AutoCAD Inventor :: Parts List For Multiple Configurations
Jul 19, 2012
I design rubber molds. So, you have a cap, base, inserts, end plates... yadda yadda. Sometimes we use different configurations of a mold to make slightly different parts. For example, say by default, the "-1" configuration will be basically just the cap and base, to create a 6" part. Then, we might have a "-2" configuration with a 1" spacer insert to create a 5" part. What I want, is a parts list to automatically pull in the quantities for the different configurations in separate columns of the parts list. I'm wondering if there is a way to do this using different Level of Details.
One solution I've contemplated is creating the parts list from the "default" assy, then creating a "parts list" of the alternate assembly, but stripping off all but the quantity column... but that doesn't seem horribly elegant, and I'm not sure I can resolve all parts list rows without pegging in some dummy "custom parts".... dunno.
In the continuing saga of me trying to learn Inventor, I have a question about the said named subject. I have a BOM that I need some subassemblies shown as such and others showing as the individual parts.
Any way to create a parametric Parts List containing subassemblies, where the subs are listed, by name/item number, in colum format, and qty's are tabulated accross rows. (see attached as an example). If the same part number occurs in multiple subs, the part is only listed once, but the quantity for each sub would be noted. The pdf attached had to be done manually, which somewhat defeats the purpose of having software like Inventor.
I am creating a template for our title block. We normally will have multiple assembly called out on one drawing. So I created a parts list without headings and built the headings into the title block. The first parts list I enter will anchor to my border, but when i enter the second parts list, it will not anchor to my previous parts list like I would like.
Is it possible to split a parts list onto multiple pages/sheets? My only solution is to place the parts list three separate times on three separate sheets and on the first sheet hide items 11-30, then on the second sheet hide items 1-10 and 21-30, and then on the third sheet hide items 1-20. Is there any other way besides investing in a larger printer and larger paper?
Is there a way in Inventor 2011 to automatically copy a parts list from an assembly on sheet 1 to the other sheets in a drawing? We generally have large assembly drawings with the same assembly spread out over several sheets and have to create a new parts list and update it separatly on each sheet. We also have this issue with revision information which we store in a symbol but parts lists are more prevelent of an issue.
We are using inventor 2014 LT in our work place and just recieved it. We are a production company that often makes many variations of a single part baised on the indivual job. I was wondering if there was a way to save one part file with multiple configurations so when you pull it into assembly file you select the configuration you want and then place it on the assembly.
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
It seems like most people output the whole BOM. I only want to data in the Part Number column, preferably as a list of strings.
Here's what I have so far:
foreach (Sheet oSheet2 in aDoc.Sheets){ for (int i = 1; i < (oSheet2.PartsLists.Count+1); i++) { var oPartsList = oSheet2.PartsLists[i]; for(int k = 1; k < oPartsList.PartsListColumns.Count+1; k++) { if (oPartsList.PartsListColumns[k].Title.Equals("PART NUMBER")) { //what goes here??? } } }}
I've been using the "Phantom" BOM Structure to roll up duplicate .ipt's when I have more than one sub-assembly within a higher .iam and it has worked well.
Question - is it possible to adjust settings so that the .iam that I "Phantom" itself remains as a visable line item in the Parts List while still rolling up like .ipt's?
I have a drawing and I need to get a list of parts. I see *most* solutions use the parts list on the sheet itself. I will not have access to that. Is there a way to get a list of parts WITHOUT accessing oSheet.PartsList[1] ?
As an academic interest I was trying to convert Brian’s code for exporting Parts list with thumbnail to VB.net 2012. I just modified the below code to remove the vb6 support. I am using VS 2012 and Inventor 2014. The end result on the word report thumb nail for some parts are not visible. It goes to the error code and putting the text instead of thumb nail. At the same time Brian’s code as it is (used the exe file to install it) works fine on the same parts list with all thumb nail.
#Region "PictureToImageConverter" Public NotInheritable Class PictureToImageConverter Inherits System.Windows.Forms.AxHost Private Sub New() MyBase.New(Nothing)
We would like to put barcodes in a parts list. To create a barcode we use a special barcode font.
