I created sheet metal parts from boundary patch. In the included files, the boundary patch is not flat, so it didnt unfold. Is there a better way doing that or a better method to create flat boundary patches ?
View 4 RepliesI'm having problems creating a boundary patch on the attached model, Its a Y-Pipe joint in 3 planes that I'm attempting to split in half. I've used a silhouette curve to create a centre line in a 3d sketch then joined the ends together, however when I try to select the lines to create the boundary patch it only allows me to select some not all of the lines.
View 4 Replies View RelatedCan we add guide lines to surface patch boundary ?
I dont see any guide line option. The only options are G0,G1 & G2 continuty.
Link
add guide lines like in a Loft?
C1
Inventor Professional 2013
Vault Collaboration 2013
I want to select all circles in the design to patch them. How do I do this in VBA? Drawing the circles is no problem.
View 2 Replies View RelatedI can't find a way to create multi flat patters in one part from a lofted sheetmetal part. Also, didn't the developers fix the 'can't make a flat pattern from a derived part'?
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
I am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
I have a complex surface that consists of many patches. I need to place a work axis perpendicular to one of the patches on the surface of the cheek. It could be on the interior of the patch or it could be at one of the vertices of the patch.
View 6 Replies View RelatedI know I'v done this before but I'm having trouble getting a detail view to just show the jagged cut lines where it crosses the part only & not all the way around it. See images attached to show the problem.
Inventor Suite 2013 Ultimate
How does one remove the boundary box for a detail view? I don't want it sitting in my main view, as this is a conveyor and it's very obvious at to where the drive arrangement is sited. See attached.
I'm guessing changing it to another layer that does not print is one option, or?
In the attached sample file if you edit the sketch in the first surface feature and change the dimension of 600 to 700, both the patch and loft features fail. It seems to be the curved edge that is the problem in both cases.
I cant see anything wrong with either way of modelling this so assume its a bug.This causes other problems in my real model with parts that reference these types of surfaces falling apart further down stream and is wasting heaps of $$$.
How to use ellipse as boundary for detail view? I can only see rectangles and circles as my choices.
View 4 Replies View RelatedInventor 2012, in an *.idw, can you make the detail boundary box square? I see there are two options for two different circles but not an option to make it square. Is it not possible or am I missing something?
View 2 Replies View RelatedI used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
I am not sure exactly why this is a limited feature of Inventor 2011 but when you want to select a sketch to create a boundary patch you have to select each part of the sketch in sequence. It's a pretty laborious task. I am looking to a way to automate this using i logic.
View 5 Replies View RelatedInventor 11 - Sp1
Why is the scale of my Detail Boundary line different than my Section Line scale? I have set the global line scale so that hidden and section lines look OK, but the detail boundary line spaces are so close that it prints as a continuous line. I am using the same line weight and line type for both detail and section lines.
How to remove the view label text which is attached to a detail boundary? I know that if you double click ont he etxt you can manually delete it from the format text window but I want edit the default setting so that it doesnt appear on creation.
See attached image.
Is there any way to control the priority of what information Inventor displays "on top" in a drawing when you have two elements that overlap?
My specific situation is I have a text note whose boundary (where the text 'box' would be if that was turned on) overlaps a detail of a section view and seems to be preventing the display of the hatch layer in one of my section views.
I have attached 3 pictures to show this problem. The pictures show the section view in 3 slightly different positions relative to the text box. I selected the text box before taking the screen capture so you can reference the green "handles" to know where the boundary of the text box would be. Notice how the hatching of the welds, flanges, and pipe as well as a portion of the extension line and arrow for the 3/16 dimension are 'covered' by the boundary of the text box.
Is there a way to control the priority in which different layers are displayed, or is there a function similar to the "Bring Forward/Send Backward" options in Microsoft Word?
FYI, I am running Inventor 2013 RTM build 138.
I have created parts, assemblies and drawings . How can i create 2D flat cnc drawings of the components for production? i am in woodwork and manufacturing not metalwork so the whole metal facility in inventor is a little redundant.
Description required on the best process or any process to create 2D cnc drawings from the components? Now, when i say drawings, i do not mean CAM integration. I mean 2D .dwg files of the component that would show say rebate lines, drill holes etc.
