AutoCAD LT :: Characters In Table Not Lining Up
Nov 8, 2012
We've just replaced two users windows xp x64 pro machines with Windows 7 x64 pro and as a result have had to purchase AutoCAD LT 2013 for both (one was using LT2002, the other LT2006).
Now however the drawings that they open have tables with text in that aligned perfectly when viewed in 2002 / 2006 but 2013 shows some of the characters outside of the table?
We thought it could be because of custom fonts we use but I have copied them across to Control Panel > Fonts on both machines and Installed AutoCAD LT 2013 Service Pack 1, again to both machines but to no avail .
View 6 Replies
ADVERTISEMENT
Jan 4, 2013
I want to create a table with all characters inside a font.I used "%%" to change a number to it's character.but "%%" limited to 999 and for numbers bigger than 999 it doesn't work.
also, CHR command limited to 255 and for numbers bigger than 255 it change to (number-255). so I used "%%" to create this table:[Please change default font in your AutoCAD to ARIAL]
(Defun c:charmap ()
(setvar "cmdecho" 0)
(setq cnt 1.0)
(setq r_cnt 0.0)
(setq ts 32)
(setq x 0.0)
(setq y 0.0)
[code]...
I want to know:
1- what can I do for numbers more than 999?
2- How can I know the number of characters inside a font?
3-how can improve my LISP program to have complete characters inside the fonts?
View 2 Replies
View Related
Aug 19, 2013
How to deal with this situation. Insections not lining up
View 9 Replies
View Related
Aug 7, 2013
I need to dimension a line in the Z plane in the northeast view. The dimension is currently perpindicular to the dimension line. How to make it parallel with the dimension line.
View 1 Replies
View Related
May 17, 2012
I am working on some car parks and am using corridors. There are some area's that consist of seperate regions to tie up corner areas and junctions etc.
I am using link codes to create hatch and would like to use non-solid hatch. But the hatch does not appear to line up properly between regions, as shown on the attached image.
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
View 4 Replies
View Related
May 9, 2005
I have like 10 equal dimensions layers, which i need to line up, but they do not "stick" to the guide as they used to in CS1. does someone know how to enable that feature in CS2?
or better techniques to line up layers? (i also need to set the space between them to be the same)
View 5 Replies
View Related
Jul 4, 2013
I understand that revit is the future and that it is very impressive at doing very complex & mundane tasks, however it does seem to struggle to do the simplest of commands.We wish to be able to put tags (in this case room tags) either in the middle of the room or align them all to each other (i.e if there is a corridor with rectangular rooms on each side of the corridor all tags on the left hand side would be in a single line in the middle of each room, as they would be on the other side).When you place the room it gives you some cross hairs but you cannot locate these in the centre of the room.I have looked for draft line/reference lines/ghost lines and anything that you can put in temporary to use as a guide.
View 9 Replies
View Related
Nov 25, 2013
Do I have to use the Stack Walls family in order to have my walls line up on top of each other between the levels? My walls are all slightly off in 3D view and look messy..
View 3 Replies
View Related
May 24, 2011
I downloaded the blueprints for a Cobra Helicopter, and the side and front blueprints are not lining up correctly at all. I am not sure if this may be an issue with the actual blueprints themselves, or something I may be doing incorrectly. Below illustrates the problem, the green and red lines show areas where the front and side blueprints do not line up at all. Here are the blueprints I am using, I cropped both the front and side blueprints from the top and bottom most point. [URL]
View 4 Replies
View Related
Sep 5, 2013
Is there any way to set characters to "tabular lining" in open type or other way in Photoshop? I commonly control my numeral characters in Illustrator with the Open Type palette, setting numerals to "tabular lining" so they will align vertically with each other, versus the default oldstyle numerals that come with many fonts.
Here is visual example : First row being "tabular lining" :
As you see, this is available in Illustrator, as shown :
But I'm not seeing this in Photoshop. I'm working with the typeface Adobe Calson Pro, in small caps... but the numbers look awkward.
View 2 Replies
View Related
Jun 25, 2013
I'm creating an animation of a magic 8 ball rolling towards the screen, getting larger as it comes forward. Now that the animation is complete, I would like to put it on an ease path to make the motnion look more realistic. Unfortunatley, when an easein is set for the 8 ball, it will skew the shapes, and everythign sort of flies off in all directions and then lands back where it should be at the end.
How it looks with an easein during the animation, and how I would like it to look during the animation.
View 4 Replies
View Related
Dec 18, 2008
I have been taking pictures (like 20+) of our new house that has been being built over time. I was taking them while standing in the exact same spot across the street, and trying to line them up the same, but of course they are not perfect. Is there a program/script that will take pictures and line them up together like by user selecting 4 common points and then it will resize/skew each picture to line up those 4 points, and hence the picture?
