My CAD keeps crashing - typically after making simple polyline and arc commands - then stretching them.In the command line is displayed: modeling operation error: free store overflow.
View 1 RepliesHow its possible to make Wireframe with a 3d polyline object?is it Possible?
View 3 Replies View Relateddoes it make a difference if its a line or a poly line? in oder for this command to work?
View 9 Replies View RelatedHaving IV2013 periodically crashing while trying to sort out the new appearances.
its never the same actions it could be updating, saving etc. and IV crashes out.
The new appearances have done nothing but cause issues with us since IV2013 was installed. we are all wishing we stayed on IV2012.
I've searched for a way to make a simple, one color image into a vector image. The best thing I've found is a .atn thing fromsPECtre. I've unzipped it but really don't understand photoshop well enough to use it.
I'd like to learn how to actually do it my self. I can easily make the image into a selection, all I need is to make that selection into a solid vector.
How do I do this?
Illustrator keeps freezing when applying an effect such as texture-grain to a simple gradient, or even rasterizing a simple black circle. My system is about a 6month old macbook pro with 16gb ram, i7 and AMD Radeon HD 6770M 1024 MB. What could be causing this? It wasn't like this when i first started using the laptop but has started to do it everytime i try and do any of those simple tasks recently.
View 5 Replies View RelatedIs there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedI would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedDue to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedIs there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
How do you find 'if' a polyline is inside another polyline?
View 2 Replies View RelatedHow do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View RelatedI have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedI only just got photoshop yesterday and I barely know a thing but I have got an image with 3 layers and I want to make it into a simple animation, displaying each layer in turn.
I am a novice user using C2
I can do this in AutoCAD Map but I have my doubts. I will explain in ESRI GIS terms (this is what I am familiar with) and I hope you can tell me if I can do this in AutoCAD Map. In ESRI ArcMap I can select a line and I can hit a Select by Location button. In this window I can select all of the objects that intersect my selected line. Then I can delete them or export them etc.
In AutoCAD Map I have a polyline selected. It is my road centerline. I want to be able to select all of the other polylines that intersect my selected polyline. Is there a way to do this? I need to erase those polylines. Usually I will pan to each of them and select them individually. It just seems to take a lot of time. My AutoCAD co-worker said I could use a fence and draw the fence through my polylines. It seemed to work ok but I accidently deleted extra things that I needed. So I'm back to manually selecting each one by one unless you know a different way.
How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedHow can I use the commands in macro .
View 4 Replies View RelatedI have set up my standard commands to use a certain layer, ie
~Dimension command switches to my Dimension layer
~Leader command switches to my Text layer
I don't have my Line command set to any layer. I switch layers before drawing a line. I like drawing lines on different layers as needed. I don't like the default to be the Object layer.
Is it possible to have a pop menu open when I select a command to choose a layer? I would like to set a second line command with that feature.
The issue I am having is I can't see some of my commands. For example, if i paste from the clip I cannot see whatever it is I pasted until I say where I want it.
View 9 Replies View Relatedcleaned up the fonts and its still crashing by simply scrolling thru to find a file to open and to make matters worse, my CS2 which hardly ever crashed now crashes just opening it. I am rather beside myself, I have an iMac running 10.6.8 with 4GB of memory. I would love to copy and paste the crash report but it's not letting me do that.
View 15 Replies View RelatedCan you change the commands in Lt 2014. I want to change the copy command (CO) to (C) and make circle (CC)?
View 5 Replies View RelatedI'm trying to do something like this:
[Autodesk.AutoCAD.Runtime.CommandMethod("REFEDIT", Autodesk.AutoCAD.Runtime.CommandFlags.UsePickSet)]
public void RefEdit() {
Document doc = AcadApp.DocumentManager.MdiActiveDocument;
[Code] ......
I haven't undefined the default command, my definition of REFEDIT executes anyway. I wanna be able to run the default command from my definition.
doc.SendStringToExecute(".REFEDIT ", true, false, false); will loop forever.
I haven't had enough of an application to justify trying to figure it out. At this point however, i've designed a small conversion form that can be called by our engineers and allow them to convert between various units. I'd like to have a button though that allows them to call up the Quick Calc application from within AutoCAD. What i'm wondering is how do i actually call a native autoCAD command? Is it possible and if so where could i find documentation on the syntax. For what it's worth i'm working in C# in VS 2010.
View 4 Replies View RelatedInitiated a project with the AutoDesk .net templates for VB.net. I've kept the Extension Application loader that's part of the template, however commands that reside within my other classes aren't recognized. The extension is running because it's responding properly to events that trigger, however I can't call my custom command names from the command line. Could this be a function of the namespace that the commands are in?
Namespace IWC ' This class is instantiated by AutoCAD once and kept alive for the ' duration of the session. If you don't do any one time initialization ' then you should remove this class. Public Class MyPlugin Implements IExtensionApplication Public Sub Initialize() Implements IExtensionApplication.Initialize Dim NewLayer = New IWCLayer NewLayer.IWCLayerSysStart() End Sub Public Sub Terminate() Implements IExtensionApplication.Terminate MsgBox("Layer System Terminating",
[code].......
I'm using Application.ShowModalDialog to display a modal form to the user launched from a button on a tab in a PaletteSet. The modal dialog lets the user click a button to select a point. Is there any way that I can let the user run transparent commands and still return to the modal dialog?
The ideal would be for the user to be able to zoom and pan transparently from the GetPoint prompt. I could also provide a button to allow the user to reposition the drawing.
Using edUsrInt As EditorUserInteraction = ed.StartUserInteraction(Me.Handle) ' Get the insertion point from the userDim prPtOpts As New Prompt Point Options(vbLf & "Select center point: ") prPtRes = ed.GetPoint(prPtOpts)transientGraphic = DrawTransientGraphic(prPtRes.Value, BlockScale) edUsrInt. End()Me.Focus() End Using
1. When I attempt to COPY or MOVE an object that has a line attached to it the line also moves with it. It seems as though AutoCAD is considering them as one unit instead of separate objects. This is especially frustrating when using lines to mark Datum placements.
2. Also, I notice that the above occurs when moving objects, but instead of moving a line with the selection it stretches it. I must have an option selected, but would like to change that.
I am using R14 autocad.
i have created a project drawing , i have saved it as dwg file. But when i open it all my commands are gone, How to get Commands i have used
I found out that my current autocad architect 2011 move command are same with copy command. And also i found out everytime went i start my autocad programe that is an error message like #@%&*&%#@ that i cant even understand.
View 6 Replies View Related