AutoCAD Inventor :: CIS / 2 File Export?
Aug 16, 2012
I have a frame that we have designed and detailed using Inventor and Frame Generator. The steel fabricator is asking for a CIS/2 model file to use with their Fabrication/Management software. I have done a search of this forum and found two posts asking about this format (from 2004 & 2009) but neither have any responses.
It does not appear that IV will export this information natively so I am looking for some kind of work-flow to get them this information using AD products. Any resellers out there familiar with a product/translator?
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 4 Replies
ADVERTISEMENT
Sep 15, 2012
I am trying to have Inventor to automatically export a SAT file when I close the program, I have searched the discussion boards and have not been able to find any post about automatic export in Inventor or Revit.
Goal:
My goal is to have Inventor to automatically export a SAT file in order to have those who are using Revit MEP to always have a updated version of the Inventor Model in their model drawing and vise versa.. This I think would take the human factor out of the equation, WHY?.. well we humans tend to forget about those working around us and are not that good in exporting a updated file every day!
View 2 Replies
View Related
Aug 24, 2010
I want to automate the process of creating Revit family files (.rfa) by exporting a .adsk file from Inventor and importing it into Revit and saving it as a .rfa file.I can't find any documentation on how to do this.
View 6 Replies
View Related
Mar 5, 2013
Do I NEED to use the DataIO to export the flatpattern to dxf, or is there some way I can pas a Flatpattern to the DXFAddIn.saveCopyAs()?How do I pas the .ini file to the DataIO.WriteDataToFile().Do I need to write my own parser to get the Format correct?
View 3 Replies
View Related
Nov 17, 2011
I have a little problem with JPG files. When I’m trying to export .IPT file to JPG file I can’t adjust quality of JPG file. Even if I change pixel quantity up to 1000 quality of picture stays same. Also size of the file is does not change no matter how much pixels I use. How to improve quality?
View 4 Replies
View Related
Jul 26, 2013
How can I import 3dxml file into Inventor format and how to export Inventor file to obj format?
View 3 Replies
View Related
Jan 2, 2014
I have a customer that is trying to export a file out as an STP file. When he brings up the Export or Save As dialog boxes none of the normal model file types are listed. I have had him do a Repair and a Reinstall of INV 2013 which did not fix the problem.
View 9 Replies
View Related
Aug 6, 2010
I'm wondering if there is a possibility in Inventor to export a surface model as a STL file. I use CAD programs to prepare models for simulations in other software and I would like to work with Inventor because my Department uses it. Till now I have been using Solid Works and with a little trick it is possible to export surfaces as a STL file. In Inventor I didn't manage to do this. So, is it possible?
View 9 Replies
View Related
Oct 4, 2010
Is there a way to define the export tolerance of a step file? Now the tolerance is always set to 0.01mm but i need a tolerance of 0.001 to go further in another CAD / CAM System.
View 6 Replies
View Related
Mar 15, 2011
I have problem with Save As Command from Flat Pattern in Sheet Metal Mode. I want to export to DWG file from Flat Pattern to send this layout to our Laser Machine database.
I'm using Inventor 2010 with Vault Manufacturing.
View 6 Replies
View Related
Jul 22, 2013
What is the best way to reduce the file size of an Inventor IAM 3D Model when exporting to a DWG format? My client only needs a couple of 2D views in order to take measurements in AutoCAD.
View 5 Replies
View Related
Nov 14, 2012
In my company we work with quite large assemblies, a small project im working on now, contains 527 documents with a total of 3088 occurrenses. Our customers often request STEP files which is a real pain for us to create.
Usually we have to start exporting the assembly at closing time and let the computer work over night, and the product is often a file in the 200mb range, which is too heavy to handle via e-mail, and also takes a lot of time to import to other CAD software.
Using the Task Scheduler is not an option since our file server isnt compatible and refuses to let go of files unless they are checked out manually.
View 1 Replies
View Related
Aug 27, 2013
I've been using 3D PDF Converter to convert my inventor models which have been saved by way of Export - CAD Format - Parasolid Binary Files. The default version is 25. You would think that this new version would be new and improved. However, it does not work.
View 2 Replies
View Related
Aug 7, 2013
We have an idw package we use for Quality control. This idw has more than one sheet. Each sheet has a part placed on the sheet with dims.( DWF attached). Next we open DA inside of the file and run a report. (exported txt attached). I am trying to use ilogic the make the same report with a iLogic browser button pick. I have 2 codes (code examples on attached jpg) that i need to make into 1, or whatever works.
1st code
Dim oDoc As DrawingDocumentoDoc = ThisApplication.ActiveDocument Dim oSubDoc As Inventor.Document Dim oPropSets As PropertySets Dim oPropSet As PropertySetDim oPartNumiProp As Inventor.Property For Each oSubDoc In oDoc.AllReferencedDocumentsIf oSubDoc.documenttype.
[code]....
2nd code
fileheader = "QAF Parts for Planning "fileheader1 = ThisDoc.PathAndFileName(True) 'first line header of txt filedescription = "Components to use for Nesting" 'use this variable in the body of the txtdelimiter = "," 'character to separate the names and values on each lineoWrite = System.IO. File. Create Text (ThisDoc.PathAndFileName(False) & ".txt")oWrite.WriteLine(fileheader) 'include the fileheader on the first.
