I'm looking for a solution to export surface finishes into Excel. We built an assembly and parts and their faces has different colors. Is that possible to read colored faces, merged them by color, read the total surface area and then export into Excel. That is for estimating purposes. I read the thread "Extracting Surface Finish Data" but I didn't find the piece of code that I need.
View 3 Replieswhere i can find the surface finish symbol in autocad 2009 ?
sym06.png
The Photoshop 6 beta program froze while using the crop tool on an image size of 8052x5368. I tried to save a file in another program while waiting for the crop to finish (usually about 1 second) and got an out-of-memory error. I checked the D: driv where the file in the other program was saved.
I have a flash C: drive and is not selected in the scratch disk preference. Two scratch disks, E: and G:, are selected with a total of about 800GB free space. After closing PS6Beta, the D: drive recovered about 164GB. The D: drive is not selected in the Scratch Disk list. I work with larger files and anticipate this problem again.How can I trap information for Adobe next time?
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
I am trying to find a way to import a laser scanned mesh or point cloud file into Inventor (2013) such that I can use it to make a parametric representation of the form. The import format can be STL, OBJ, VRML, XYZ or PLY. I have tried the Mesh Enabler from Autodesk Labs but the files I am looking to work-on are bigger than the enabler can cope with and my system slows right down or locks-up.
I know bespoke reverse engineering software is the ideal way to go but I was hoping there was a way to model over a mesh to represent its form to create a placeholder in a parametric assembly. I'm not looking for accuracy, just a surface or solid output that can be constrained to native inventor parts. If I could get the files to STEP or IGES someway that would be enough.
I'm wondering if there is a possibility in Inventor to export a surface model as a STL file. I use CAD programs to prepare models for simulations in other software and I would like to work with Inventor because my Department uses it. Till now I have been using Solid Works and with a little trick it is possible to export surfaces as a STL file. In Inventor I didn't manage to do this. So, is it possible?
View 9 Replies View RelatedCan inventor export tube bending data from a part file? OR Is there a third party software
View 1 Replies View RelatedWe have an idw package we use for Quality control. This idw has more than one sheet. Each sheet has a part placed on the sheet with dims.( DWF attached). Next we open DA inside of the file and run a report. (exported txt attached). I am trying to use ilogic the make the same report with a iLogic browser button pick. I have 2 codes (code examples on attached jpg) that i need to make into 1, or whatever works.
1st code
Dim oDoc As DrawingDocumentoDoc = ThisApplication.ActiveDocument Dim oSubDoc As Inventor.Document Dim oPropSets As PropertySets Dim oPropSet As PropertySetDim oPartNumiProp As Inventor.Property For Each oSubDoc In oDoc.AllReferencedDocumentsIf oSubDoc.documenttype.
[code]....
2nd code
fileheader = "QAF Parts for Planning "fileheader1 = ThisDoc.PathAndFileName(True) 'first line header of txt filedescription = "Components to use for Nesting" 'use this variable in the body of the txtdelimiter = "," 'character to separate the names and values on each lineoWrite = System.IO. File. Create Text (ThisDoc.PathAndFileName(False) & ".txt")oWrite.WriteLine(fileheader) 'include the fileheader on the first.
[code]....
When I use the mirror component, is taking around 15 minutes to finish (3 simple sheet metal)..
View 3 Replies View RelatedI do a lot of hydraulic modeling and create river bed surface datafrom surveyed points. I need to be able to transfer the surface data from Civil3D to GIS effectively. The issue is that GIS does not maintain the fidelity of my surface based on the breaklines I've drawn. It triangulates based on vertices and often triangulates through the feature lines. In LDD, I was able to do address this by adding vertices to my 3D polylines in a batch-type function. That is, I could select all of my 3D polylines and add vertices to them at the same time. In Civil3D, I have to add vertices to each feature line individually.
Any way to add vertices to feature lines, or to a surface, in a more efficient manner that maintains fidelity of surface data in the transfer from Civil3D to GIS?
