what method do i use to place random holes on the part file attached.how do i place the holes with the correct angle? I`m unsure on how to perform the task of placing the holes randomly around the part with correct angle. How can I do this for 3mm holes?
View 9 RepliesI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedIn the attached part, I am trying to show a hole drilled at a compound angle. I have attached a pic of what the part is supposed to look like. I am having trouble laying out the plane on a compound angle. The hole should be centered on the width of the flat and drilled through. 15° angle one way and 20° another way.
The ipt file attached is really messy in attemps to acheive the compound angle.
I am using Autodesk Inventor 2013.
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View RelatedHow to get the correct notation for the angle in degree/minute/second?
I wanted to show the angle as 29˚12’13’’ but not as 29d12’13’’
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
i use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
I have an issue exporting my AutoCAD civil 3d model to 3d dwf. I have exported my model to 3d DWF and am viewing it in Navisworks. When the model is viewed in the full render mode the material surface is not in the correct place, it appears to several hundred units (the model is several km2) lower in the Y direction then it should be. In autocad civil 3d when the surface is selected and displayed in the object viewer it is displayed correctly. Is there any reason why this is happening or a workaround to fix it when exporting.
Notes: AutoCAD Civil 3d 2012. Navisworks 2012. Surface render material is a Jpeg. When I originally referenced the Jpeg the surface was mirrored (I understand this is a common problem with the software) and I had to mirror it along the X axis so that the Image was upside down but the material viewed correctly. It is not upside down in the 3d DWF, just moved down.
I'm in need of a photoshop plugin that corrects barrel distortion caused from a wide angle lense. The photographic subject is achitecture. I've been told that a plugin exists however I have not found it.
View 4 Replies View RelatedI have used a driven contraint in a sketch.
Can that also be done in an assembly?
In one assembly I want to make one angle half of a driven angle.
I have created a document that will be cut to 120mm x 120mm, I wanted to include a 10mm bleed around it so I made my Photoshop doc 140mm x 140mm.
When I go to the Print dialogue I have checked "Corner Crop Marks", set the bleed to 10mm and in the preview I can see that the crop marks are inside the image, marking out the correct 120x120 area. However, when I click Print the marks appear on the paper at the 140mm x 140mm area.
Has anyone else had this error, and even more importantly, has anyone found a solution?
I am using Photoshop CS3 (a site license of Web Premium), on a Mac G5 running Windows XP SP2. I have other machines & Photoshop versions available,
In Revit 2012, how do I place a wall at an angle to the ground plane, so it can be connected to a roof above? I have tried placing a wall on level and rotating it, however it does not appear to work. I can rotate other elements, but not walls.
View 1 Replies View Relatedhow to correct the lens distortion from a wide angle lens that makes buildings lean in as they go up.
I only have PS6,
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
I am working on some VB code to reterive the dimensions fron an IDW and put them on an excel spreadsheet for an Inspection report. I found some code to which gets the linear dimensions and have added tolerance type and tolerance bands.
I have been unable to get the hole notes off the IDW. Got the general notes to work with the following
Dim invDrawNotes As Inventor.DrawingNotes
Dim invActDrawNotes As Inventor.DrawingNote
Set invDrawNotes = invActSHT.DrawingNotes
[Code]....
I need to add thread to a hole but cannot do this under the edit command. How to do this ?
View 7 Replies View RelatedIs there a way to tell Inventor to use the mean value for threaded holes? As it is IV always puts the Minor-min value for the hole size, which is a PITA for any and all CAM software.
The thread data can be extracted in CAM, but the hole size still remains what it's modeled as. I know I can edit the spreadsheet and cheat it, but that isn't exactly the correct way to go about it.
I'm trying to get hole tolerance by Inventor API using c++ but the value returned is not correct.
the code is:
Parameter* diam = m_Feature->GetHoleDiameter(); // m_Feature is a given HoleFeature
double tol = diam->Tolerance; // returned 1.0
BSTR str = diam->Tolerance->HoleTolerance; // returned "0".
// The correct value is 2.89
How can I get the correct tolerance value?
I can't get Inventor 2013 show a custom iproperty correct.My iLogic rule is this:
iProperties.Value("Custom", "myvol")=volume = iProperties.Volume
But the custom iProperty is a Yes or No.Had no problem with this in Inventor 2011.
I want to use the Hole command to place tapped holes to hold a pair of shafts in place inside a part using setscrews. I can make the holes for the shafts without issue. While cutting the holes for the setscrews I thought I could use the "To" Termination option and select the shaft hole as the terminating plane. However, when I do this I get en error:
"The attempted operation did not find any intersection between the Toolbody and the selected 'To' termination face/plane. Change the termination definition or the feature (profile) position."
I can work around the problem by using the fixed "Distance" termination option but this is obviously inferior as it would require manual adjustment should the shaft holes need to be repositioned. Am I missing something?
Sheet Metal Parts > Punch Holes (Contintued).
I picked the ADSK-METRIC-120 to change the hole size from 25 to 120, but the new hole size ADSK-METRIC-120 is RED color and I cannot refresh or finish it. why size 25 worked, but not the 120?
I am using the Autodesk Inventor 2012.
My part does everything I want with threads but the other option I need to program is a straight hole with no threads. I assume I can do this with Param for the existing hole but not sure what it would be called? Is there a list or method of determining what these parameters are called so I'll be able to find them in the future?
View 1 Replies View RelatedIs there a way to do this? 2 parts, 1 has a hole in it and the other has a slot. I want to constrain the center of the hole to the center of the slot. How do I do this?
View 9 Replies View RelatedI have a drawing of a sheet metal part that I did late last year. I used a Hole Table to dimension all the holes.
Fastforward to today. I added two holes that are different in size than any other hole. So when I opened the drawing it automatically added them to the Hole Table and gave them tag #'s in a new group and it kept the grouping in Alpha order. A, B, C were there before and it added D. Great, that's the way to do it.
Then I decided I needed to change the hole size. The change would keep the size different than any other hole on the part still. I go into the drawing and it change the size in the Table BUT, it also moved them up to the top of the list but kept the tag # as D*.
How do I get those two entries back to the bottom where they belong to keep them in order?
I have the simple (for you ) question about hole tolerance window: I want to open hole tolerance dialog box and "click" OK button (ofcourse I want to do that via VBA code). Only this, I wouldn't change tolerance type or value of tolerance.
I show you what I want on screen.
What I have is a round part with a few features. I drew it in Inventor until I got stuck with the last feature, which happens to be a hole, on the OD of the part that is at an angle (don't care what angle so long as it doesn't intersect with the hole next to it).
I have screen shot? both the mechanical 2D version and my 'so far' Inventor version, how I can go about modeling this feature?
Btw, the hole this has to connect to is the one highlighted green in the bottom pic or the only one dimensioned in the top pic.
I am basically new to inventor and I would like to get any tips from this forum on how to go about creating a pocket hole like the Kreg Jig. I am a woodworker so this would come in very handy when I am building furniture sketches.
View 9 Replies View Related