AutoCAD Inventor :: Custom Sheet Formats In Drawing Resources Without Using Blocks
Feb 14, 2013
I am attempting to create a series of drawing templates in Inventor 2013.
I have successfully created four unique Sheet Formats with Border, Title Blocks, Revision Table, and text populated by iProperties.
I have a bunch of text that I want to have inside a square on the first page of a series of drawings. I draw the square in sketch mode, Create Sheet Format, and the sketch ends up as a separate AutoCAD Block ("SheetTemplates_XXX_Sketch1") rather than in the Sheet Format. I can place the block on the new sheet, but it can be placed anywhere as the block floats.
View 1 Replies
ADVERTISEMENT
Sep 20, 2013
I have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
View 1 Replies
View Related
Mar 8, 2013
I'd like to be able to queue up a set of processes using Inventor's task scheduler. Ideally I'd be able to queue it, leave, and have it done in the morning.
The process is this:
1. Check Inventor dwg files out from vault
2. migrate files to 2013
3. Run drawing resource transfer wizard
4. Check files back in
5. Export all files to AutoCAD dwg format
How can I queue step 3 to run through task scheduler? DRTW is not an option in the task scheduler. I'll be giving it the same settings to use every time.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 9 Replies
View Related
Apr 13, 2012
I'm working on setting up some sheet formats for a few of our common drawing types. I'm running into an issue where even though I set them up with all the projected views having "Style from Base" checked, when the sheet is generated from the layout they don't carry that setting over.
The particular one I'm working on needs all the views shaded - as it currently works, both of the base views come in correct, but the two projected views are unshaded because this setting is being lost. The format is usable, but currently requires an additional step of turning "Style from Base" back on, so it's not where I want it to be.
If I use one of the Autodesk-created sheet formats from the "standard.idw" template, they all seem to work, yet any I create don't. Am I missing something, or does this just not work?
Inventor 2010, SP1
Inventor 2013
Windows 7 64 Bit
View 3 Replies
View Related
Mar 13, 2012
I also need to copy sheet formats and have it replace existing like it would with Titleblocks or Borders. All it does at the moment it create Copy of Titleblock. Here is the current code.
Function CopySheetFormat(SecretDrawingName As String, Titlename As String, ActiveDrawingDoc As DrawingDocument) As SheetFormat
Dim SecretDrawing As DrawingDocument
Dim I As Integer
'Find the number of Standard Resources in the Documents collection.
[code]....
View 1 Replies
View Related
Mar 1, 2012
I am having trouble getting a field in a multi leader which is part of a block to reference a sheet set custom property. I have fields within mtext in paper space that are not blocked that are referencing correctly but just not in my blocks.
View 9 Replies
View Related
Apr 16, 2012
I have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
View 1 Replies
View Related
Nov 22, 2013
is there a difference between <FLAT PATTERN LENGTH> <Sheet Metal Length> using them as custom sheet metal iProp? They seem both give correct output of flat sheet metal measures.
View 1 Replies
View Related
Aug 20, 2013
Im trying to get a sheet format to save and stay in the sheet format folder under drawing resources for every drawing i make. i've watched videos and read books and searched on here but just couldn't find the right fix.
i have made the title block, border, and sheet size. named them and saved them. while its open everything is where it should be, then if i open a new sheet it is not in the list of sheet formats to pick from .
View 4 Replies
View Related
Jan 15, 2013
I made a form that allows the user to enter in a custom sheet size. Using the API I am changing the Drawing Sheet Size Enumerator to the Custom Sheet size which allows the user to enter in custom values. That part is all working fine. My problem is that when a custom size is used in my title block it says that the size is "Custom Size (mm)". I know that the API uses cm for the sheet size units so I have the code convert the values into cm.
In the sheet settings window built into inventor it has the option for Custom Size (inches) and Custom Size (mm). How do I change whether it is inches or mm?
View 5 Replies
View Related
Apr 24, 2012
When I first upgraded to Inventor 2012 from Inventor 2010, I found that Inventor automatically created and populated three custom iProperties in the sheet metal environment. The props contained information for sheet metal style and sheet metal extents (width and length).
With a fresh installation, Inventor does not seem to be creating the custom props any more. Did I miss a setting or has the feature been discontinued already?
View 1 Replies
View Related
Dec 6, 2011
I am trying to make a custom flange to my sheet metal part. The flange tool only gives parallel flanges, but I would like my flange to be longer on one end than the other. Basically cut at the red lines.
