AutoCAD Inventor :: Text In Derived Sketch
Nov 10, 2011
I've got a sketch in a part that I want to derive into its own part and place in an assembly. I can do that no problem, but the text on the sketch is just empty boxes. Is there any way to bring the text through to the derived part?
The text is orientation information that I want in both the part and the assembly, not for permanent display but just to hover and display or switch on when needed. Maybe there's a better way of doing it if what I'm asking for is impossible.
IV2013
View 1 Replies
ADVERTISEMENT
May 21, 2013
I've got a problem with creating Path in Inventor VBA. I've created a source block definition in SourcePart.ipt, derived it in DestPart.ipt, placed this derived SketchBlockDefinition in Sketch3 and draw 3 extra lines. Now i want to add a SplitFeature with SplitTool as a Path of 3 lines, but first i need to create this Path. There is no problem with creating path from this 3 extra lines, but when i want to create path from lines that belongs to derived block - an error occurs.
Below is sample code (also included in attached file - DestPart.ipt). Try run it with DestPart.ipt as an active file. When Inventor is prompting for Selecting Sketch Entity first select one of 3 extra lines, macro ends with no errors. Then run it again, this time select one of 3 lines that belongs to SketchBlock - an error occurs.
When you try to add SplitFeature (Trim Solid) by UserInterface Button "Split" there is no problem with any set of 3 lines.
Sub CreatePathTest() Dim oPartDoc As Inventor.PartDocument Set oPartDoc = ThisApplication.ActiveDocument Dim oPickedSketchEntity As Inventor.SketchEntity Set oPickedSketchEntity = ThisApplication.CommandManager.Pick(kSketchCurveFilter, "Select Sketch Entity") Dim oNewPath As Inventor.Path Set oNewPath = oPartDoc.ComponentDefinition.Features.CreatePath(oPickedSketchEntity)End Sub
My System is Windows 7 32bit/64bit, Inventor 2012
View 1 Replies
View Related
Jul 14, 2012
I'm using ilogic to automatically build standardized descriptions that are linked to a field in our PDM system for future searches. The problem is that the variable "Length" (shown below) can sometimes be a whole number so it drops the trailing zeros and I want it to always be a two decimal value.
Formula:
iProperties.Value("Custom", "2ND_SUBTITLE")=CStr(ID)+" ID x "+CStr(OD)+" OD "+CStr(Round(Length, 2))+" LG"
Computed String Value
2.701 ID x 3.253 OD x 8 LG
View 1 Replies
View Related
Sep 12, 2012
is it possible to create 3D sketch from text?
I need it for engraving as a toolpath and for drawings.
Emboss tool is more suitable for styling and visualisation.
Attached sample from Pro-E:
View 3 Replies
View Related
Apr 17, 2013
I'm trying to put some text into a sketch I have. My issue is the text is coming out sideways. I want the text horizontally.
I tried to use the rotate tool but I can't find a center point in the text box.
View 5 Replies
View Related
Oct 1, 2012
Is it possible to convert Text to a sketch in which I can edit individual letters. I want to use the text as a profile path for a plasma cutter. I tried Emboss, but Letters with islands in them, completely cut the letter out. I want to be able to add a bridge for one of a better word, by editing a sketch.
View 1 Replies
View Related
Jan 19, 2006
I have an idw where I am trying to pattern elements with a sketch. One of the items being text. I can pattern all of the geometry but the text will not pattern.
View 5 Replies
View Related
Sep 3, 2012
Is there any way to change the size of dimension text in sketch? My students cannot see the dimension when I demonstrate the sketch.
View 9 Replies
View Related
Nov 27, 2012
I have several name plates which are embossed, and only the description changes from job to job, but find it a nuisance having to go into the part,edit sketch then edit text! each time I want to change the description .
I was initially going to get round this by creating a form and linking it to the text parameter! But for some reason it won't take in the text parameter I created and will only find and take in numerical parameters?
Is there any way around this? I know it is possible in inventor 2013. I am currently working with Inventor professional 2012.
View 2 Replies
View Related
Feb 29, 2012
I am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
View 2 Replies
View Related
Jan 10, 2012
When I add a text to a sketch, I can constrain the rectangle to set its size, orientation and position.And I can set the text width to fit into the rectangle. But I wasn't able to set the text height to fit into the rectangle.
Am I missing something or is the fit text option doing only half the job?
View 1 Replies
View Related
Oct 27, 2011
How do I increase the size of the text of dimensions in sketch mode.
