AutoCAD Inventor :: Add Offset Hole To OD Of A Part
Nov 17, 2011
What I have is a round part with a few features. I drew it in Inventor until I got stuck with the last feature, which happens to be a hole, on the OD of the part that is at an angle (don't care what angle so long as it doesn't intersect with the hole next to it).
I have screen shot? both the mechanical 2D version and my 'so far' Inventor version, how I can go about modeling this feature?
Btw, the hole this has to connect to is the one highlighted green in the bottom pic or the only one dimensioned in the top pic.
View 5 Replies
ADVERTISEMENT
Feb 1, 2013
We have several chain guards which we punch from sheet metal. We recently changed our practice to punch a hole pattern in the part rather than weld in a mesh screen - saves shop assembly/fab time. See the attached 2 parts.
My question: Is there an automated way of delelecting all holes within X" of the part edge. Currently we have to go through one by one and it takes a lot of time. how to model this part more efficiently. As you can see, the designer of the new part got lazy and did a rectangular pattern. The goal would be to have a consistent margin around the full perimeter of the part more like the first.
View 6 Replies
View Related
Oct 19, 2012
I would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies
View Related
Mar 20, 2012
In the hole command i am trying to place a clearance hole for 10-32. When i click on teh clearcne hole icon it says loading therad data please wait and then nothing happens.
View 6 Replies
View Related
Mar 8, 2013
I need to create a hole table for a part. I would like the origin to be at the center of the part. Problem is there is not a round hole at that location. Attached is a similar part. The one that I am doing is much larger and has many more holes... this is just an example.
How can I pick this as the origin of my hole table?
View 3 Replies
View Related
Jul 23, 2013
I am just starting with inventor and love the capabilities, which makes me think this is possible. I am creating a cross dowel nut (also called a dowel nut) that looks like a barrel with a threaded hole on the side. This nut is intended to be inserted into wood and connect with a screw. Is it possible to create this cross dowel that also contains the hole surrounding it so when I insert the part into an assembly (a sheet of wood), the hole is created as well?
View 9 Replies
View Related
Jul 3, 2012
I'm trying to create a hole in a sheet-metal part so that a pipe can be welded in it, see attached picture. What's the best method to do this? Because the flat-pattern of this hole isn't an ellipse-shape (more like an egg), it seems it's very difficult to do.
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 9 Replies
View Related
Jun 22, 2006
Is there a way to default to a standard hole size when starting a new part? ie. If you mostly place 10mm dia holes can this size be configured to be default in lieu of 3mm on the hole dialogue box.
View 5 Replies
View Related
Aug 10, 2012
I have a sheet metal part which has several holes in, from which I have created a hole table. The hole table does not list all the holes in my part as I am only permitted to to select holes on one face of the part in the selected view. I have tried selecting all holes on the Isometric view however I cannt do this either.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 5 Replies
View Related
Aug 17, 2012
I am trying to patch up a bunch of small holes in a derived assembly. I've tried going to the options tab that comes up when deriving the part/assembly and plugging in values for the range of hole sizes to be patched, but I get no results when clicking ok. I have scaled down the assembly to 1/10 the original size. I set the range of holes to be patched from 0 to 0.25". The diameter of the holes in the assembly are only 0.017" after scaling down.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 2 Replies
View Related
Feb 22, 2012
I am trying to link a hole feature in a part in an assembly with the number of a particular feature in another part within the assembly. I have a base plate part with a coutersunk hole feature that I want to pattern by linking it to the number of bosses in another part within the same assembly.
View 6 Replies
View Related
May 28, 2013
at assembly level hole feature shown only in assembly. how to create same feature at same position on parts.
View 5 Replies
View Related
Nov 28, 2012
Using 2013 sp1.1...After I change the hole size in the part, the callout in my hole note does not update. (crazy, I know).
If I pull a new hole note after the change, it has the correct dimension. But, if I change the hole size again, this new hole note does not update.I put the part on a new idw and it updates correctly, so somehow the idw is hosed.
View 2 Replies
View Related
Nov 21, 2011
If we require to create patterned holes thru a number of solids, this works great only requiring the one hole feature.
However, once an assembly is created with the parts, (these parts obviously have their own derived individual solids in them) when needing to place a bolted generated assembly to the patterned holes. It won't recognise the pattern.
So I've come to the conclusion that the bolted generator/drop place function really needs improvement for solid body modelling technique. (Mind you, the BG needs a complete rethink because its at about 50% complete).
What I can see needs to be added, is the functionality of the parts recognising the hole pattern. e.g. when using the make components function it gives an option to add a link to the hole feature.
My only other option at present is to create the holes within the assembly file and transfer the hole feature to each part file. This obviously loses the parametric functionality.
View 3 Replies
View Related
Nov 6, 2012
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
View 5 Replies
View Related
May 22, 2012
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
View 9 Replies
View Related
Nov 19, 2012
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
View 7 Replies
View Related
Nov 28, 2012
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies
View Related
Apr 27, 2012
I have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies
View Related
Dec 9, 2011
I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies
View Related
Aug 28, 2013
i use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
View 1 Replies
View Related
Jun 17, 2013
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
View 2 Replies
View Related
Jun 18, 2012
put a hole through the side of a 3d cylindrical part?
..___________________
/ ........ __ .................
...| ....../... ..< There....|
...| ......\__/ ................|
/___________________/
I had trouble uploading a screenshot of the part, awful drawing. Essentially the hole through the side of this crudely drawn cylinder is what I need to add. I am using AutoCad 2000.
View 9 Replies
View Related
Mar 6, 2012
C3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
View 5 Replies
View Related
Jun 7, 2013
I need an offset lisp routine to offset a selected line a set distance on each side of the selected line and change the layer of the offset lines to the current layer, and then keep prompting me to select the next line for offsetting until I'm finished.
View 3 Replies
View Related
May 14, 2012
I am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc. it will display the entire offset.
I created two expressions: IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)
and this one: IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)
I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions.
I have attached the file, the style is ACHD-Sta Off-Rt [copy]
C3D 2011, Win x64
View 9 Replies
View Related
Dec 18, 2013
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
View 1 Replies
View Related
Aug 9, 2013
I am working on some VB code to reterive the dimensions fron an IDW and put them on an excel spreadsheet for an Inspection report. I found some code to which gets the linear dimensions and have added tolerance type and tolerance bands.
I have been unable to get the hole notes off the IDW. Got the general notes to work with the following
Dim invDrawNotes As Inventor.DrawingNotes
Dim invActDrawNotes As Inventor.DrawingNote
Set invDrawNotes = invActSHT.DrawingNotes
[Code]....
View 3 Replies
View Related
May 16, 2013
I need to add thread to a hole but cannot do this under the edit command. How to do this ?
View 7 Replies
View Related
Dec 14, 2011
Is there a way to tell Inventor to use the mean value for threaded holes? As it is IV always puts the Minor-min value for the hole size, which is a PITA for any and all CAM software.
The thread data can be extracted in CAM, but the hole size still remains what it's modeled as. I know I can edit the spreadsheet and cheat it, but that isn't exactly the correct way to go about it.
View 5 Replies
View Related
Feb 5, 2012
I'm trying to get hole tolerance by Inventor API using c++ but the value returned is not correct.
the code is:
Parameter* diam = m_Feature->GetHoleDiameter(); // m_Feature is a given HoleFeature
double tol = diam->Tolerance; // returned 1.0
BSTR str = diam->Tolerance->HoleTolerance; // returned "0".
// The correct value is 2.89
How can I get the correct tolerance value?
View 1 Replies
View Related