[code]....
View 4 Replies
View Related
Apr 3, 2012
how I can export an assembly parts list to a text file that can be opened by notepad?
I want to do this from the IAM file, rather than from an IDW file.
View 1 Replies
View Related
Oct 26, 2012
I have been searching for a macro to export the start and end point of a line coordinates to excel, but I can only find information on how to export 3D Points.
Is it possible to program a macro that allows me to export the start and end point of various lines in a sketch?
The objective of this is to connect an excel file which is updated when I create a line with it correspondent points, then i could not only import these x,y,z coordinates from excel to inventor but I whould be able to update my spreedsheet whenever I change my sketch.
View 1 Replies
View Related
May 4, 2013
One of the common processes we have to do is to transilate file formats into a type we can use. Most the time it is for use in AutoCAD MEP...
Is there a good one-stop place to get info on import export options from / to softwares included in Autodesk Building Design Suite Ultimate?
View 1 Replies
View Related
Dec 4, 2012
I am trying to export each sheet in an Excel file to an separateTXT files.
I currently have code to read each cell in a sheet, but unfortunately some of the Excel sheets have in excess of 5000 cells and it is taking too long to read. So I am switching to another method.
The program will check dates of TXT files and XLS file to make sure TXT files are current (if not, open and recreate TXT files).Then read the TXT files (much faster).
Where I am getting stuck is 2 places -
Get the names of each sheet in the excel file (not always a known name)
Save each sheet as separate TXT file.
Here is condensed code so far without error checking, etc -
(defun E2TXT (FileName /)
(if (and (setq XLfile (findfile FileName)) (vl-file-systime XLfile) (setq XLapp (vlax-get-or-create-object "Excel.Application")))
(progn
[Code]....
View 4 Replies
View Related
Feb 4, 2013
i have any problem about export point from dwg to *.txt file.i have point file *.dwg from my friend,,but i confused why that point can't export, show warning "No point were transferred from the source" point is in layer 0...I attach the dwg file.
View 5 Replies
View Related
Jul 24, 2006
I'm using Photoshop 7, and suddenly, by Gif89a Export Filter is gone from the
File > Export
View 2 Replies
View Related
Aug 28, 2012
How can to export my SDF file to ESRI Shape file? In AutoCAD Map menu have a commands, but those works only for drawing objects. Have any way to export SDF to Shape?
View 9 Replies
View Related
Jan 21, 2013
why the "custom text" and "start number" is not available anymore on Export?
View 2 Replies
View Related
Mar 10, 2013
I see that keyboard shortcuts in revit 2013 can be eported as xml and imported back from an xml? Is it possible to export the shorcut list as a simple txt file or excel file, for printing purpose. Some of the bim modellers in my office would like to print the shorcut and stick it on their desk.
View 2 Replies
View Related
Dec 5, 2012
I create short videos using the PS frame animation panel. I used to be able to FILE-export-render video- and choose MPEG-4 Video in the settings panel which would render my file into a small .mov file. Now in CS6 the new render video panel does not have that option. I tried the QT options in the export window and my file is hugh! The H.264 option gives me an .mp4. I put the .mp4 into my web page via Dreamweaver and my video does not play when uploaded into the sever. The video plays fine in Dreamweaver before I upload to the server. After I upload to the server I just get a Q and no video on my web page. If I render the same file in CS5 I am able to view it in my web page. ADOBE WHY DID YOU CHANGE YOUR EXPORT VIDEO RENDERING OPTIONS in CS6?
View 2 Replies
View Related
Sep 11, 2012
After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
View 14 Replies
View Related
Sep 28, 2011
I am wondering if there is a way to put the old save method back into the new gimp 2.7.3. I would like to be able to export to a new file format and automatically be using that file instead of the original file that I have just opened. If there is a plugin like this that would be great.
View 2 Replies
View Related
Jan 1, 2014
I have edited my video using after effects. I have been unable to export my file to youtube using a valid file name. All of the results have issues with sound and quality.
View 2 Replies
View Related
Jan 29, 2014
I am trying to export it as *.stl So I typed "export" and typed filename as **.stl then command window says "select solids or watertight meshes"
But I am not able to select it. I guess the model is not solid?
Then How can I make it as solid model? I attached file.
View 6 Replies
View Related
Jan 1, 2014
I'd like to export AutoCAD file from a model built in 3Ds Max to get some engimeering drawings(as below) But the dwg file export from 3Ds Max is always with the wireframe(as the last one) How could I solve this problem?
View 1 Replies
View Related
Nov 2, 2003
I am facing a trouble while exporting a drawing containing Lwpolyline features with Object Data to shape in AutoCAD Map 2000.
Below is the Object Data Info It is creating .shp,.shx files and not creating .dbf file.
No. of fields: 45 to 50 fields
Field Name: up to 18 characters
Fields type: Character
But it is exporting to mif file perfectly.
But i want to export my drawing to shape only.
View 3 Replies
View Related
Feb 15, 2013
I'm working for to supply the work I've done as a PNG file that can be edited. I was told that a layered PSD file can be converted to a layered fireworks PNG file. I've tried all sorts of things but either ended up with a flattened image or each layer as a seperate file.
View 5 Replies
View Related
