do it. If there is not a way to do this, or the way to do it is extremely complex, any Autodesk program that does it or a free program.
View 8 Replies
View Related
Oct 21, 2008
I have a requirement to extract attributes from multiple AutoCAD files (500+) and export it to a text file or multiple text files. The purpose of the extraction is to find the total count for each of these attributes for BOQ and procurement purposes. The extracted data (in text or CSV format) will be loaded into another application. The tool to do the bulk extraction should be a command line tool to be called from the application that will load the data.
View 5 Replies
View Related
Nov 8, 2013
Is there a way to convert DWG to DXF files in very large quantities? (for example, by submitting a list of multiple files)
I work on autodesk 2012 suit (Autocad, Mechanical, Inventor, Designer).
View 4 Replies
View Related
Jun 21, 2013
I need to convert some of my ipt files to stp (around 130 files). Is there any way to do it all at once?
View 1 Replies
View Related
Aug 7, 2013
How practical is it to create and manage surfaces across multiple DWG files? One of the reasons I'm asking is some of our users are insisting their work can only done in a single file, resulting in massive DWG files and naturally, Civil3D slows to a crawl. I'll admit I'm not a full time Civil3D user or specialist - thats not my job. I'm reasonably certain it can be done from the most basic of research (which apparently nobody else wants to do...), but am Uncertain what the potential pitfalls are.
They complain of slowness and are requesting better computers from IT (I've talked them down to more RAM). I'm trying to forestall a potentially nasty political situation spiraling out of control: they get better computers, others will want them as well and either get them only because of connections, or won't get them and are resentful for the perceived lack of importance. We don't need people doing 2D schematic drawings on gaming rigs.
View 9 Replies
View Related
Feb 16, 2012
Currently I have to open dwg file each time I need to change the stall number or name. I use Fields so I only need to edit 1 field per file.
This becomes an issue as I have excel files linked, and I have to re-link them all after changing the stall numbers.
Multiply this by 20-30+++ files, and I have a big headache.
Is there an easier way to edit the Fields for ALL files and to update the links to renamed excel files?
View 1 Replies
View Related
Mar 15, 2012
I have a builder client who sends house plans in dwg. Recently, I have been receiving a folder full of dwg files for every room, options, etc.. When I try to open, say, the first floor plan, only dimensions show up. If I open up bedroom 3, only that bedroom shows, with no dims or context. How do I get one complete plan all together?
View 2 Replies
View Related
Jul 12, 2013
I just re-installed windows and all the fine (PITA!) trimmings. Now, when I open a file (any type) for Inventor thru windows explorer it opens a NEW instance of Inventor everytime! This is a HUGE system hog, waste of time ect ect.
How can I correct this to just open in the instance that is already there?
Inventor 2014 PDS
View 2 Replies
View Related
Jul 26, 2013
We are using inventor 2014 LT in our work place and just recieved it. We are a production company that often makes many variations of a single part baised on the indivual job. I was wondering if there was a way to save one part file with multiple configurations so when you pull it into assembly file you select the configuration you want and then place it on the assembly.
View 6 Replies
View Related
Sep 13, 2012
I have generated around 1200 iParts from my drawing and I would like to generate every ipart in an individual ipt. file.
This is easily done by right-clicking the iPart and clicking on Generating Files. But I can't manage to generate all the ipt files in one go. I noticed that I can hold Ctrl and selecting all the iPart, but I would prefer not spending a couple of hours selecting 1200 iPart.
View 1 Replies
View Related
Jun 3, 2013
Currently. I use datafield to link room names at different scales (1:100, 1:50,...). Do we have the method to link these from multiple drawings?
View 1 Replies
View Related
Dec 17, 2012
I have floorplans from a building with a total of 80 appartments. Now i want to plot PDFs in A3 format, each page with 1 appartment. That would be 80 pages/PDF-files.
The way i did it up to now was i have put all A3 pages in a single layout and used the Window-function in the Plot dialog to print each page individually, manually numbering the file-names, and combining files in Acrobat as needed.
But doing this for 80 pages is too much - especially because i will likely have to plot it more often in the future. As far as i can see, i could make 80 layouts and use the Publish function, make a sheet-list and plot that way.
I keep wondering - is there not a more efficient solution to this problem than creating 80 layouts? There must be a more intelligent solution to this. Whats the preferred way of doing this?
P.S. i use AutoCAD2007 and Acrobat for plotting.
View 9 Replies
View Related
Jun 15, 2012
With ACDLT2010 is there a way to create 1 page setup and force it with one command to all SHEETS (Paper Space) or Multiple Files Model's prior to Batch Plotting a Project?
