AutoCAD Inventor :: Constraint Limits Don't Work In Upper Assembly
Nov 1, 2011
I have a linear slide assembly, for which I've set up limit constraints in the open and closed position.
It all works well, with one being able to drag the slide open and closed and the parts stopping in the correct positions.
I then inserted 4 of these assemblies as sub assemblies in a parent assembly.
I then constrain another part to the 4 slides.
I want to just drag on this part, to make the slides move to open positions.
This is to check kinematics etc.
One cant do this. You can only drag one slide open, by activating that slide in the model browser.
Any way to make limits work properly in upper assemblies?
View 2 Replies
ADVERTISEMENT
Dec 29, 2011
This is probably a simple one that I am missing, but how do I get a parallel constraint applied to these two edges.
View 4 Replies
View Related
May 16, 2013
My need is to assembly parts into an assembly by a known position in the assembly. The part has a UCS and I create UCS on the assembly programatically. What I cannot do is to constrain the two UCS. I tried this (Inventor 2013 x64 on W7/W8 64, c++ 2010 by the way DEBUG mode is not working from the IDE):
CAssemblyComponentDefinition compDef = doc.get_ComponentDefinition();
// MOdules UCS
CUserCoordinateSystems coords = compDef.get_UserCoordinateSystems();
CTransientGeometry geom = m_InventorApp.get_TransientGeometry();
CMatrix matrix = geom.CreateMatrix();
[code]...
View 3 Replies
View Related
Jun 24, 2013
I have an assembly wherein one part is mated to another grounded part, with a face-to-face coincident mate. The click + drag type of movement appears to move the part, while continually solving this constraint.
However, it seems like there is no way to do a rotation in the same manner, where the constraint is continually updated. There appears to only be the "Free Rotate" command, which ignores the constraints.
Is there really no way to do this in Inventor? The application is that I am laying out a mold for many, many small parts, and I am trying to move and rotate them into position to get good packing efficiency and density. Each part will be attached to a mold base with one of the aforementioned face-to-face constraints, then slid & rotated around manually.
This seems like a really important piece of functionality. Solidworks can certainly do this, do a part rotation in an assembly, while solving for existing constraints.
View 8 Replies
View Related
Mar 24, 2013
I am using Autodesk Inventor Professional 2013.
Motor Model 1:1 is used to turn the wheel holders at various angles. The part named "front gear spring holder" is supposed to revolve and turn the inner part of the "front wheel holder" My problem is that I want to simulate the turning of the front wheel's using contact sets or 3d/2d contact sets in the dynamic simulation environment. I do not know how to do this, but I'm almost certain the program is capable of doing so. Also the spinning of the front wheels must be able to be done along with various angles of the front wheels(while turning, the front wheels must be able to still spin with the front gear spring holder".
I have seen threads and articles that say that making gears with contact sets is not recommended or possible but i have two instances here where they work perfectly fine using the dynamic simulation with 3d /contact sets. Take a look at the simulation I have saved as well.
I will need more on this assembly in the future, including how to create bevel gears that work at 90 degree angles or spur gears with contact sets instead of just simulating their movements .
View 9 Replies
View Related
May 14, 2013
I am trying to add an angle constraint to an assembly of a ladder design. I need for the ladder to be able to be set at an angle against a wall and not vertical. The ladder design is such that the base brackets are fixed to the ground and the rest of the ladder may move about the axis of the bolted connection at the base of the ladder. I cannot get the angle constraint on the ladder to allow this.
Inventor 2013 Release 2013 SP2
Product Design Suite Ultimate 2013 64-Bit Edition
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 4 Replies
View Related
Sep 30, 2013
How could I center the suppressed constraint? I woul like to selecet it in the listbox.
Private Sub CommandButton1_Click()
Dim oAssDoc As AssemblyDocument
Set oAssDoc = ThisApplication.ActiveDocument
Dim oConstraint As AssemblyConstraint
For Each oConstraint In oAssDoc.ComponentDefinition.Constraints
If oConstraint.HealthStatus = kSuppressedHealth Then
Call ListBox1.AddItem(oConstraint.Name)
End If
Next oConstraint
End Sub
View 7 Replies
View Related
Jun 14, 2012
Whenever I am using mirror command in assly . The mirrored part do not get constraint again I have to use the constraint or I have to make that part grounded.
View 4 Replies
View Related
Apr 25, 2013
This is noce Made sub assembly everything is good to go. Put in main assembly and flip..
Yeah lets not fixs bugs...
Sub Assembly
Insert in Main Assembly
Nice.. And no i have not constrained it to the main just put it in...
View 1 Replies
View Related
Jan 5, 2013
I got a problem with editing angle constraint in assemblies. I tried edit property of constraint but it didn't move model. Simply changing Angle attribute of constraint item don't work.
