AutoCAD LT :: How To Delete Plot Configurations
Apr 2, 2012
After reinstalling AutoCAD I am trying to clean up the plotter settings and am being plagued by an error message that reads:
PDF995:This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the device cannot be found, or the driver has a problem. The None plot device has been substituted.
This message is related to a PDF program called PDF995 that I no longer have. The first jpg image shows the Page Setup Manager with a current page setup called *A2.0 Arch Site Plan* that I want to delete.
The second jpg shows a PDF Complete printer that I want to delete. On another error regarding plot styles:
The second jog also shows a plot style table that is missing that I want to delete.
View 1 Replies
ADVERTISEMENT
Mar 22, 2012
In the continuing saga of me trying to learn Inventor, I have a question about the said named subject. I have a BOM that I need some subassemblies shown as such and others showing as the individual parts.
How do you configure the BOM to show both?
View 7 Replies
View Related
Sep 19, 2013
I have a cabinet that we make, and we put some holes through the sheet metal skin of the cabinet at the assembly level. I use iLogic to turn these holes on and off, depending on configurations.
Sometimes when switching between configurations the holes that were suppressed will disappear from my model and leave me with just the original sketch. So my iLogic rule errors because it can't find the hole feature.
I am using planes based off of the origin planes to define an axis that I use as my hole center line. And I then make a sketch on the XY origin plane to create a point for my hole. So everything there is independent of the cabinet model.
View 3 Replies
View Related
Jul 19, 2012
I design rubber molds. So, you have a cap, base, inserts, end plates... yadda yadda. Sometimes we use different configurations of a mold to make slightly different parts. For example, say by default, the "-1" configuration will be basically just the cap and base, to create a 6" part. Then, we might have a "-2" configuration with a 1" spacer insert to create a 5" part. What I want, is a parts list to automatically pull in the quantities for the different configurations in separate columns of the parts list. I'm wondering if there is a way to do this using different Level of Details.
One solution I've contemplated is creating the parts list from the "default" assy, then creating a "parts list" of the alternate assembly, but stripping off all but the quantity column... but that doesn't seem horribly elegant, and I'm not sure I can resolve all parts list rows without pegging in some dummy "custom parts".... dunno.
View 6 Replies
View Related
Jul 26, 2013
We are using inventor 2014 LT in our work place and just recieved it. We are a production company that often makes many variations of a single part baised on the indivual job. I was wondering if there was a way to save one part file with multiple configurations so when you pull it into assembly file you select the configuration you want and then place it on the assembly.
View 6 Replies
View Related
May 21, 2013
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
View 1 Replies
View Related
Mar 7, 2011
Is it possible to change the color of a line by changing the display configuration? If so, how?
View 3 Replies
View Related
Nov 29, 2013
Is it possible to export configurations such as command abbreviates display colors, ctb files from Autocad 2005 from one desktop to one laptop with Autocad 2005 and 2014?
View 9 Replies
View Related
Apr 17, 2013
Basically I need to have 2 configurations of an assembly. These assemblies are identical except there is one part that will vary within them. Eventually I would like to be able to drive an assembly with multiple part configurations and suppressing and unsuppressing of parts from a table however this is my starting spot.
View 2 Replies
View Related
Mar 7, 2011
I just completed a sketch for a simple part I'm working on. It contains some arcs, lines, and rectangles that I've drawn. When I went to extrude them to make the sketch 3D, not all of the shapes I created could be extruded, presumably because in my sketch the lines/arcs did not come together properly to create a closed shape.
View 9 Replies
View Related
Apr 10, 2011
I have two hi-def 1280x720 movie clips about 5 minutes and 1GB each (.MOV).
Is there a way to configure the output mpeg-4 files to make them reasonably high quality but not huge in size, as I need people to see fine detail, but not take an hour to download?
I am playing around with batch convert after mpeg optimization, and experimented with reducing the frame rate, frame size, and video data rate. A 20M mpeg-4 file seems much less sharp than I would like.
