AutoCAD Inventor :: Characters In Datum Target
May 14, 2012Can more than 4 characters be used in the bottom of a datum target?
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Changing Default Datum ID On Datum Target From A To Z?
Dec 4, 2012We do not use "A" as our default datum ID.
Instead of manually changing this each time I place a Datum target can I change the default?
AutoCAD Inventor :: Datum Target Identifier
Jul 31, 2003Placing a Datum Target Identifier on a dwg. When your are in the Datum Target dialog box under Dimension, you have to type in a number indicating the diameter of the datum target circle. Normally you can't put in a diameter symbol before the number, but I just found out a way.
Make sure your Num Lock light is on. While holding down the ALT button on your keyboard, type in 0216 using the numeric keypad. This will put in a diameter symbol.
ALT 0216 diameter symbol
ALT 0176 Deg symbol
ALT 0177 Plus / Minus symbol
Another problem is, after placing the Datum Target you can't dimension to it. That can be solved by putting a sketch of a circle (phantom line) with it's diameter and locating dimensions on the dwg view. Then you can placing the Datum Target Identifier on the the circle.
A wish list to Autodesk:
Allow dimensioning to the symbol
Have a diameter symbol already in the dialog box
Have a option that sizes the datum circle diameter
AutoCAD Inventor :: Moving Datum In A Sketch
Jan 9, 2012in inv 2012, if I create a new part with adaptivity within an assembly the datum of the sketch ends up wherever, if I break links and remove the adaptivity, is it possible to move the absolute datum of the sketch to a decent position within the sketch?
View 9 Replies View RelatedAutoCAD Inventor :: Auto Project Datum Planes
Jul 13, 2012is there a way to auto project datum planes that are square to the sketch?
View 4 Replies View RelatedAutoCAD Inventor :: Super Long Datum Planes
Nov 19, 2012I have found after my last save, the Datum Planes of the assembly have just lengthened in two directions monstrously for no reason. I checked to see if it was an unassebled straggler but cant find anything. Is there a way of knowing why it does this.
Check attached image, the dot is a machine 20 metres high and the datum plane seems to reach the nearest neighbourhood for some reason.
AutoCAD Inventor :: Datum Identifier With Plunger Anchor Attachment
Jun 29, 2012I am being requested that I add a plunger/ anchor to the datum identifier within/ on a GD&T feature control frame (see attached). This is per ASME Y14.5M - 1994 and Autodesk IV states that it meets this spec. I also checked with a couple of 'reliable sources' and they also stated that it needs to be there. I was hoping that it was a personnel preference/ company standard type thing.
How to change the setting to add it within the control frame generator?
2012- all patches & SP's
AutoCAD Inventor :: How To Attach Datum Identifier Symbol To Bent Leader Of A Hole Or Diameter Callout
Apr 3, 2012Autodesk Inventor 2010 .idw - How do I attach a Datum Identifier symbol to the bent leader of a hole or diameter callout such that when the dimension is moved, the symbol will follow?
View 1 Replies View RelatedAutoCAD Inventor :: Addin Does Not Work When Changing Target Framework
Oct 24, 2012I changed the target framework for my project from .NET Framework 2.0 to 4.0, and also changed the Inventor.exe.config file to read
<supportedRuntime version="v4.0"/>
Now when I debug the ribbon tab that I am creating is nowhere to be found, but if i change back to 2.0 and debug, the ribbon tab is back.
AutoCAD Inventor :: Edit Point / Spotlight Target In Studio
Sep 26, 2011I'm trying to create a scene in IV Studio using point lights. If I want to change the position of the light's target, IV won't let me.
The option is simply not available. Not in the dialog (see attached image) an not in the graphics region (clicking the glyph's).
According to the help text, it should be possible (see attached image). The problem persist in both normal lighting styles as in local lights.
AutoCAD Inventor :: Export Sketch To DXF And Control Entity Target Layers
Mar 18, 2013Is there any way to export a sketch to DXF and control the target layer of sketch entities?
Solid Lines go to Layer=0
Construction Lines go to Layer=Construction
Center Lines go to Layer=Center
I am currently using
Sketch.DataIO.WriteDataToFile("DXF", strDXFOutputFile)
which send everything to layer=0
AutoCAD Inventor :: Customize Action Or Target Of Help Button In Dockable Window?
