I have one little question. Do you know how can I cut the limits of one surface which I made from DEM file (asc)?
The surface that I made is 15x15 km2; but I only need, for example, 6x15 km2: I want to erase the east of the surface.
I have a proposed surface that has been made by selection polyline with a z elevation as contours. Is it possible to have civil 3d easily change the weeding and supplementing factors to a tighter value after it has already been made?
View 1 Replies View RelatedAre there limits on how long time laps films made in PS6 can be?
I'm trying to create a time laps but PS6 does not include all the images in sequence 0001 to 1360? It simply creates a movie in 27 seconds and cuts out the 400 latest pictures!
I have a file where there are mostly surfaces and gradings. But once again i ran into a similar problem - i cannot open the file anymore. It just stops loading and then Civil crashes.
Can try to open it and maybe use MAPCLEAN or AUDIT in hope it fixes anything?
Why do these things even keep happening, i do not understand at all.
I uploaded the file to [URL]
I want to loft the surface, made of polylines.The problem is that, when I select all the splines, and then do Draw-> Modeling -> Loft then I chose the "Cross-section only", this what kind of message I get in command box:
The selected entities are not valid.
Here the .dwg file with the mentioned splines in it:
[URL]
I have an offset assembly and I have forced the skew of the second alignment. (Is a simple basic lane + a linkslopebetweenpoints and a markedpoint placed at the left extreme of a basic road assembly)
As you can see, there are errors at the area in which we have the greater angle between cross sections. What are the limits of this C3D feature ? Above more that "x" degrees of cross sections directions difference C3D are going to fail ?
My co-worker had a dialog box show up that said something about Size Limits for Legacy Drawings. It had two options. The top one said something about when zoomed out you won't see details but once zoomed in you will see them. The bottom option was someting about showing full detail at all zoom levels.
She chose the top one, but now she wants to choose the other. I can't seem to find a variable or even a mention of this dialog box anywhere. How I can switch from one to the other? Or how I can get the dialog box to pop up again?
I don't have the exactly language, so that is way I have been so vague.
Civil3D 2014
Windows 7 64 bit
How do you clean up areas where the section view is outside the viewport limits. C3d should have moved the top section to the next sheet becuase it didn't fit. How do you tell it this? An automatic toggle somewhere?
View 4 Replies View RelatedHow to best smooth a surface created from a DEM file? Contours produced from the surface, particularly in the flatter areas seem to be following the triangles, so you can see the rectangular nature of the grid.
I've attached a screenshot with the contours shown. Up to this point when creating the surface, all I did was add a data clip boundary, then add the DEM file (manually within the surface definition, not using the "create surface from DEM" feature). I had tried some of the options under surface edits & smoothing, natural neighbor interpolation, but the results were still all wonky.
I´m having problem with creating stl file from surface. I need to import stl in another program for rockfalls.
I have create surface from contours, then extract faces, extrude them, union and I got solid..
I have export solid like stl file... But in another program my surface is not smooth, like somethning went wrong while exporting stl, because in autocad civil 3D 2012 everything looks good.
I have found out how I can increase facetres to 10, but It has not affect to my stl file. If there is some another parameter for better resolution of stl files?
I tried usign the xml export and import it on the other file, the surface comes in fine but the break lines do not come in.
View 5 Replies View RelatedI have been provided survey data in the form of an XML file that I am using to build a surface. Everything is fine, except for the drawing with the surface is still referencing the XML file. What is the best method to remove this reference and have the surface fully contained in one file? Using C3D 2012.
View 2 Replies View RelatedAre there any official document describe the limits in a DWG file? For example, the maximum number of blocks that can be added, the maximum number of layers, the maximum length of an object name, etc.?
View 2 Replies View RelatedI have downloaded ArcGrid (ADF) files from the USGS and am trying to define a TIN surface in Civil 3D with those files. I have done this in the past without difficulty but now I get a fatal error and the system crashes in the middle of the process. The ADF files are large, approximately 465 meg, and cover an entire USGS quad area. Is there any tricks or sollutions that would allow me to use this data source to create surfaces without my system crashing?
The system I am using is a Dell Intel Xeon CPU, W365@3.20GHz with 24 GB RAM, 64 Bit OS.
I think this should be an easy thing to do, but I am having problems figuring it out. I need to repath the location of a point file being used in a surface. My surface will not rebuild because it can't find the point file originally used. Drawing was used on a different computer system, so the point file directory is now pointed to the wrong path.
View 7 Replies View Relatedmy colleague that is on holidays right now sent some civil 3d drawings that contain data references to another office and they are having broken reference issues with the surfaces. I opened the drawing in our office and the surfaces are there and showing the data ref symbols in prospector but when i look through the data shortcuts folder below in prospector the surfaces are not there.
how do i locate the .xml files or if they have been deleted how do these surfaces appear in my drawing.
I am trying to edit the elevation of a JPEG image I have brought into my C3D 2010 file as an xref - I essentially want to 'drape' the image over the existing ground surface I have created to use for presentation purposes i.e. to show how our road layout is predominantly located along the ridge lines of the site.
Typically for other file types I would perform the following steps (using the classic toolbar): Grading > Edit Feature Line Elevations > Elevations from Surface > Select the existing ground surface > select object.
I don't seem to have the ability to select my jpeg xref using this approach... how else can I perform this task?
I can only change the layer color.
But I can't change the cross simbol, its drwaing scale.
Also cant view the point number,....
Maybe I cant view or set these properties when points were added using "Point Files" option.??
Civil 3D (2013)
I have a bunch (hundreds, so manual input not an option) of X,Y points without elevation data that I would like to import into a DWG and assign an elevation that is based on an existing surface object. Is there a way to do this for a point file? The command for inserting individual points would be the "Create points - Surface > Random" but I don't see a way to do this in a batch type method where i have my PNE formatted input file to just move the points to sit on the existing surface.
View 2 Replies View RelatedIt appears the PSE Editor does not display .PSB files. Is that correct? What are the file size limitations?
View 1 Replies View RelatedI often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline. This seemed to work, but when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies View RelatedMy problem added with pic ... I want to make volume calculate for sample road project. When I try to compute materials I cant use Corridor surface for DATUM... There is only target surface on option..
View 2 Replies View Related