Only way I achieved movemenet is
if(oOccurrence.Constraints[i].Name.Equals(name))
{
AngleConstraint a = (AngleConstraint)oOccurrence.Constraints[i];
Object oEntity1 = a.EntityOne;
Object oEntity2 = a.EntityTwo;
String sVal = "" + angle + " deg";
[Code]...
but this is really slow, as much as changing throught parameter:
if (assemblyDoc.ComponentDefinition.Parameters[i].Name == "d655")
{
Inventor.Parameter invParam = assemblyDoc.ComponentDefinition.Parameters[i];
invParam.Value = Math.PI * angle/180;
inventorApplication.ActiveDocument.Update();
}
View 1 Replies
View Related
Mar 30, 2012
I have an assembly that is nearly completed. I am trying to change the lengths of two side rails (arrow pointing to one of them). On each end of these rails are several components that have been constrained to the rails.
When I change the length of the rails, many of the constraints show errors. I expected that all components would move with the ends of the rails as they are shortened since that is where they were constrained, but this has not happened.
The constraint recovery tool has not been useful to me.
View 3 Replies
View Related
Nov 24, 2011
I have an Assembly2 in Assembly1. I'd like to insert Assembly2 to Assembly 3 without losing any constraints or adaptive feature to Assembly1, while Assembly2 replaced with Assembly3.
Assembly1.iam
- Assembly2.iam
+ Part1
+ Part2
This is what I want:
Assembly1.iam
- Assembly3.iam
- Assembly2.iam
+ Part1
+ Part2
But Assembly2 shouldn't lose any constraints to Assembly1.
Software: Inventor Series 2011 SP1 x64
OS: Vista Business x64
CPU: E6400
RAM: 2*2Gb GeIL
VGA: Quadro FX 550
View 2 Replies
View Related
Jul 22, 2013
I have 4 different sub assemblies , each with a common part , I need to line up all these common parts in my main assembly.
View 5 Replies
View Related
Sep 17, 2011
How do I make multiple views (Front, Top, Side & Isometric) when driving an assembly constraint? I want to be able to show an assembly moving from different perspectives all at one time.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 6 Replies
View Related
Jan 18, 2012
I've got a relatively simple assembly (attached) containing 3 iparts. I change the center component the assembly and I lose all the constraints. Only the length changes, I'm sure I did this before but yet it turns out to be an epic disaster.
View 1 Replies
View Related
May 28, 2013
Given the list of AssemblyConstraints how do I list them textually? For example
// error checking removed for brevityCComPtr<AssemblyConstraints> pConstraintList;pAssDef->get_Constraints(&pConstraintList) ; _tprintf_s (_T("The assembly has %d constraints
"),pConstraintList->Count);const int ikNum = pConstraintList->Count ;for (int iConstraint = 0 ; iConstraint < ikNum ; i++) { CComPtr<AssemblyConstraint> pConstraint; hr = pConstraintList->...
what to put here? how to print out more data here...? }How do I get each constraint from the list?
View 3 Replies
View Related
Oct 1, 2013
If I have two parts as occurrences in an assembly, how can I programatically constraint two workplanes (one from each part) to a flush constraint.
My problem is that I can get the Occurrences, say ...
CComPtr<ComponentOccurrence> pTube1Occ = ...
CComPtr<ComponentOccurrence> pTube2Occ = ...
...but I don't know how to delve into these two pointers to get hold of two named workplanes within them. I'd then pass the two workplanes (somehow?!) to the AddFlushConstraint function.
get_SurfaceBodies doesn't seem right and neither does get_SubOccurrences.
View 9 Replies
View Related
Jun 17, 2011
When I record an animation in .avi using the Drive Constraint command here's what pops :
-The codec you selected to compress this AVI video stream cannot handle the current screen color depth and/or the graphics frame size. Please try another codec.
-Then I press OK and it records but the AVI file is empty and no video is watchable.
What can I do?
I'm using Autodesk Inventor 2012 ans a windows 7 64bit brand new computer with Nvidia graphic card.
View 6 Replies
View Related
Aug 5, 2013
On AssemblyConstraints what is the difference between EntityOne(Two) and GeometryOne(Two). When should one be used over the other?
Likewise with AffectedOccurrenceOne(Two) and OccurrenceOne(Two).
View 2 Replies
View Related
Aug 31, 2012
I would like to determine the Proxy ObjectType returned from Constraint.EntityOne (i.e. If oConst.EntityOne = kWorkPointProxyObject Then ....)
Property EntityOne() As IDispatch**
how IDispatch works.