View 1 Replies
View Related
Dec 18, 2008
I have been taking pictures (like 20+) of our new house that has been being built over time. I was taking them while standing in the exact same spot across the street, and trying to line them up the same, but of course they are not perfect. Is there a program/script that will take pictures and line them up together like by user selecting 4 common points and then it will resize/skew each picture to line up those 4 points, and hence the picture?
View 2 Replies
View Related
Mar 15, 2012
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies
View Related
Mar 14, 2013
In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
Feb 23, 2012
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
View 4 Replies
View Related
Mar 2, 2011
What I want to do is, take away the wolf body and background. Then I want to make his face sorta fade with a gold lining of his face. SO it wouldn't be exact detail, but you know it's the face of a wolf, with cool gold out lines and lines on the inside and stuff. With like faded areas for cool effect.
View 5 Replies
View Related
Nov 30, 2013
During 2014 I would like to create 'photo a day' video of myself, similar to this [URL] ........ I have no plans to inflict my work on the world via YouTube and the like, it is purely for my own amusement.
My question is a compositional/editing one. I understand how to take the stills and create a video from them using Windows Movie Maker, not the best software but sufficient for my purposes.
In the link above the young ladies eyes and nose stay at a (mostly) fixed point in the frame, I find this makes for a better video when all the stills are run together. The problem I have, is, when I take stills of myself my nose and eyes are at different positions frame to frame which makes for a rather jumpy end result.
Any tips on how to remedy this, is it done when taking the shot, or in editing afterwards? The shots are taken on a small point and shoot digital camera, as the shots will be taken at various locations etc I wont be able to have a static setup with a tripod and mark on the floor to ensure the same position each time. The method I have tried it just holding the camera out in front of me at arms length and trying to get the same height each time.
Is there a way to easily and quickly edit shots in Paint.NET so that the eyes and nose are at the same position in each frame for a series of photos, I'm not too bothered about all the frames being the same size or the edges lining up etc.
View 6 Replies
View Related
Jun 25, 2012
How can I get multiple images on 1 page to line up when printing on both sides? Dimensions are 3.5x2.5, 9 to a page. They are sportscards for son's baseball team. They are slightly off by 2-3 cm on all 4 sides and in betweeen. Extremely frustrating. I tried printing in Photoshops but text is blurry. In Lightroom, Images look absolutely perfect. If they would only line up. Using a Canon MG 6200 if that matters.
View 7 Replies
View Related
Oct 16, 2013
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
View 3 Replies
View Related
Dec 9, 2011
Having an issue trying to join an access table to a shp file attribute table. I want to use the access table to cross reference the shp file for matching parcel numbers. I have attached the access table in the ODBC using a data source name however it seems to not give me the option to view any records.
View 2 Replies
View Related
Feb 18, 2013
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies
View Related
Nov 20, 2012
I am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
View 1 Replies
View Related
Dec 13, 2013
How can I export a excel table to Autocad not as an OLE object but as a Audocad table?
View 7 Replies
View Related
Dec 31, 2013
Say I had two tables located within AutoCAD, can I make it to where if I put data in one cell of one of the tables that it could automatically populate in a different cell in the other table? Also if this can be done, could it be done linking the data in-between separate layouts?
View 9 Replies
View Related
Jan 18, 2012
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies
View Related
Feb 13, 2012
We have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
View 3 Replies
View Related
Mar 19, 2013
I am trying to add Chinese characters along with my English notes. I had someone translate into Chinese characters, but when I try to paste the characters into my text, they all change to ? marks.
View 1 Replies
View Related
Oct 13, 2012
We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.
All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.
For CC items, we have added columns for these and mapped them to the appropriate iProperty.
Everything works great except for one thing.
Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol. For our normal library parts thhis is not an issue. However, CC items utilize these characters differently. The result is our descriptions come out different that what is entered.
See the example below...
How to include these characters in the CC descriptions?
Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
View 8 Replies
View Related
Jan 3, 2013
I'd like to build a rule into my standard part template that takes the part number (which it automatically gets from the file name by default), removes the characters after a delimiter, as well as the delimiter itself, and sets that as a new custom property. For example, we'll call the custom property Prop1
For part 123-321-1.ipt
Inventor already sets part number iProperty to 123-321-1
I want to set Prop1 to 123-321
For part 123-321-25.ipt
Inventor already sets part number iProperty to 123-321-25
I want to set Prop1 to 123-321
View 4 Replies
View Related
Feb 8, 2012
I just started getting strange characters on labels that I print from a data table. The process I use is to use mtext with fields to get infromation from the client abbreviation, job name and part numbers onto labels used to keep track of parts and for assembly.
I have used this for some time with no problems but today..... Attached is the template I use and a nested drawing using the same template but with actual data. The one with data works with no problems. I'm pretty sure no variables have changed between them.
View 1 Replies
View Related
