AutoCAD Inventor :: Dimension Resolution Limits
Mar 1, 2013
Is there any way to force IV to allow more than the 5 decimal place resolution that is listed in the Units drop down box?
And is there any way to force the result in the distance command to show all the decimals even if they are zeroes? When I specify 6 decimal places in the distance / measure command, I want to see 6 decimal places. If I don't, then I don't know if the rest of the digits are zeros or if it just didn't accept my choice to show 6 decimal places.
View 9 Replies
ADVERTISEMENT
Jul 6, 2013
I set a "limits" in my drawing(command "limits"-- "lower left corner is 0,0" --- upper right corner " is set as 20, 20--enter)
But then I moved my mouse horizontally and vertically on the screen, and found that the coordinate value at the bottom was from -25 on the left to 18 on the right, and from 0 at the bottom to 15 at the top. I am confused about what on earth does that limit? should it be 20 in length and 20 in width?
View 9 Replies
View Related
Jan 4, 2012
I have a question about limiting movements. In real life, when you close a door it stops as soon as it hit its frame. I want to do the same in Inventor.
View 3 Replies
View Related
Dec 29, 2009
i was attach parcaboyutu.exe program that show limits X Y and Z inventor parts(ipt)
View 6 Replies
View Related
Nov 2, 2011
Extrude command is great, no doubt. But, I wish it was possible to extrude bidirectional. One side to a specific value & the other side up-to-next.
Inventor Professional 2013
Vault Collaboration 2013
View 2 Replies
View Related
Apr 3, 2012
Trying to change the limits for a hole that is called out. Here is what happens when I try to edit the hole note.
[URL]
What the crap? Guess I can always just manually type it in..
View 2 Replies
View Related
Jun 23, 2011
I just got back a submittal package from a customer. Many markups because of incorrect dimension callout for a certain fit. When I dimensioned the drawing, I used the limit/fit calculator that is with Inventor. Now I just compared this calculator with the ANSI B4.1-1976 standard that it is supposed to follow. What I found was that the values in Inventor are wrong.
I just checked a few sizes and they do not match the ANSI standard. Not sure it there are other fits that have errors in them, but I will bet there are. Does Autodesk realize that if this information is put out, we have to take it as gospel. I don't have the time to check every-little-stinking dimension. If the dims in the table is wrong, I might as well type them in myself and forget about using the table.
Here is a screen shot of some of the errrors that I found. I also checked this size range for RC3, RC4 and RC5. They all have errors in them too. I am sure there are more, just dont have the time to check. We are not talking about "Freeware" here...
View 9 Replies
View Related
Nov 1, 2011
I have a linear slide assembly, for which I've set up limit constraints in the open and closed position.
It all works well, with one being able to drag the slide open and closed and the parts stopping in the correct positions.
I then inserted 4 of these assemblies as sub assemblies in a parent assembly.
I then constrain another part to the 4 slides.
I want to just drag on this part, to make the slides move to open positions.
This is to check kinematics etc.
One cant do this. You can only drag one slide open, by activating that slide in the model browser.
Any way to make limits work properly in upper assemblies?
View 2 Replies
View Related
Apr 24, 2012
How would I go about creating a rule in iLogic which would limit the minimum length of a pipe (parameter = Pipe_Length) to be half the outer diameter of the pipe (Pipe_OD), in other words "Pipe_Length ≥ Pipe_OD/2"
I know you can use the limits wizard in iLogic, but is that not only for numerical values as opposed to parameters?
View 2 Replies
View Related
May 28, 2013
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies
View Related
Feb 23, 2013
how to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies
View Related
Jun 27, 2011
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies
View Related
Jan 27, 2012
Is there a way to make the linear dimension a diameter dimension?
View 9 Replies
View Related
Dec 19, 2011
I create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
View 5 Replies
View Related
Jul 4, 2012
In VB i had:
Dim newLimits(0 To 3) As Double
newLimits(0) = x1 - (x2 - x1)
newLimits(1) = y1 - (y2 - y1)
newLimits(2) = x2 + (x2 - x1)
newLimits(3) = y2 + (y2 - y1)
AcadDoc.Limits = newLimits
Now i thougt this works in this way:
/// <summary> /// Testfunktion für Limits /// </summary> private static void Test() { var acDoc = Application.DocumentManager.MdiActiveDocument; var acDb = acDoc.Database; acDb.Limmin = new Point2d(10, 50); acDb.Limmax = new Point2d(10, 50); }
But this is not working
I get the following Error: eLockViolation
I think this is from the Transaction and OpenMode.ForWrite - but where do i get such a transaction and the database open for writing.
View 1 Replies
View Related
Oct 29, 2013
How to create a border around the limits I set using LIMMAX. Are the limits (after setting up previous steps) what is visible on the screen? I see the X,Y coordinates in the middle of my view finder. Can I set them using REC?
View 9 Replies
View Related
Mar 24, 2012
is it necessary to set limits before starting the drawing.What is the steps to do before we start drawing a floor plan.
View 7 Replies
View Related
Aug 1, 2013
I have an offset assembly and I have forced the skew of the second alignment. (Is a simple basic lane + a linkslopebetweenpoints and a markedpoint placed at the left extreme of a basic road assembly)
As you can see, there are errors at the area in which we have the greater angle between cross sections. What are the limits of this C3D feature ? Above more that "x" degrees of cross sections directions difference C3D are going to fail ?