I am using Inventor 2009 Suite.
ACAD 2010
ACADE 2008
AIS 2009
View 1 Replies
View Related
Jun 18, 2012
I'm having an error with Ilogic parameters.I just wanna change the border and the title blocks with Ilogic. This should be simple. Isn't this?
View 2 Replies
View Related
Jan 3, 2013
Is there a way to include custom sheet properties in the sheet list table?
AutoCAD Civil 3D 2012 (Primary),
Dell Percision T3500: MS Windows 7 64-bit SP1;
Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
View 4 Replies
View Related
Oct 29, 2012
I'm trying to set up a title block template that will be used between several different sheet sets. I have entered the custom properties, then when I go to the title block and try to insert the fields with current sheet set custom the drop down box is empty and then when I try to type in the custom property name the link still does not function. Is there some trick that I'm missing, or is this function broken on AutoCad 2013?
View 6 Replies
View Related
Oct 23, 2013
I have two part files: Part A and Part B. Part A contains a sketch block, Block A, which will be used as a basis for Part B.
I derive Part B from Part A using a "Derived Part" to bring in only the sketch block (Block A) from Part A. When I do this, Inventor sets every dimension in Block A to "Export" and creates a custom iProperty for it. Then the Custom iProperties list in both Part B and Part A is cluttered with every dimension from Block A.
Is there any way to prevent it from creating all of these custom iProperties?
Inventor 2013
View 2 Replies
View Related
Jul 5, 2013
In lightroom 4 I found a really useful tip where you can alter the file that controls how teh date format part of the import dialogue works - and more importantly it allows you to choose teh folder locations too, so when I import from another camera I can have the folder structure how I like.I know its there and it will just be a case of copying the file I made to the right location.
View 4 Replies
View Related
May 20, 2012
You can't copy a sheet within a drawing to duplicate it. So, as a workaround, I saved a copy of the drawing to a different name and tried to copy a sheet back. Pick the view in the browser, right click, copy. Switch to the original drawing, right click paste in the browser. All I keep getting is an error "Invalid input for Request." I even think I remember getting this error before and finding a way around it.
View 3 Replies
View Related
Apr 19, 2013
have 2 questions
1.) If you look at the attached screenshot in the Edit Sheet form there is a sheet "Revision" input field is it possible to fill this out via iLogic?
2.) We have some custom E size sheets (height always 34in width varies 5ft, 6ft, and 8ft) when we select on of these sheet sizes that we created it will display "Custom Size (inch)" when using the sheet property <sheet size> in the title block not the name of that we gave these sheets (Which creatively enough is "E-5ft", "E-6ft", and "E-8ft"). I thought I had this solved by doing this:
Dim oSheetSize As String
oSheetSize = ActiveSheet.Size
If oSheetSize = "Custom" Then
iProperties.Value("Custom", "SheetSize") = "E"
Else iProperties.Value("Custom", "SheetSize") = oSheetSize
End If
then change the titleblock sheet size field from sheet property <sheet size> to custom drawing properties <SheetSize> this all works great if there is only 1 sheet in the IDW where it fails is if there is more then one sheet.
View 2 Replies
View Related
Jul 13, 2013
I have a complex part and make a drawing. i want to make sections and details and to put some of them in another sheet in the same file. Also, can i put the hole table in another sheet?
View 1 Replies
View Related
Aug 25, 2012
how to change one of the entries in TranslatedStrings.txt in order to provide a different/custom destination folder naming scheme for importing.
This definitely worked in some previous versions (a while since I tried it) but in 4.1 it doesn't seem to work -- there is no such file in /Applications/Adobe Photoshop Lightroom 4.app/Contents or in the en.lproj subfolder (which seems to be where the non English TranslatedStrings.txt files live).
I won't go into why I need to do this, suffice to say if I can't do it, I'm going to face a tedious process of importing a load of stuff year by year and choosing the destination base folder manually for each year. Which is do-able, it's just a big pain.
View 1 Replies
View Related
Aug 8, 2012
Is there a way, using VBA to get the sheet size of a drawing without opening the drawing? I know how to get it with the drawing open, so alternatively, is there a way to open all the drawings in a folder, one at a time, then get sheet.size, then close and open the next?
View 3 Replies
View Related
Aug 31, 2013
I am using Inventor 2012 64 bit with Win 7.