Reason i ask, is i regularly get files from other contractors, and they use different aspect ratio's / paper sizes / blah bleh blah. Manually going through and changing all the settings is time consuming and would be much easier if i can just pull up a list of drawing's and force a page setup to all pages.
View 6 Replies
View Related
Mar 2, 2012
I have my projects in their own folders. When I start a new project, I copy an older project folder and paste to start a new project. I do this so i don't have to start modeling from scratch each time. The problem when i do this is i have to change the name and part number of each file to correspond to the new project number. This takes more time than i would like to spend doing it so is there a program that will let me do this in bulk? (change the part number of all the files through their iproperties) I typically have to use the design assistant and change the part number of each .ipt file one by one.
HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014
View 4 Replies
View Related
Dec 30, 2013
im currently running a
Precision T3500
Xeon W3520
Quadro fx580
6gb ram
Win7 Ultimate
I'm only running Autocad 2013 LT on my computer without servers.
I need to open multiple files at a time with some of them being 40mb large. Problem is it takes quite sometime to open the large files.
What can i do to improve the performance of opening and working with larger files? Would adding more ram dramticaly improve it? If not, i would go about buying a new i7 cpu.
View 4 Replies
View Related
Apr 19, 2013
I am trying to create a C# program to do batch Title Block attribute updates on selected AutoCAD drawings.
What I would like to do is keep the AutoCAD interface hidden, and just display my custom form which would allow the user to select the drawings that they wish to process.
And then the custom program would load each drawing behind the scenes and update the Title Block attributes, but the AutoCAD interface would remain hidden.
Is something like this possible with AutoCAD 2010? Are there any examples doing something like this (showing a custom form at startup, etc.)?
PS We do have newer versions of AutoCAD available if needed. Our engineers use AutoCAD 2010, but we could use a newer version for this standalone tool which would only be used by 1 or 2 people.
View 2 Replies
View Related
May 2, 2013
In testing my latest automation project, I've found that I can't save copies of a part multiple times (after deleteing the files off the disk) unless I close out of the top level assembly document, and reopen it. I used Process Monitor and determined that Inventor is trying to save to an existing file instead of creating a new file.
Inventor 2013 SP 1.1
View 1 Replies
View Related
Jul 5, 2012
i am wondering if it is possible to alter a specific attribute in cca 250 files? I have this template which has like 50-70 attributes,but not all of them are used. I have to change only one attribute in all of the files. For instance, i have an attribute with a specisfic tag, but the content of it is ie MARK, i want to change MARK to PETER, without having to open,click,retype,save,close every file. Is it possible to automatize it somehow? maybe lisp, batch or even VB?
View 2 Replies
View Related
Oct 26, 2011
I have to import multiple files from Solidworks. I don't have any issues with that except that when I import these files they are base files. All the intelligence is wiped out. I know that Solidworks can import Inventor files and keep all of the intelligence in the file. Does Autodesk have translator software that will allow the import of a solidworks file and keep the intelligence used to build the model?
View 3 Replies
View Related
Feb 14, 2012
I have the need filter inside Vault the Inventor Drawings (.dwg/.idw) by its papersize.
In my testing enviroment, I created a iLogic rule inside a .idw with the following
iProperties.Value("Custom", "Formato") = ActiveSheet.Size
I used the Ruler Trigger "After Save Document" to refresh this rule.
In Vault, I've mapped this custom property:
But, how to Copy (and update) this iLogic Rule to the other existing .dwg files in Vault?
I thought the iLogic Design Copy would be able to do so, but it doesn't works in that way.
View 6 Replies
View Related
Feb 7, 2012
I have a lisp routine that gathers all xrefs from the current drawing and creates a script that opens each xref, runs specific commands then saves/closes each drawing. Once all commands have been ran in each xref I would like the script to reload all xrefs in the original drawing that the script was called from. I have a reload-all lisp that is already loaded in all of my drawings but for some reason when this command is called at the end of the script it will not run.
Is there a way to have the script continue to run in the original drawing that it was called from? Or maybe even pass control back to the lisp that created/called the script? Its seems to me that the easiest thing would be to have the script continue to run after it has gone through all of the specified drawings but this is not working.
View 9 Replies
View Related
Sep 19, 2011
I'm using AutoCAD Mech 2008. is there a way to publish multiple dwg files to individual pdf's.
Right now I typically plot to Adobe PDF, extents/center to plot/fit to paper/monochrome.
Upon doing a search, someone mentioned "AutoPublish" upon closing. Is this an option, and if so, is it my only option?
View 5 Replies
View Related
