I was wondering if there is a way to bend a derived componet. I have an odd extruded part and would like to cut and bend it. I want to do it this way so I can also include the cut length before bend. I know of frame generator, but am not able to use it since if falls out of the structure of how our files are saved.
View 5 RepliesHow can I bend this component with the correct radius in Sheet Metal and then Flange it (It consists of two items being put together but It's hard to see)? I used the bending function in standard before but I have to Flange now.
View 5 Replies View RelatedI think there might be a bug in Inventor 2012 with regards to derived components and their physical properties, otherwise I've never noticed it before...
If I derive a component and use an IAM as the Base Component and choose the 'Single composite feature' as the option then the physical properties of the newly created derived IPT is the same as the original IAM. That is expected behaviour when you choose one of the Solid options, but a Surface shouldn't have a mass - by definition.
If I use an IPT as the Base Component, I get the expected behaviour, i.e., a surface doesn't have a mass.
The whole purpose of creating a 'Single composite feature' as a surface is unnecessary if it's going to have physical properties...
Is there and easy way to change the base component of a derived part?
The way I use to do it, is to rename the base component. Then open the derived part, and point to the new base component after the "error message".
In the idw environment there is a "Replace Model Reference"" which does it for 2D drawings.
btw. I use Inventor 2013.
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
II need a way to tell if a component occurence is a virtual component.
I'm using a For Each loop to cycle through all of the components in an assembly, and if the component is itself an assembly to set the LOD to "Custom". I'm using the definition document descriptor object for this. It all woks fine until the loop comes across a virtual component which doesn't have a definition document, so I need a way to check if the component is virtual and needs to be skipped.Here's the
Option ExplicitImports Inventor.LevelOfDetailEnumSub MainiLogicVb.UpdateWhenDone = TrueDim doc As AssemblyDocumentDim oLOD As LevelOfDetailRepresentationDim oAsmCompDef As ComponentDefinitionDim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesdoc = ThisDoc.DocumentIf.
[code]....
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies View RelatedI have an assembly which has a few components suppressed.
My end results is another copy of the assembly (with copies of the all the parts) in another directory
Now i am able to create copies of un-suppressed parts using; (this allows me to SaveAs assembly components which are not suppressed)
DocumentsEnumerator = ThisDoc.Document.AllReferencedDocuments
And save a copy of the assembly using
ThisDoc.Document.SaveAs
I also added the fllowing snippet (which I am not sure what is does), but it does not work for me
Component.SkipDocumentSave = true
When I open the newly created assembly, I still see the suppressed components in the model browser
I want to either;
Skip saving the of the components in the model browser (i.e. the Assembly)
OR
Delete the suppressed parts in the Assembly, so that they do not save altogether
I am trying to run a 4 points bending simulation on a concrete beam but i can't create the 2 support points on the bottom side. Is there an option that i could use or a tutorial that explains the process?
View 3 Replies View RelatedIs Inventor able to provide information about the bending angle of a lofted pieces ?
I'm trying to loft a piece from square to circle. The bender ask me what is the angle of this pieces.
WHAT I A TRYING TO DO: is bend a grid/mesh pattern of material to a certain radii and distance. In the attached DWG I have used either Extruded or Sweep to create the existing (latitudal?) grid but am not doing well creating the perpindicular grid at the arc drawn below the existing (lat.) grid.
I believe the dwg is a good representation of what I am attempting to do, and I am trying getting to my end result, whether it means using what i've begun or starting over, and using the "Best Practices" to achieve such.
I want to bend the sheet metal part as on 90deg
I have tried using bend and Fold tool but it dose not produce the right model as desired.
I am lisp programmer and i want to develop programme for Basic function of Bending /unbending of Sheet metal. How Can I do this.
View 1 Replies View RelatedWe have an issue where we are trying to bend a 1mm sheet with a 24mm radius. The one side must come out 105mm wide and the flange must be 50 mm wide. inventor gives a flat pattern width of 143.4
If we bend using a brake press and a 24mm tube blade then it wont come out the right size. its like the flat pattern isn't big enough. we get the 50 mm flange but whats left over is 99 and not 105. How do we deal with something like this?
Can inventor export tube bending data from a part file? OR Is there a third party software
View 1 Replies View RelatedI am looking for broad principles as opposed to blow by blow information. I am planning to use inventor for the design of model aircraft. My problem at present is a lack of understanding of the possible ways in which the following can be achieved.
The sides of the fuselage are sheet material ( balsa or ply or a combination ) which need to be available in a 2D format so they can be converted into DXF files that can then be sent to my laser cutting machine.
I also need to model the fuselage as a solids model in inventor. How does on go about modelling something like this? The curvature is going to be single as opposed to double.
Ideally I woul like a command that enables me to take a 2D sketch ( a copy of which is converted to DXF ) and to bend it around formers to form the fuselage shape. That would be similar to the process that is used in the actual construction but I dont think that there is one as yet.