I am learning to use surfaces in drawing, My main aim is for volumisation tasks. I had been following a tutorial that relied on creting surfaces. i.e
1) from the home tab> Surfaces> Create Surface
2)Add data. From Modify Tab>Surface> Add Data> Point Files.
This worked for me to start with but after changing some settings (looking to display a missing toolbar, I clicked or unticked one or two boxes, Not sure where, I know silly!). The only options I have in the drop down from "add data" are: Boundaries and DEM files. All other options in the list are not clickable.
What setting I need to change or perhaps restore all settings to default. Any comments on volumisation (spoil heps, Data is x,y,Z from survey equipment.
I have created a data shortcut to a surface using Civil3D 2011. When I create a reference to it in another drawing, it shows up in the Prospector but nothing shows up on the screen. I have played with the surface style and made sure all the layers were on and tried closing and reopening the drawing.
I have also tried to reference it into a brand new blank drawing and I even tried to reference a surface in a different file that I have referenced several times before (in 2010). Every time I get the same results. It seems like the surface is there, but I just can't see it.
A GIS person has asked me if I was able to convert a Civil 3D surface they have received into raster data files so she can use the data with ArcGIS. Just wondering if this is possible with Map3D? She normally gets someone in another office to do it, he uses an ArcGIS addon to take the data of the surface and converts it. The result is a bunch of ADF files and an XML file.
View 6 Replies View RelatedI have a surface made up of gradings and feature line that I had to come back to and edit. I picked the surface and selected go to source file and when I got there one of my infill's has gone missing and the surface has a big hole in it. The weirdness is the sheet file that refs it does not have the hole. What is that all about.
P.S. Editing a surface built up like a Rube Goldberg contraption is no fun at all. Glad my best practices are coming along since
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I am working in Civils 3D 2014 and I have a survey with points already on the correct elevation layer, I have tried creating a surface from this but it does not show up.
My process:
- I create a new drawing and insert a block (my topo survey) and click explode when I do this
- I create the surface by TIN and make sure I have the correct layer for the points that I am selecting
- Click ok
- Then go into that surface and turn on all layers and refresh - still nothing
- I also made sure that my surface style was 1m contours so I would definately see this.
I have created a contour layer in MAP and need to bring the data into Civil (to create and EGL surface) which I usually I do via an alter properties query.
There is the Create Surface from GIS data in 2014 but this requires shp files so the two questions I have are:
Can the contour layer be output as shp files (and if so how)?
If yes, is this easier/more efficient than my current workflow?
(No connection with Autodesk other than using the products in the real world)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I am rarely new to map 3d. What I would like to do is to export 3 dem surface in any kind of format, so that I could open it in 3d max.
I know how to generate Contours, but when I export them to dwg and later open in autocad architecture there are missing info on z coordinate - so everything is flat.
Is there some way to make .3ds file or .dwg file so that would really look like a 3d terrain in ACAD architecture or 3d max?
I am using AC3D 2014. I have created a surface from downloaded DEM points, but, as expected, the contours are not as accurate as I would like. They vary from known elevations anywhere from a few inches to several feet.
I also have survey data from approximately 500 points which include Northings, Eastings and Elevations. Is there a way to add these points to my existing contour surface and incorporate these know NEZ points such that he contour surface is more accurate?
I have already converted my "known point" file to a .txt format with comma delimited information.
I'm working on a topo survey and the contours are crossing each others (See attached pic) and what I did was edit the surface by adding points. I know that these points are fake, but how does this affect the terrain surface for design point of view? I did try swapping edge and deleting lines but makes it worse. Also as you can see in the pic, I don't see the added points like it did back C3D 2008.
View 5 Replies View RelatedI have a 1 mile road topo coming up for design purposes. The curb is standard, but there is full curb & depressed curb. If you had your way from the CAD seat, what shots do you prefer?
Most accurate I've seen iis Centerline, Edge Pavement/Edge Concrete Gutter, Flowline Gutter, Face Curb, Back Curb. More fieldwork, but made a good product.
What I have seen is CL, EP, BC, then "let them just use a template" and several variations thereof.
I have never seen a good way to automatically offset from say BC only and handle depressed curb by field coding.
I have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.