Dim oAsmDef As AssemblyComponentDefinitionSet oAsmDef = oAsmDoc.ComponentDefinition
Dim oConst As AssemblyConstraint
For Each oConst In oAsmDef.Constraints'Below will print the Enum 67120288 (kEdgeProxyObject) or 67119520 (kFaceProxyObject) if
'it is constrained. It will Err if a Work or Sketch Proxy Object is Constrained Debug.Print oConst.EntityOne Debug.Print oConst.EntityTwo Next
View 2 Replies
View Related
Aug 26, 2013
Why can't Inventor constrain an ellipsoidal contour with a line? We have pressure cylinders which uses a 2:1 ellipse. These cylinder get welded to a base stand fixture. The surface of the ellipse nestles in between contact points of the base stand, in this case lines of geometry. Yet Inventor can't constrain them as such. Any good workflow (at the assembly level) so that we don't have to ground components and use the Analyze Interference tool to make sure we are right on the surfaces? I don't understand why it will work for a cylindrical surface but not an elliptical surface.
View 7 Replies
View Related
Jul 6, 2013
I set a "limits" in my drawing(command "limits"-- "lower left corner is 0,0" --- upper right corner " is set as 20, 20--enter)
But then I moved my mouse horizontally and vertically on the screen, and found that the coordinate value at the bottom was from -25 on the left to 18 on the right, and from 0 at the bottom to 15 at the top. I am confused about what on earth does that limit? should it be 20 in length and 20 in width?
View 9 Replies
View Related
Jul 30, 2012
I am designing a vertical axis wind turbine just for some practice (just started using Inventor) and everything was going smoothly until I tried to "animate" it spinning. First, I set up a work plane that goes through the center of the structure, and then I clicked angle constraint "explicit reference vector." After watching several youtube videos, I figured that I should click on the work plane, click on another reference point, and then click another point that would be orthogonal to those two (right?). Well after I choose the first point, Inventor will only allow me to choose the center axis as the second option (which I think should be the third option).
View 6 Replies
View Related
Jan 9, 2012
I have a part file with work plane on it (visibility option is checked). When I put it on assembly file, the work plane is disappeared.The part file is on attachment.
View 3 Replies
View Related
Aug 13, 2013
I'm trying to setup an assembly based on a complex 3D sketch. In simplest terms, if I have a sketch for the perimeter of a house, I'd like to add instances of a 2x4.ipt at specified locations automatically. That's not necessarily every 16", but rather wherever I put a specific geometry. I'm imagining two work axis or sketch lines, one along the perimeter to determine the location of the 2x4 and one perpendicular to determine the direction the 2x4 points.
In actuality my sketch won't be a rectangle, but rather a complex 3D spline, that's why I'm hoping to get some sort of automated process. And the current design involves somewhere on the order of 1500-1800 2x4s. Making the sketches and geometry will be nightmarish enough, I'd prefer to be able to breeze through the assembly portion.
View 3 Replies
View Related
Jul 16, 2008
I have an assembly that was generated by Pro/E. It opens fine, but there are roughly 1000+ planes that are all visible. Is there a way to easily shut these all off whithout having to do it in each part?
View 4 Replies
View Related
Dec 26, 2013
Is there a way to work with parameters on a suppressed assembly using iLogic.Everything works fine, but when I suppressed a part ilogic rule give me an error: Parameter: The component named "xxxxx:1" was not found.
View 1 Replies
View Related
Jul 19, 2013
How to set the visibility of workplanes in an assembly file to false.?
View 3 Replies
View Related
Mar 19, 2012
I have a formed beam I would like to mirror in an assembly to avoid the work of forming the opposite bent part. I have mirrored it however the cuts in the lower side of the beam are mislocated as if the part were rolled over rather than mirrored.I am in Inventor 2012.
View 9 Replies
View Related
Feb 26, 2013
There are two cases, that should behave the same, but they don't.
First program works normally. Inventor generates a circular Pattern with the given Part.
' Part referenced in Obejct-Collection-Object
o_ObjectCollection (is defined)
' reference an Axis of the Assembly
[Code].....
Now, the second case, I try to take the Work Axis from a Part, that is placed in the Assembly,
but Inventor does not generate the Pattern. If I set the Axis visible, or even rename it, it works. But the AddCircularPattern does not work.
' Part referenced in Obejct-Collection-Object
o_ObjectCollection (is defined)
' reference an Axis from Part, placed in Assembly
[code]....
View 5 Replies
View Related
Feb 5, 2013
I have one large assembly for hose routing it consists of around 1000 hoses all hoses are coming in main assembly but delivery date is very short. My plan is work on same assembly 5 people how it works?
One idea is like working in sub assemblies but in my case only one assembly consist of all hoses.
How to work multiple users in single assembly file at same time. like in solid works enable collabarative mode.
View 2 Replies
View Related