View 2 Replies
View Related
Dec 4, 2013
My co-worker had a dialog box show up that said something about Size Limits for Legacy Drawings. It had two options. The top one said something about when zoomed out you won't see details but once zoomed in you will see them. The bottom option was someting about showing full detail at all zoom levels.
She chose the top one, but now she wants to choose the other. I can't seem to find a variable or even a mention of this dialog box anywhere. How I can switch from one to the other? Or how I can get the dialog box to pop up again?
I don't have the exactly language, so that is way I have been so vague.
Civil3D 2014
Windows 7 64 bit
View 2 Replies
View Related
Sep 7, 2012
How do you change the limits of a drawing in AutoCAD 2013? I have specified the limits for the bottom left and top right, yet it still isn't working. Is there something that I am forgetting or not doing right?
View 1 Replies
View Related
Sep 30, 2011
Has problem of layout limits such that he can't create more than 6 layouts, the 7th layout is automatically deleted. I know that we can create up to 255 layouts and sometimes more. Is there a variable settings that could have gone wrong inasmuch that the maximum layouts is now 6?
View 1 Replies
View Related
Sep 2, 2013
I am attempting to create a cm scale drawing in AutoCAD of an rc airplane with a 200 cm wingspan. Problem is, the drawing only goes out to about 125 cm to the right, an I cannot pan or zoom out any further. I can't seem to find an option anywhere to change this. An Internet search has indicated I should use the limits command from the command prompt to increase the drawing limits, but this has had no effect.
How do I go about increasing the drawing limits?
View 4 Replies
View Related
Jun 26, 2012
When I open Autocad, Each time I have to manage units, grids,limits....... how can i get rid of this???? I dont want to set each time same things when i open autocad .....
View 8 Replies
View Related
Feb 18, 2013
We just installed Inventor R2013. When opening drawings in R2013, the drawing resolution when one is zoomed to the extends of the drawing is very poor. If one were to open the same drawing in R2011 & R2013 and compare the two then one would see that the resolution is better in R2011. Is there a setting somewhere in R2013 to make the drawing resolution better?
View 5 Replies
View Related
Mar 29, 2013
How do you clean up areas where the section view is outside the viewport limits. C3d should have moved the top section to the next sheet becuase it didn't fit. How do you tell it this? An automatic toggle somewhere?
View 4 Replies
View Related
Oct 17, 2006
is there any point when you set up a new drawing in setting the drawing limits.
For example I am about to draw up a house plan at scale 1:100 which will be plotted on an A3 sheet. I envisage the floor plans will be on one A3 and the Elevations will be on another A3 sheet. Sections will go on another A3. I will have approx 6 paper sheets set up for this.
I plan to draw the whole lot in model space. Then move it around in paper space so each item is on a seperate sheet.
Is this the correct way to do it. If it is, then what is the point of having drawing limits in Model space? The books I have, say it is good drafting practice to set up limits. But I can't see why Also what is the point of setting up the grid display when half the time you draw right off the grid?
View 9 Replies
View Related
May 13, 2013
I have one little question. Do you know how can I cut the limits of one surface which I made from DEM file (asc)?
The surface that I made is 15x15 km2; but I only need, for example, 6x15 km2: I want to erase the east of the surface.
View 1 Replies
View Related
Apr 16, 2013
We have created a complex Inventor drawing (Inventor 2013) of a very large plant item which we need to print at about 2AO to put up on a wall for training use. We want to create a high resolution PDF file of the drawing first and then print the PDF having checked the quality and resolution in Acrobat Reader.
We have tried exporting to PDF but we found that the colour shaded fills, behind the lines, are too compressed and the resolution very poor. We tried increasing the paper size but this did not work.We have tried creating a plot file by printing to file using the driver of a large roll feed plotter and then creating a PDF from the resulting file. This was a little more successful but still a long way short of the resolution or line quality we require. When you zoom in the curved lines are very jagged and the colour fill still not good.
We tried printing to a generic Postscript driver but this was even worse as we didn't have enough control over paper size or resolution.
View 5 Replies
View Related
Feb 28, 2003
When I insert a image into a sketch what resolution does Inventor use?
View 4 Replies
View Related
May 15, 2013
from In2012, I manged some how to put a .bmp picture in the color style.But as you see, it's not good, no good focus neither the piccture continue from the start to the ene, you see lines cutting the picture.
And when I use a color style that already exist in inventor, it looks so good.The picture that I used is attached ( named 1) I will use a better pic.I want my drawings looks almost like my actuale product.
View 2 Replies
View Related
Jan 11, 2006
I would like to write a routine to resize the MText limits box to the minimum size required to cover the text, for background masking purposes. From the DXF codes, I see that I can simply set code 41 to match code 42 in order to set the width. However, I cannot seem to figure out how the vertical dimension is defined. (entget) shows no change in the DXF codes after I resize the mtext box.
I do know how to figure out the height that I need, using (acet-geom-textbox), but I can't seem to figure out how to apply this height the MText entity.
View 9 Replies
View Related