View 2 Replies View RelatedI have checked my data folder and I cannot find the file Surface-7.dwg used in a surfaces tutorial. It's a multi-view block. I checked my entire hard drive and it is not there. Can the files be downloaded? I can't seem to find where I can do this.
As a matter of fact, the location where the tutuorials say to look, Windows 7: C:ProgramDataAutodesk AutoCAD Civil 3D2012enuData, does not exist on this Windows 7 Home Premium computer I am using.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
I have a rather large project for a roadway reconstruction. Therefore, the existing utilities are in a separate drawing and the existing ground surface model is in a separate drawing. All the above surface items (curb and gutter, asphalt, concrete, signs, sidewalks, landscaping, etc..) are in the master drawing. I then xref'd in my utility drawing and though I would use data shortcuts for my existing ground surface drawing. I took the surveyed triangles (3d faces) from our raw survey drawing and copied them into my surface drawing, created a surface from the triangles, created a boundary and such. So far everything is good. I created the working folder for the data shortcuts for this project and saved the drawing and closed it. I went into my master drawing and clicked on "Create Reference". I did not promote. The reference came though and everything is fine. Now I want to add contour labels in my surface drawing which I did but they do not show up in my master drawing but the contours themselves do. Do I have to promote this drawing into my master drawing so I can create the contour labels in my master drawing? I guess that is fine but the issue is we have small areas of topo that will be added as needed down the road. If I promote the surface drawing into my master drawing then when I add topo to the surface drawing, it wont update in my master drawing.
View 9 Replies View Relatedmy colleague that is on holidays right now sent some civil 3d drawings that contain data references to another office and they are having broken reference issues with the surfaces. I opened the drawing in our office and the surfaces are there and showing the data ref symbols in prospector but when i look through the data shortcuts folder below in prospector the surfaces are not there.
how do i locate the .xml files or if they have been deleted how do these surfaces appear in my drawing.
I created some about 20 cross sections for a creek we topo'd and then went to work making the topo itself look presentable. After I was all done with that I noticed my cross sections had lost the surface data and were now just an empty grid.
When I go to edit a cross section's properties in the elevation tab the "Automatic" choice has a minimum and maximum elevation of 0. When I use one of those existing sample lines to create a single cross section the same thing happens, it's not picking up data from the surface. However, when I made a new sample line along the existing alignment it picked up the elevations and created a cross section just fine.
Is there anything I can do besides recreating all the sample lines and cross sections? I'm looking for any other way because I have already labled and put in some extra work on the cross sections and I'm hoping to be able to just recreate what I already did and drop them so it will match the linework I already did.
Is it possible to data shortcut a surface from c3d2013 into c3d2012?
I tryed it and it says that the surface is in the drawing but its not showing up.
I've tried changing the style and the layer but nothing works.
When adding data to a surface, there is the option to add it as a "Non-destructive" breakline. [URL] .....
What is this good for? I created a surface, copied it, and created a volume surface between the two of them. As expected, the resultant volume was 0.
I then draw a 3d polyline and snapped to elevations on the surface. I then took that 3d polyline and moved it up 5'. I then added that breakline to the surface as a "Non-destructive" breakline and the resultant volume between the original surface and the one modified with the new breakline was still 0. Absolutely no change was made to the actual surface, it just added additional triangles.
I'm trying to find a reason it's even option and I'm coming up blank. There has to be SOME reason it's there.
how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedI have received some sedimentary data of a seabed. I also have other geological layers the sit beneath (all in XYZ format). I have created point clouds using this data and would like to create a surface in order to use the elevational banding to represent thickness. Here lies the problem.
When creating a surface from the point cloud (whole extent), C3D seems to fill in gaps in the data. Is there a way that C3D can create a true representation without all the lines joining parts up? I know that I can edit the surface by deleting lines but this is very time consuming and I'm wondering if there is an easier way to do this. This problem isn't exclusive to point clouds either, as it does the same when adding points to a new surface.
I have attached a couple of screenshots. The first shows a Point Cloud with colours showing the desired effect. Unfortunately C3D doesn't allow me to print this. The second image shows how the surface looks when created.