View 5 Replies
View Related
Jun 27, 2012
Importing Publish Plug-In Configurations between catalogs?
Possible to import "configured" publish service plug-ins between separate lightroom 4.1 catalogs? Example I have a Flickr publish service setup in one catalog for landscape/macro/general photos and then I have a separate catalog for model photos. I don't want to continue to re-create the publish service in each of my new catalogs. The plug-in themselves do show up in all catalogs, but not their configuration.
View 16 Replies
View Related
Mar 12, 2012
What color settings, profiles and configurations are suitable for print publications in Europe?How do I set my Photoshop CS5 (Windows) to print quality?
View 4 Replies
View Related
Jun 2, 2012
I read the Photoshop Windows (read only) thread, titled "Scanning old photos", at [URL]......... I found Robert Shomler's answer useful, even though I am using an i Mac.
I have been using Epson Scan Version 3.01A and the Epson Perfection 4490 Photo scanner to scan reflective photos for over three years. I started using Adobe Creative Suite 6 Design Standard, and Photoshop for the first time, last month. My iMac is about one year old, and System Preferences shows its Display profile as i Mac.
I am befuddled by Epson Scan Version 3.01A's Color Configuration settings. I believe that I've been using the default Color Control, Continuous auto exposure setting for all these years, accept that I apparently changed Display Gamma from the default of 1.8 to 2.2.
I tested scanning the same originals with both the Color Control setting, and the ColorSync, Epson Standard, Target sRGB setting, as TIFF's. The resulting TIFF's look radically different in color, when displayed with Preview and Photoshop. The images resulting from the ColorSync, Epson Standard, Target sRGB setting more closely resemble the originals, except they appear to be a little flat.
At the moment, I have the Photoshop color working space at sRGB IEC 61966 2.1. When I open one of the scans done at the Color Control setting, select Assign profile sRGB IEC 61966 2.1, and check "…convert document to working RGB", I don't see any change in the color. The color does not change to look like the scans done directly to sRGB IEC 61966 2.1. Is that right?
I notice there is also an option to Assign profile Epson Perfection4490 - reflective. When I try this, the color changes to something different from both of the aforementioned test results.
View 11 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Sep 11, 2012
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
View 9 Replies
View Related
Feb 6, 2012
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
View 9 Replies
View Related
Aug 21, 2012
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies
View Related
Aug 29, 2011
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
View 2 Replies
View Related
Jan 17, 2012
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
View 1 Replies
View Related
Jan 17, 2013
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
View 3 Replies
View Related
Aug 13, 2012
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
View 1 Replies
View Related
Aug 8, 2012
I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies
View Related
Nov 29, 2012
I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
View 5 Replies
View Related
Sep 30, 2013
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
View 1 Replies
View Related
Aug 30, 2012
I am aware of the plot stamp available in the Plot Dialog box, however, we are looking at ways to imbed this info in the dwg. I currently have the WD_TB with an attribute for FULLFILENAME, an attribute for PLOT DATE, and an attribute for PLOT TIME12. So I get the information on the dwg. I would like to be able to run all these attributes as a string. I have tried FULLFILENAME|PLOT DATE|PLOT TIME12 with spaces, commas, ( ), " ", etc. and I do not know the proper syntax to get this to work. I have also tried (getenv "FULLFILENAME") or the getvar, in the title descriptions box.
View 1 Replies
View Related
Sep 1, 2011
AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
View 1 Replies
View Related
Jun 25, 2013
In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
View 2 Replies
View Related
May 9, 2011
Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.
View 1 Replies
View Related
Aug 14, 2012
2004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies
View Related
Apr 27, 2012
I'm using autocad 2011 LT License version 5 users & autocad 2012 Lt License Version 5 users.I have got a HP Laserjet 5200 printer, when i give a plot command from one of the workstation having autocad 2012 lt
the application gets terminated automatically every time.This issue is only with a single client having 2012LT all other autocad LT 2012 workstations in the same network plots w/o any complaint.
View 2 Replies
View Related