Sep 11, 2013Is there a way to customize the action or target of the help button in a dockable window?
View 4 Replies View RelatedAutoCAD Inventor :: Content Center Characters
Oct 13, 2012We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.
All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.
For CC items, we have added columns for these and mapped them to the appropriate iProperty.
Everything works great except for one thing.
Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol. For our normal library parts thhis is not an issue. However, CC items utilize these characters differently. The result is our descriptions come out different that what is entered.
See the example below...
How to include these characters in the CC descriptions?
Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
AutoCAD Inventor :: Removing Characters From IProperty
Jan 3, 2013I'd like to build a rule into my standard part template that takes the part number (which it automatically gets from the file name by default), removes the characters after a delimiter, as well as the delimiter itself, and sets that as a new custom property. For example, we'll call the custom property Prop1
For part 123-321-1.ipt
Inventor already sets part number iProperty to 123-321-1
I want to set Prop1 to 123-321
For part 123-321-25.ipt
Inventor already sets part number iProperty to 123-321-25
I want to set Prop1 to 123-321
AutoCAD Inventor :: Excel Linking / Special Characters?
Aug 30, 2013As everybody know copy/paste excel file into an inventor drawing is sometimes difficult. As you can see in the printscreen a special character is not converted. I supposed it's because this special character is not in the AIGDT or is in the extended character set wich is not considered in Inventor?
View 2 Replies View RelatedAutoCAD Inventor :: Parts List Dropping B Characters
Jan 4, 2012Why would the part list drop "B" characters?
View 1 Replies View RelatedAutoCAD Inventor :: Printer Properties Show Garbage Characters?
Nov 22, 2011This is on a Windows 7 work station
User reboots computer, logs into network, opens the printer properties on one of our HP plotters, and the print properties pages show just fine.
The user will open Inventor, and attempt to print a drawing, and the print settings page shows in all weird characters.
We have applied all service packs and hot fixes. How do we get this to show normal like it does on all the other programs?
AutoCAD Inventor :: ASCII Characters / Correct Character Codes
Feb 13, 2012I am quite conversant with Unicode keystrokes (Alt+XXXX) for most symbols in fact I have a cheat that aids me in the correct character code.If I don't have the code I just copy it from the character map and paste it into the sentence but it gets a little tiresome after a while searching the character map for symbols.
I have on numerous occasions lately had the need to to insert the 'THEREFORE' symbol (You know the 3 dots in a triangle) into text notes on my drawings.
This symbol only seems to have a code "U+2234"..I have spent a lot of time searching everywhere for a clue as to what this keystroke sequence means.
I have my font style set to "Arial Unicode MS". Looking for the correct keystroke sequence for "U+XXXX"?
AutoCAD Map 3D :: Datum Conversion Not Shown In WKT
Jun 28, 2012In our company we use several datums which come in multiple variants, e.g. Pulkovo, MInna and other West African ones. We frequently need to set up alternative datum shifts to comply with client requirements for exact positioning (Oil & Gas Industry). These are usually Molodensky or Bursa-Wolfe shifts.
I have done a fair amount of experimenting with the datum creation wizards, and within AutoCAD the shifts seem to work correctly, but I am puzzled that when one views the details of the Datum Transformation from the library, the transformation parameters are not shown as part of the WKT string. Also, presumeably consequently, when data from a drawing with a coordinate system based on this shift is exported to ESRI shapefile format, the transforamtion parametere are not shown in the .prj file.
I do not know whether I have missed a stage in the creation process, or if this this is a bug. It also seems odd that when viewing the details of a user-defined datum, there is no obvious clue as to what the transformation parameters are for that datum, other than finding a transformation with the same code name.
AutoCAD Map 3D :: Create New Datum Conversion?
May 15, 2012how to create a new datum conversion, but it has six parameters...It is a similarity transformation i want to put in a new configuration.
following data are:
centroid: x=453106; y=7076452
traslation in X=-179.2
traslation in Y=-386.302
scale in ppm= -832.154
ang in rad = 2.5*10^6
AutoCAD Civil 3D :: Create A New Datum Conversion?