It's impossible to have two types of fonts within one parts list, but is there an other way? Is there code (VBA) to generate a table with an extract of the bill of materials and a barcode generated
with a special font on the fly. We would basically need a parts list with an extra column for the barcode.
is there any way to make all the rows in the BOM/parts list on an IDW the same height? I did a search on this and saw nothing new on this. the reason we need this is for a program we use after export to dwg. it is a program we use in autocad that is a txt copy lisp program to populate attributed customer title blocks.
win 7 64 bit sp1 cpu intel xeon E5-2687W0@3.106 eight core two solid state hard drives 32 gig of ram Autodesk product design suite premuim 2014 64bit Nvida quadro 4000 Space Pilot ver. 1.6.2 2010 slphantom (NNTP handle: scottl)
Want parts to be sorted from 1 ascending. Add a part number in custom properties as a number. Asks the part list to sort - ends like this: 1, 10, 11, 12, 13, 14, 15, 16,......, 2, 21, 22, 23, .......,3 , 31 and so on ?????
I'm trying to create a parts list that will show item numbers for the sub assemblies and the individual parts for each sub assembly. When I'm creating the parts list in the drawing, the option for "All Levels"is greyed out once I select my source assembly. How I can show this in a Parts list?
I have an assembly that I have the BOM property set to phantom. Consists of 7 parts, each have a bom property of purchased.
All parts are the same but cut to length in the shop. Parts list are based on parts only BOM. If I create a parts list based on just the assembly, I can group the items, they all have the same part number, and display the group participants, and the item numbers and everything works as expected.
If I use this assembly as a subassembly in a larger assembly and create a partslist with the same group keys, the subassembly does not show as a group, does not show group participants or corresponding item numbers.
What I'm trying to do is show total length of a product that we buy on a spool for this assembly. To do this I'm using substitution in the qty column. Most parts are purchased each, these are purchased by length. What would cause the parts list to display as a group in one list but not in the other?
I have a drawing detailing an assembly with a 3 sub- assemblies. Each sub-assembly has 4 parts. When I add a parts list only the 3 sub-assemblies are listed. Is there a way to generate a parts list with 12 parts?
How to set display of precision in my parts list to just one digit?
When I edit parts list set up im styles editor or edit parts list and go format column, apply units formatiing and set columns for one unit type and precision, then I get an error about units being incompatible because some items I have listed as each some by lf.
How to change precision in one column of parts list and keep unchanged unit formatting?
Styles in Inventor have always been confusing to me. I have ONE project file, ONE teplates folder, but TWO different drawing templates (one for single part drawings, one for assembly drawings). For simplicity sake, lets say the ONLY difference I want between the two drawing templates is the parts list. The assembly template parts list should have lets say one more column than the other.
I did what I thought should do it but it isn't working properly. What's the best way to accomplish this? Right now within the same style library I have two parts lists set up, and I have two "standards". The only difference between the two standards is which parts list box is checked on "available styles". When I change "object defaults" to onw parts list or the other, it changes that default for all drawing templates, not just the one I'm using.
I have one main assembly with two seperate sub assemblies in it. I need to make two drawings showing the installation of both sub assemblies (one drawing for each). I need to insert views of the main assembly into each drawing, showing the overall view of the install, but I need the balloons to represent the sub assembly BOM.
I tried making the sub assembly I'm not currently showing, Phantom, and I have a design view set up to hide the information of the sub that is not part of the current drawing. That seems to work fine for the first drawing, but when I change the BOM (of the main assembly) to suit the next drawing, it affects the first drawing. How can I use one main BOM to suit two different drawings, showing only certain components? Or can I "tell" the balloons which BOM to reference? (I have the BOM of the sub assemblies set up the way I want them as well)
I have what turns out to be the first parts list in three years where I need to sum the lengths of a couple items together to get a total length for that material in feet.
What do I need to do to get the two lines in the attached screenshot to sum their lengths together? I would be happy to add another column to the list for this, perhaps the "Unit Quantity" column where most everything is set to "Each" but the two lines shown are summed into a length in feet (or anything like that). How can I accomplish this?
I'm having trouble understanding the way the BOM list uses row merging. I want to change all the materials in an assembly easily, however the part with the merged icon will not allow it and I end up with this error.
1. what is this? and how do I make it a normal "yellow block icon" part?
2. is there any other way to change the merged part "material" column from greyed out to normal?
In Inventor 2010 is it possible to change the numbering system so that it continues sequentially with each assembly / subassembly added across the sheets in a drawing file?
I want to be able to take a few parts and group them together to make them appear as one single entry on the parts list.
Example: I have a Liquid Level Switch, Mounting Bracket and mounting hardware in the assembly as separate parts. On the .idw Parts List I need to have them show up as one item, as a 'LLS Kit' phantom.
Also, these parts will be used on other assemblies and will probably be used with other main components (ie. Temperature switches, pressure switches, etc.) so then need to remain independent of one another.