Is there a method of extracting XYZ data to use for CNC tube bending from components developed in frame generator ? I know that in routed systems you can export that data, but can the same thing be done with frame generator or any individual bent tube or pipe part?
View 4 Replies View RelatedI've created a sheet metal part and have set my parameters. In using the fold feature, cannot create bend past 180 degrees. Radius is large enough (21") and sheet is long enough as there is still flat sheet after a 180 degree bend. How do you create bends past 180 degrees?
View 4 Replies View RelatedI want to know if you can make the simulation of sheet metal bending, I'm designing a bending die, and I need to simulate the folding.
View 2 Replies View RelatedI want to bend/fold this piece over a specific profile. There are too many tools for bending a sheet metal and I just don´t know where to start. I searched the web and this forum but there are too many options. Also when I create the flat pattern, it should be precise with a difference max +/-5mm. I thought I could use contour flange. Usualy it works. But only when it´s a simple rectangle. But not on this part.
I work with Inventor 2011.
Trying to create a fold/bend/flange along a curved feature. I modeled the part to view but would like to be able to model this feature in sheet metal. This is how it would be manufactured, probably in a die roll.
View 6 Replies View Related have one assy comprising of a valve, made in steel, an actuator made in aluminum, total weight combined is 36 kg.
I make this assy a derived ipt.. i have tried all the output options, single solid, multy solid and the weight is not the same.. since its a new ipt has its own material, ok makes sense.. .. So i use composite, i get the correct weight (yay), but now i cant turn the visibility off on the 2d drawing, in certain pipe spool view representations.
What is the correct procedure for turning multi material assys into an ipt.. to get the correct weights and get the drawings to work properly?
Now I want to know how to exclude derived parameters of an assembly and of occurrences in this assembly.
View 6 Replies View RelatedAfter I have created new part by derive from assembly, it have some part moved don’t likely assembly master.
I’m used inventor 2013 with windows 7 (64 bits)
is it possible to get the material of the derived part in vba ?
View 4 Replies View RelatedI've got a sketch in a part that I want to derive into its own part and place in an assembly. I can do that no problem, but the text on the sketch is just empty boxes. Is there any way to bring the text through to the derived part?
The text is orientation information that I want in both the part and the assembly, not for permanent display but just to hover and display or switch on when needed. Maybe there's a better way of doing it if what I'm asking for is impossible.
IV2013
We have written an add-in that allows you to specify position and non-uniform scaling while creating a derived part.
[URL]
Some potential uses of this add-in include:
1.. To simulate an iFeature where you add or remove material - use Sculpt to add and Split to remove material. Unlike iFeature you could edit the source and make the changes be reflected in the derived part.
2.. To simulate an iFeature that places a sketch - useful for designing frames.
3.. To design a progressive die - you might want to place, with relative displacements, multiple parts representing different stages (or configurations) of a formed sheet metal part
4.. To realign (rotate) a part - sometimes skeletally driven parts (for example, four-bar linkage members) are not aligned with their "natural" coordinate system, causing skewed drawing views
5.. To derive a part with different scaling factors in X, Y and Z directions, which is useful in mold design
6.. To integrate two skeleton systems that do not share the same coordinate system
7.. To create scaled sketches (this should become useable after R11 SP1)
Possible to have more than 1 derived part in a part.
And is it possible to select on which plane and location the derived part is to be?
I have a part with a derived part but now I want to add another part to it. is this possible?
Most of my part files contain at least one sketch which is derived from another part file. These derived sketches do not update like they did in our previous versions of Inventor.
If you change the geometry on a sketch in the base component, the updates will flow through to the derived parts. If you add geometry, it also works. However, if you delete any geometry from the sketch in the base part, it will not be deleted in the derived sketches in the second, third, etc. parts. The 'deleted' sketch geometry remains in those parts until you go into all the parts which derive from the base part and manually delete it. This is a significant problem for for our workflow.
Is there an option I have missed that changes this behavior so that deleted geometry in a sketch will also be deleted in any derived sketches in other parts?
I have a vba project that can extract an assembly BOM.
However, it does not output derived parts. What is wrong with my code, shown in the attached file?
What I am trying to do is create a ipt file of a "Laser-Cut" component. Use this component to make another component with drilled, tapped holes in it. Then use this plate, containing the drilled and tapped holes in an assembly.
I need to output this "Laser-Cut" part in my vba created BOM. Is it possible?
Automation of the sheet metal bending parts unfold /refold in vb.net for Inventor 2013.
I want to unfold the part with selecting the one of the face as stationary face and further selecting the bend/ bends with reference to face in vb.net
For refold, I have to select the stationary reference automatically , based on some criteria, and further to select the single and multiple bends by using API.
Also, I want to find the bends and faces relationship i.e.
How to find the bend associated with number of faces, how to find face entity using internal name ;
The code I tried I am attaching here for your reference.