May 15, 2012how to create a new datum conversion, but it has six parameters...It is a similarity transformation i want to put in a new configuration.
following data are:
centroid: x=453106; y=7076452
traslation in X=-179.2
traslation in Y=-386.302
scale in ppm= -832.154
ang in rad = 2.5*10^6
AutoCAD Civil 3D :: Datum In Compute Material
Oct 18, 2012“Datum” in the “compute material”,
I’m not sure about the correct choice for the “datum” to proceed in plotting “mass haul diagram”
What might be the proper selection for the “datum”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: Plot Profile Below Datum
Apr 14, 2012I have a profile view that shows two ditch profiles in it, for right and left ditch. They are similar in elevation, so they overlap some in the profile view. Is there a way to show one of them at a set interval below its actual datum, like say, 5'? Short of drawing in a dummy profile or expolding it - which I'm going to do shortly....
View 2 Replies View RelatedAutoCAD Civil 3D :: Can't Get Datum To Stop At Corridor Boundary
Dec 5, 2012I've set the corridor's surfaces to use the corridor boundariy & the datum's overhang correction to top links & bottom links, but for some reason it doesn't respect the corridor's boundary.
View 2 Replies View RelatedAutoCAD Civil 3D :: Corridor Datum To Follow Protruding Surfaces
Dec 4, 2013Am trying to create a corridor datum surface that goes around Protruding lanes but it seems I am Short on knowledge here. the outer lane, LaneOutSideSuper has a greater thickness than the inner lane (same sub assembly) and I would like my datum surface (actually, not only the datum surface but other layer surfaces) to attach its self around the bottom links of both surfaces but it shoots from the Crown_sub to the outer lane Datum.
I have used the bottom links overhang and adding feature lines to the surfaces but it doesn't seem to cut it. Attached is an illustration of the section view. The top figure is what I hope to get and below is what i seem to get.
AutoCAD Civil 3D :: Existing Elevation Labels At Datum And Top Grade Breaks?
Aug 28, 2012i created section view as in pic1. In Bands, Existing surface elevation labels at existing surface grade breaks, top of road elevation labels at top grade breaks, datum is the same. Can i add existing surface elevation labels at top of road grade breaks? (pic2)
View 7 Replies View RelatedAutoCAD Civil 3D :: Can't Use The Corridor Surface As DATUM Surface
Feb 7, 2013My problem added with pic ... I want to make volume calculate for sample road project. When I try to compute materials I cant use Corridor surface for DATUM... There is only target surface on option..
View 2 Replies View RelatedAutoCAD Civil 3D :: SAC Using Target Parameters
Dec 16, 2013I am building sub-assembly, I just want to know if there is any example or tutorial on how to add target parameters to sub-assemblies.
View 6 Replies View RelatedAutoCAD Civil 3D :: SAC Offset Target Is Valid
Sep 4, 2013I am using OffsetTaget.isValid in my subassembly.But i realize that when i put this formula it checks the whole drawing for that target and if the target polyline exist even a piece of polyline in the drawing then C3D considers it for all sample lines.Is ıt possible to be able to check each single sample line if it is going to intersect that target polyline or not?
Civil 3D 2014 x64
Windows 7 64-bit
16GB RAM
AutoCAD Civil 3D :: Link To Target Polyline?
Dec 5, 2013i have just spent 8 hours today trying to find a link that will vary target a poly line that i have set. i cant seem to find the link that will do what i need as per the attachemnt. the section between the edge of the foot path and the start of the fill/cut slope needs to be variable
i know how to set all the targets but this link seems to be a fixed length.
AutoCAD Civil 3D :: Corridor Target Assigning
Nov 21, 2013I want to programmatically assign Targets to subassembly of baseline Regions but I could not Success in that here it is the code
Corridor corridor = ts.GetObject(icor.ObjectId, OpenMode.ForWrite) as Corridor; foreach (Baseline b in corridor.Baselines) { al = ts.GetObject(b.AlignmentId, OpenMode.ForWrite) as Alignment; foreach (BaselineRegion br in b.BaselineRegions) { double st = [code]........