We are going to be using autodesk vault and it is my understanding that vault searches the iproperties defined in inventor documents. Is there a preferred way to set up the iproperties in the part, assy and drawing environments.
If I do a search in vault and the iproperty is only defined in the drawing, the main search results will only give me the drawing(s) and I will have to show dependencies to find the associated model or assy, right. If I define the iproperty in the part, model and drawing I will have to fill in the value of the iproperty possibly in three places. If filling in the value in three places is preferred is there an easier way to fill out the values.
Any way to use iLogic to create custom iProperties from the cells in an Excel spreadsheet (both text and numbers) for a .dwg template. The only thing even close has been a user who already knew how to do it and was having a different problem. I am using Inventor 2012 and Excel 2003 and have very little experience with VB. I currently have a family of assemblies, consisting of two parts linked to an Excel spreadsheet to control the various parameters for each variation of the assembly.
I need creating an iLogic rule that will:
Go to a specific tab (I have four different tabs/worksheets) in an Excel spreadsheet.
Make a specfic row of that worksheet the current row based on the part number used to generate the models of the assembly shown in a .dwg.
Use the contents of a cell in that row (text or numeric or a combination of both) to generate a custom iProperty for the .dwg template.
Use the custom iProperties to fill in the title block of the template.
Is there a way, in my drawing template, to set one field as "Part Number iProperty from parent assembly on sheet 1 base view"? I want every single sheet in my .idw to reference the same "Part Number" iProperty from the assembly in the base view of sheet 1.
I have a form that is loading automatically in my part model. where i write the part number, description, project and custom titles.
my questions are:
1 - when i write the part number i would like then when i click apply it opens the save box with the same part number. 2 - it's possible to check-in the file during the saving and keeping the file checkout? 3 - i would like that some of the properties would be transfer to the drawing, like the description and the project (this two are from the part properties. 4 - transfer also for the drawing the custom titles to the custom i properties of the drawing as pre fill in.
I like to keep the properties of my drawing the same as those of my model. Currently I must remember to hit the "updat copied properties" button in the drawing to discard any old drawing properties and replace them with the properties from the model.
Is there any way to automate this task (perhaps on saving the drawing?) I presume an iLogic rule could be created in the drawing template, just not sure how to go about it.
I'm trying to put a little iLogic rule in my drawing template which triggers as soon as the drawing is opened. The rule asks the user whether the component he's making a drawing of needs to be painted or not. If it gets painted, the paint area (one side only or both sides) needs to be calculated. The result of this is then referenced by a text note in the title block.
I can do the radio boxes with the questions, as well as their If loops, but only when I'm in the model. Due to our, admittedly inefficient workflow, we never have time to specify "minor details" like paint area or spec during modelling, only when we get to drawing level. I'd like to put the iLogic rule inside the drawing template. I'm having trouble referencing the iProperties of the model from within the drawing's iLogic interface.
What I have so far is this rule, which I can run inside the model:
'set dummy variable equal to total areatotal_area = iProperties.Area'start radio box with questionsText1 = InputRadioBox("Will this component be painted?", "Yes", "No", Text1, Title := iProperties.Value("Project", "Description"))If Text1 = True ThenText2 = InputRadioBox("How many sides will be painted?", "Both sides", "One side only", Text2, Title := iProperties.Value("Project", "Description"))If Text2 = True TheniProperties.Value("Custom", "Paint Area") = total_areaElseIf Text2 = False TheniProperties.Value("Custom", "Paint Area") = total_area/2End IfElseIf Text1 = False TheniProperties.Value("Custom", "Paint Area") = 0End If
adding a line or two so that I can run the same rule, but from the drawing.
I'm trying to do this with iLogic, and i'm not getting anywhere. What I need, is to be able get to the iProperties of an associated model that is referenced into a drawing file. I want to make it easier to update the iProperties from the drawing file, without having to open the model file.
Factory Design Suite Ultimate 2012 AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
I was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
I'm using Inventor 2011 and when I go to change parameters using iLogic in an assembly model, (sometimes it is a component suppression, other times it is an iPart component change) it won't update the associated drawing file. I need to go into the BOM on the drawing and renumber the balloons, or change something else in order for the custom iProperties to update in the drawing template. If I just change the iPart component, then the BOM doesn't need to update making the renumbering of balloons redundant.
I'm using iLogic to update all of the iProperties and component references, then reattach balloons. What I would like to do is automatically update the custom iProperties drawing template fields, and renumber the drawing BOM.
When editing the Title Box in a Drawing Template and attempting to insert a LOGO (bmp file) the logo file justs show an icon for the Logo and not the Logo
On my company's default drawing template, I have a text block on there with some drawing notes. We often edit some of the notes on the end at each drawing so I didn't create it on the "title block" layer, rather it's on the "top" layer. I also added (in the template) a revision table with Rev. A being "Released for Production" (because we are weird). How can I constrain those on the sheet so when I change sheet size, they stay in the same position relative to the corners of the sheet?
i use Inventor 2012 and Vault Collaboration 2012, and I often find drawing template cannot be open. with error message The template file is open. Please close it and try again
i am having a BOM template for the parametric modelling i have created using the excel sheet input link.
when i create the drawing from the model the default Bom part list is coming, instead of that i need to get the Excel Bom Template i have created based on the input excel link.
I made iLogic for assembly and drawing, now i want to update drawing template parameters thru ilogic, as i already linked Fx(parameters) & iProperties to Template, but for updating template i need to close file and open again that file,
currently m using this method.
What is the solution for updating drawing template (like Model Description, Drawing no.).
Is there a way to have a part, which is a part of a larger assembly, get the title, subject, etc. from its parent assembly? I have my template set to use the "Title" property in my title block but I'd like each individual part drawing to pull that "title" from the assembly, not from the part itself.
I have updated our Company TB and Border and was now working with the Line weights of our layers. I placed our TB into the directory so when we do File -> New, we can select our TB. My problem is when I open it up, I get an error dialog box about a Conflict Styles (error shown below). Where exactly do I save our Library styles so that when I open up our TB, my pre-selected lineweights, layers, etc... load up?
I customer sent me a drawing template I need to use to submit a drawing to them. It is a ProE template which has a file extension of .frm.1 How to open this file extension and use it using either Autodesk Inventor or AutoCad?
I created a drawing template, saved on companies common drive, not local. When I created it I also created BOM to be filtered for certain iproperties. When I go "new" and open a new drawing file from the template I get the message about the style conflict and when open BOM in a new drawing I get default columns not the columns I set up in iproperties.
What is the process of setting up/changing styles?
I'm trying to automate the drawing-creation in our company. Steps I've taken:
- create new drawingdocument with template - Save new drawingdocument
Problem: Creation of new document works, but the next step, saving it to a specific location, fails. Error handler is initiated and displays error: Invalid procedure call or argument.
Used
Dim DXF_DWG as DrawingDocument'Create new drawing based on templateSet DXF_DWG = ThisApplication.Documents.Add(DocumentTypeEnum.kDrawingDocumentObject, ThisApplication.FileOptions.TemplatesPath & "Folded and Flatpattern DXF.dwg", True) 'Save new drawing to specific locationCall DXF_DWG.SaveAs("C:TempTest.dwg", False)
As told, the VB-code raises an error on the last command. What am I doing wrong? What are the correct steps in VBA to create a new drawing document based on a template and save the newly created drawing to a desired location?
Is there a way to pin or standardize where a revision table is located in a drawing?
I have a title-block set up and would like a revision table either embedded or populated upon command, just above my title-block. It would also need to extend upward with additional revisions...