We have a lot of drawing that has some extra sheet for ref. and Inventor let me exclude count and print from those extra sheet. This work fine but when we check-in the drawing to vault it update or publish all sheet to dwf. This is very compass for us because we full the dwf file from vault to release and the sheet count is different than the print out.
Is there a way to EXCLUDE those sheet when check-in or update dwf?
View 1 Replies
View Related
Apr 19, 2010
I am running inventor 2010 suite with service pack 2 and when I try to insert a JPEG or BMP into a Drawing Sheet (not a sketch on a part file), the image does not appear. I have done this on previous versions numerous times and it worked perfectly fine.
The message which appears on the screen says "TEMPEMBED.BMP" and it has a photoshop CS4 logo. When I do a print preview, nothing appears on the page. I have opened up a previous drawing sheet, which has a JPEG & BMP inserted and the image is shown, but when I try to insert another image on the same drawing sheet, the same thing happens.
I am running a pretty fast machine, with an intel i7 processor and a pretty hardcore graphic card.
View 7 Replies
View Related
May 7, 2012
I have setup all our Sheet Metal Rules to be all of our stocked in house sheet metals. The sheet metal rules are named like:
ALUM 5052 H32 1/2" (Part Number)
ST STEEL T304 3/8" (Part Number)
STEEL 44W 1/8" (Part Number)
etc.
And each rule has the proper thickness, material, and some standardized bend radius's. I've done this to introduce more uniformity in our designs, and to also allow the designer to put as much information into the model as possible, so that if someone else does the drawings, there is no question as to which material is used.
I now want to bring in the Sheet Metal Rule name into the drawing automatically. I can't seem to find a way to reference the Sheet Metal Rule directly from the drawing. What I need to do is pick a standard field in the i Properties (I used Stock Number), and put in =<Sheet Metal Rule> so that now the Stock Number references the Sheet Metal Rule, and then in the drawing I can just reference the Stock Number, and it will come in.
I don't like having to use the Stock Number as a middle man though, as none of our existing models are setup like this. Is it possible to reference Sheet Metal Rule in the drawing without having to use another field as a placeholder for the information?
View 7 Replies
View Related
Jun 14, 2012
I have 4 different sized drawing templates made, one each for A,B,C and D size. There are times when I start a drawing on a C size border/sheet and it gets too cluttered as I add views or annotations. Is there any way to insert/change the sheet size to the D sized template without starting over?
View 6 Replies
View Related
Sep 20, 2012
I have created a bunch of sheet metal rules for my different gauge thicknesses. Is there a way I can propogate the gauge information to my drawing so that if I were to change the gauge, that info would also update on my drawing sheet? The only thing I can get to work currently is to pull in the material used, but that doesn't include the gauge.
View 9 Replies
View Related
Jul 2, 2013
Just trying to add an existing symbol to a drawing sheet. I know i'm not formating the point correctly and i get a position error. How can i get the point location of two intersecting lines in my border to hard code the location?
Error:
Error on Line 18 : Argument not specified for parameter 'Position' of 'Public Function Add(SketchedSymbolDefinition As Object, Position As Inventor.Point2d, [Rotation As Double = 0.0], [Scale As Double = 1.0], [PromptStrings As Object]) As Inventor.SketchedSymbol'.
Error on Line 18 : End of statement expected.
DimoApp As Inventor.Application=ThisApplication
DimthisIDW As DrawingDocument=oApp.ActiveDocument
oSheet=thisIDW.ActiveSheet
DimoSymDef As SketchedSymbolDefinition
oSymDef=thisIDW.SketchedSymbolDefinitions.Item("APPROVAL STAMP")myPoint=ThisApplication.TransientGeometry.CreatePoint2d(1, 6)
oSheet.SketchedSymbols.Add(oSymDef) ,myPoint
View 3 Replies
View Related
May 14, 2013
What is the code to select a drawing sheet by either its number or description but NOT both together?
Sometimes want need to select the first sheet by number 1 but the sheet description can change. and Sometimes we will need to select the sheet by its description but the sheet number may vary.
View 7 Replies
View Related
Aug 22, 2012
Any way to make the drawing "sheet number", on which a "part" or "assembly" detail appears, show up in the "parts list"/"bom"?
I need to automate that information in order to prevent errors during revisions, and for company purposes.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 7 Replies
View Related
Jun 10, 2012
I have little question that, is it possible to change background colour of drawing sheet in inventor?
I have to change background colour white to black ( as in autocad) .
If it is possible pls where is setting in how to do it?.
View 3 Replies
View Related