My next challenge with my rolled cone bottom is to place an oval in the cone that will give the right edges for the lazer pattern. If I create the cut while in the formed shape the edges are not perpendicular to the face in the flat pattern. If I place the cut in the flat pattern, it is suppressed when the part is returned to the formed state.
In other packages I would unfold the part, place the cut, and then refold it retaining the cut. How do we deal with this situation here?
I want to make dxf files from a flatpattern with ApprenticeServer in a VB6 project. I tried this code but I get a Error 5 on the line :
oDataIO.WriteDataToFile sOut, strFilenaam
What's wrong?
Public Sub Maak_UitslagDXF_Appr(strFilenaam As String)
Dim oApprenticeServerApp As New ApprenticeServerComponent
Dim oPartdoc As ApprenticeServerDocument
Set oPartdoc = oApprenticeServerApp.Open(strFilenaam)
[Code]....
My flat pattern of a sheet metal part fails when I added strenthening Press ribs to the middle of the part using an iFeature.
I know Inventor is not capable of flattening embossed sheetmetal but is there a way to still get the flat pattern & ignore the formed areas?
Seems to me I was able to add some model features in the past like bosses, extruded holes KO's etc & I could still make a flat pattern.
I know I can use derived part to do it but that adds complications.
IV 2012 SP2
Inventor Suite 2013 Ultimate
It's my first time using sheet metal in a drawing and I can't figure out how to show flat pattern in the drawing. When I insert the base view into my drawing, the bottom to "Sheet Metal View" to "Flat Pattern" is shown, but it's ghosted out so I can't select it. Is there something I have to do in the part drawing in order to activate this feature?
View 2 Replies View RelatedWhy can you only export a part as 2D sheet metal part? All parts are of some sort of machine component be it sheet metal of wood for CNC. The file prep is the same..
When will autodesk recognize that plenty of companies are in woodwork and Shopfitting? It's not only metalworking that benefit.
Luckily for me, I'm good at programming so I make my own tools but there are others less skilled. Open the umbrella autodesk......
Does inventor allow you to place the flat pattern of 2 different parts on the same drawing? We have instances where we have items 01 and 02 detailed on the same drawings(carry over from board days, and other CAD system) and need to show a flat pattern of them both but Inventor will not allow us to choose the flat pattern view for the second part.
Inventor Pro 2010
So, I have an assembly with a sheet metal part and a lot of pressed studs, spacers, weld nuts. I'd like to do a flat pattern with these parts in it in order to give their positions to manufacture, because they have to be pressed and weld in flat pattern phase, before bending.
Is there any easy way to do this (instead of saving flat pattern as SAT and insert every components again)?
I have designed a hopper using the lofted flange command. It is a 24" sq going to an 8" diameter. I would like to apply the rip feature to make (4) separate sections for this hopper so that (4) separate pieces can be cut on a waterjet machine. I can make it so that only (2) flat patterns are required, (2) pieces cut for each.
Can this be done in Inventor 2011? Also, can you recommend a good book on Sheetmetal in Inventor?
If i have even used the correct technique but how do i perform the bends in the flat bar so as the bottom and top section are vertical and the small mid section is on the angle. At the moment the mid section is displayed vertical when using the cub please see attached files.
View 4 Replies View RelatedI am trying to develop a macro that exports all flat patterns for sheet metal components. I haven't been able to get the following code to work. It give the error message "The document you are trying to save is not a drawing document"
Sub PublishDXF() Dim DXFAddIn As TranslatorAddIn Set DXFAddIn = ThisApplication.ApplicationAddIns.ItemById("{C24E3AC4-122E-11D5-8E91-0010B541CD80}") Dim oDocument As PartDocument Set oDocument = ThisApplication.ActiveDocument Dim oContext As TranslationContext
[Code] .......
I just got around to installing my subscription upgrade from INV PRO 2012 to 2013. I am having trouble getting sheet metal flats to show up in the idw's. The folded parts are visible, solid parts are visible, etc. The problem seems to be specific to flat patterns. I have attached a screen shot of a sample part.
When I hover the mouse over where the flat pattern should be, the red dashed box which usually encloses the view shows up, however it is tiny. Barely the size of the view label.
how can i make each end of the spring flat.How best to cut the end sections so the wire is flat
Invenotr 2012