View 4 Replies
View Related
Mar 27, 2013
INV Routed Systems 2011 sp2
I needed a specific Adobe font engraved on a nameplate.
I purchased and installed the font and it is available to me in other applications.
I went to use it within my sketch and it didn't display as being available.
Do I need to do something other than install the font on my machine to use it within my model?
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000
View 7 Replies
View Related
May 11, 2004
Wouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
View 1 Replies
View Related
Sep 21, 2011
See video. What can I do about that?
View 1 Replies
View Related
Jun 17, 2012
My iLogic ability is quite limited outside of what I use regularly?
I am trying to change the font style in every text definition in all my sketch symbols in one go. Actually I have started it based on only a selection set but I would be happy with just all symbols too. Below is where I got to, I am stuck on the For Each line to cover each text box in the symbol. Some of the other syntax may not be right either but I can't test it all the way through.
Dim oDoc As DrawingDocument: oDoc = ThisApplication.ActiveDocumentDim oSheet As Sheet: oSheet = oDoc.ActiveSheetDim i As LongDim oSymDef As SketchedSymbolDefinition: oSymDef = oDoc.SketchedSymbolDefinitions.Item(i)Dim oText As TextBoxesFor i = 1 To oDoc.SelectSet.CountFor Each oText In ............oSymDef.TextBoxes.Item(i).FormattedText ="<StyleOverride Font='ARIAL'>...< /StyleOverride>"NextNextInventorVb.DocumentUpdate()
Also the XML style override is not complete if this is the only way to achieve this result.
Inventor Professional 2013, Autodesk Simulation Multiphysics 2013
Windows 7 x64 Core i7 32GB Ram FX2000
View 6 Replies
View Related
Dec 20, 2011
I’m trying to get the embossed text on a nameplate (done in sketch on a part) to change with updating a custom property in iProperties. Right now I’m using iLogic so I can change the text in User Parameters and that updates the embossed text. So where I’m having an issue is the Export Parameters tab is grayed out so I can’t get it work with my custom properties.
View 1 Replies
View Related
Jul 18, 2013
What I would like to do is create a custom dialogue for each of 3 or 4 standard sketch symbols we use on a regular basis. I'd like to load 'suggsted' values out of an excel spreadsheet and allow the user to pick from them or enter in a custom text string if required. The values would then become part of the sketch symbol.
I've spent some time looking into iLogic rules and I think I've determined that they're not flexible enough to do what I want.
If I'm correct, it is possible (or a good idea) to do this using a VBA macro? I'm a little hesitant to go down the full blown add-in route. While I'm pretty confident I could work it out.
View 3 Replies
View Related
Oct 3, 2008
This code works with no errors but does not change the text size. A user can over ride the text size (Font size) so I'm hoping it is possible thru code.
Dim oSketch As Inventor.Sketch
Set oSketch = oPartDoc.ComponentDefinition.Sketches("Sketch1")
Dim oText As Inventor.TextBox
Set oText = oSketch.TextBoxes.AddByRectangle(pnt1, pnt2)
oText.Style.FontSize = 0.1
View 3 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Dec 3, 2013
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
View 2 Replies
View Related
Aug 1, 2011
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
View 9 Replies
View Related
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
May 30, 2013
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
View 8 Replies
View Related
Aug 22, 2012
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies
View Related
Mar 4, 2012
what is the difference between a sketch and a planar sketch?
View 2 Replies
View Related
Aug 16, 2012
I'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies
View Related
Aug 23, 2012
have one assy comprising of a valve, made in steel, an actuator made in aluminum, total weight combined is 36 kg.
I make this assy a derived ipt.. i have tried all the output options, single solid, multy solid and the weight is not the same.. since its a new ipt has its own material, ok makes sense.. .. So i use composite, i get the correct weight (yay), but now i cant turn the visibility off on the 2d drawing, in certain pipe spool view representations.
What is the correct procedure for turning multi material assys into an ipt.. to get the correct weights and get the drawings to work properly?
View 1 Replies
View Related
Aug 13, 2013
I was wondering if there is a way to bend a derived componet. I have an odd extruded part and would like to cut and bend it. I want to do it this way so I can also include the cut length before bend. I know of frame generator, but am not able to use it since if falls out of the structure of how our files are saved.
View 5 Replies
View Related
Nov 6, 2011
Now I want to know how to exclude derived parameters of an assembly and of occurrences in this assembly.
View 6 Replies
View Related
