I'm running 2012, and once in a while while in an assembly, I can no longer select the part in the display (alike to selecting the part in the browser) and instead can only select faces of parts. I think I might be hitting something when I right click, though I'm unsure. How to reverse it?
View 1 RepliesThis has happened since I updated to 2012 Professional. When I want to use the measure tool or add constrains in assembly mode, the face/edge preview does not show up in red under Select Component Priority. I have to wait for the select other option to come up to see which face I am on. If I click on the face or edge it will show up but not until I do. I don't remember changing any settings that would cause this. I could have the select other option delay set to zero or I could change it to another selection priority but I don't remember having to do that before.
View 2 Replies View RelatedHow can I get the original display name of a part (content center family name) from an occurrence in a assembly document
View 4 Replies View RelatedI'm trying to change the display name of part at the part level (not an occurrence in an assembly). After the part file is saved initially I'm running an ilogic routine that assigns a "special" part number (not the same as the file name). I can get the part number into the PN iproperty easily but I can't find a way to programmatically change the display name in the top browser node. Please see attached for clarification.
View 4 Replies View RelatedI'm on inventor 2012 and I've not used it in a whlie. I thought I remembered in an assembly there was an origin indicator for each part in an assebly or a way to turn it on. I know I can turn planes and axes on in the origin folder but it would be quicker to just glance at a triad at the part origin. There's a similar command in MAYA called display local rotation axes.
View 4 Replies View Relatedattached is an image of an assembly, i placed a part in the assembly and only half of the part is displayed.
View 2 Replies View RelatedHow can I display a sketch or projected geometry that is not a closed loop in a ipt drawing? Historically I have to use a closed loop and emboss in order to display the geometry in a drawing.
Then move that forward to a DXF file for its intended use. I think there should be a way to just have lines placed on the model and display it on a drawing without it having to be a feature.
I can't get the cable to show up in any drawing views.
View 3 Replies View Relatedhow could I get the name of the last inserted part or assembly and select it?
View 4 Replies View Relatedhow to select Content Center Part Automatically. Now I use pick methode for select CC part.
Here's my code :
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click 'Membuat koneksi ke Inventor Dim m_invApp As Inventor.Application = Nothing m_invApp =
[Code]....
I am used to selecting a part then selecting find in browser. I have lost this ability due to my selection not staying hilighted. As soon as I move pointer away from part, the selection hi-light disappears. I looked in App Options, but unless I missed it....
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
i wanna making a extrusion from every select line in Part
/code
Public Sub test()
Dim oPartdoc As PartDocument
Set oPartdoc = ThisApplication.ActiveDocument
Dim oCompDef As PartComponentDefinition
Set oCompDef = oPartdoc.ComponentDefinition
Dim oSelectSet As SelectSet
[code]....
so this code dosent work
In our part list we have a column for Material, ipt's display the material and iam's display blank expect for a few instances that display Welded Aluminum-6061(see attachment). These assemblies are all steel and not weldments. What would cause this and how can it be fixed?
View 2 Replies View RelatedMy photos will no longer display on the web, just a box with an X. I must have changed one of the jpeg options inside 'save for web' window. I'm designing webs with Expression Web 4 and I'm using Internet Explorer...
View 5 Replies View RelatedI am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedAfter backing up my Photoshop Elements 8 catalog, my folders no longer display. How can I re-display them?
View 1 Replies View RelatedI've been using the FastPictureViewer Codec pack so that DNG and camera RAW files show as thumbnails in Explorer for quite some time. Upon upgrading to LR4, DNG files no longer display as thumbnails, but as the generic Windows icon for an image.
Upon researching the issue, and upgrading the Codecs from the supplier (which still did not fix the issue), the supplier tells me the following:
What we solved [in the update] was a crash with the new files. Adobe did not document their changes, so there is not much we can do except ignore the files. This is what happens when owners of proprietary formats decide to change stuff without notice.
If you turn off the "fast load" and "lossy" options the DNG will still be created following the published 1.3 specification and will work with 3rd party software including ours.
The "new DNGs" are for Adobe private use only at the moment. We don't know (beyond vague promises on employees personal blogs) if they will ever document what they did and publish an updated specification, they are certainly under no obligation to do so. The decision they took not to release updated DNG specs even before LR4 came out was a deliberate one.
While I resolved the problem by turning "fast load" off, I find it highly disturbing that Adobe has made undocumented changes to the DNG format that break 3rd party software. I thought the whole idea of DNG was that it was an OPEN FORMAT and was to prevent situations such as this. At least this is how they sold it to the public and their argument against "proprietary camera manufactuer RAW formats" that could "change at any time".
A couple of things that seem to be missing in LR4. In all previous versions of LR, I could select non contiguous folders (or collections or a mix of the two) by holding down the Command key (using a Mac). That doesn't work in LR4. Also, when I create virtual copies (which I also do all the time), the copies lose the name of the original. They are simply name "copy 1."
View 5 Replies View RelatedI am using Autocad 2013.
I imported two solid models( *.stp) in one workplace. (Drafting & annotation/insert/import)
I am trying to subtract one from another, But one is hidden from another. (smaller one is in the bigger one) To subtract smaller one from bigger one, I need to select small hidden one.
1. How to select the hidden part? I cannot see from outside.
If I have tree view(navigation??), I could simply select one on the tree, But I don't know how to make to pop it up. Instead of clicking icons, I tried to use command, but what each model name is. (I tried imported file name, but didn't work)
2. How to check the model name so that I can use in command?
3. When I use command, I put SUBTRACT - enter , (select object- actually I click on the object) then it shows me "select objects:1 found" but when I hit ENTER, it shows me "no solid, surfaces, or regions selected" How can I properly select the object?
I currently imported two STEP files in one workplace, both are solid. I am working on 3D modeling-solid editing-subtract.
After moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View Related I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedThe part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View Relatedconvert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies View RelatedAs soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies View RelatedIn previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!