Is it possible to convert Text to a sketch in which I can edit individual letters. I want to use the text as a profile path for a plasma cutter. I tried Emboss, but Letters with islands in them, completely cut the letter out. I want to be able to add a bridge for one of a better word, by editing a sketch.
View 1 Repliesis it possible to create 3D sketch from text?
I need it for engraving as a toolpath and for drawings.
Emboss tool is more suitable for styling and visualisation.
Attached sample from Pro-E:
I'm trying to put some text into a sketch I have. My issue is the text is coming out sideways. I want the text horizontally.
I tried to use the rotate tool but I can't find a center point in the text box.
I'm using 2007 LT. I Would like to explode a block with the attribute text remaining as text.
View 9 Replies View RelatedI have an idw where I am trying to pattern elements with a sketch. One of the items being text. I can pattern all of the geometry but the text will not pattern.
View 5 Replies View RelatedI've got a sketch in a part that I want to derive into its own part and place in an assembly. I can do that no problem, but the text on the sketch is just empty boxes. Is there any way to bring the text through to the derived part?
The text is orientation information that I want in both the part and the assembly, not for permanent display but just to hover and display or switch on when needed. Maybe there's a better way of doing it if what I'm asking for is impossible.
IV2013
Is there any way to change the size of dimension text in sketch? My students cannot see the dimension when I demonstrate the sketch.
View 9 Replies View RelatedI have several name plates which are embossed, and only the description changes from job to job, but find it a nuisance having to go into the part,edit sketch then edit text! each time I want to change the description .
I was initially going to get round this by creating a form and linking it to the text parameter! But for some reason it won't take in the text parameter I created and will only find and take in numerical parameters?
Is there any way around this? I know it is possible in inventor 2013. I am currently working with Inventor professional 2012.
I am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
When I add a text to a sketch, I can constrain the rectangle to set its size, orientation and position.And I can set the text width to fit into the rectangle. But I wasn't able to set the text height to fit into the rectangle.
Am I missing something or is the fit text option doing only half the job?
How do I increase the size of the text of dimensions in sketch mode.
View 4 Replies View RelatedINV Routed Systems 2011 sp2
I needed a specific Adobe font engraved on a nameplate.
I purchased and installed the font and it is available to me in other applications.
I went to use it within my sketch and it didn't display as being available.
Do I need to do something other than install the font on my machine to use it within my model?
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000
Wouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
See video. What can I do about that?
View 1 Replies View RelatedMy iLogic ability is quite limited outside of what I use regularly?
I am trying to change the font style in every text definition in all my sketch symbols in one go. Actually I have started it based on only a selection set but I would be happy with just all symbols too. Below is where I got to, I am stuck on the For Each line to cover each text box in the symbol. Some of the other syntax may not be right either but I can't test it all the way through.
Dim oDoc As DrawingDocument: oDoc = ThisApplication.ActiveDocumentDim oSheet As Sheet: oSheet = oDoc.ActiveSheetDim i As LongDim oSymDef As SketchedSymbolDefinition: oSymDef = oDoc.SketchedSymbolDefinitions.Item(i)Dim oText As TextBoxesFor i = 1 To oDoc.SelectSet.CountFor Each oText In ............oSymDef.TextBoxes.Item(i).FormattedText ="<StyleOverride Font='ARIAL'>...< /StyleOverride>"NextNextInventorVb.DocumentUpdate()
Also the XML style override is not complete if this is the only way to achieve this result.
Inventor Professional 2013, Autodesk Simulation Multiphysics 2013
Windows 7 x64 Core i7 32GB Ram FX2000
I’m trying to get the embossed text on a nameplate (done in sketch on a part) to change with updating a custom property in iProperties. Right now I’m using iLogic so I can change the text in User Parameters and that updates the embossed text. So where I’m having an issue is the Export Parameters tab is grayed out so I can’t get it work with my custom properties.
View 1 Replies View RelatedWhat I would like to do is create a custom dialogue for each of 3 or 4 standard sketch symbols we use on a regular basis. I'd like to load 'suggsted' values out of an excel spreadsheet and allow the user to pick from them or enter in a custom text string if required. The values would then become part of the sketch symbol.
I've spent some time looking into iLogic rules and I think I've determined that they're not flexible enough to do what I want.
If I'm correct, it is possible (or a good idea) to do this using a VBA macro? I'm a little hesitant to go down the full blown add-in route. While I'm pretty confident I could work it out.
When using the TXTEXP command to explode text in Map 2012, the resulting text/lines are 1/12th their original size and automatically move to a different location (see the attached jpg). This behavior occurs in all drawings being edited in Map 2012 (my colleague who is still using 2011 has no problems exploding text, and neither did I until I upgraded to the new version...)
Although the results are odd, they seem to be consistently odd in that 1) the text is always scaled down by 1/12th, and 2) the text/lines always move to the upper right hand portion of the view screen (Model or Paper space, doesn't matter), right below the Minimize/Restore Down/Close icons. Using the explode text command via the ribbon vs. typing it makes no difference. Fiddling with the original text properties (i.e. making it annotative, changing the orientation or Z coordinates, etc.) also makes no difference in the resulting lines.
how we can explode block with attributes and keep the text of attributes as is without changing to value
View 3 Replies View RelatedThis code works with no errors but does not change the text size. A user can over ride the text size (Font size) so I'm hoping it is possible thru code.
Dim oSketch As Inventor.Sketch
Set oSketch = oPartDoc.ComponentDefinition.Sketches("Sketch1")
Dim oText As Inventor.TextBox
Set oText = oSketch.TextBoxes.AddByRectangle(pnt1, pnt2)
oText.Style.FontSize = 0.1
I have created an attribute say 1 and made a circle and moved the attribute text next to the circle and now making a block including both text and circle but when the block is created the text disappears I have made sure to check the annotation on in both attribute and block creation. This is just happening in Autocad Map 3D 2012. Dont know why the text disappears but when i explode the block it is back.
View 9 Replies View RelatedHow could i explode text
I want to explode text in a particular font and then extrude
[URL]
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedI wrote this little piece of code (attached) that explode all the blocks in the current drawing.This is magical, compared with what we had to do in VBA.
This works perfectly but now I want to go deeper and managed blockreferences with attributes.Based on my code, I can determine if oBTR.HasAttributeDefinitions is true or false.
If the blockreference has attributes, I suppose I will have to use Explode instead of ExplodeToOwnerSpace.
My first question is, using explode, I need before to know in which space the blockreference is inserted (Model or any layout) so to insert the exploded entities correctly. So, is it possible from a blockreference to get its own SpaceId?
An another idea I had is to edit the blockreference (not the block definition) to replace attributes with text...
I am using AutoCAD 2012 (Electrical). I have a few blocks that I pasted in a drawing with text that is contained in attributes.
I would like to explode these blocks so that I can make some changes to them, but when I do this, I lose the text that is contained in the attributes. After exploding the blocks, I just see the attribute names rather than the text that they originally contained.
I hate to have to re-type all this info. If I could somehow choose to choose to convert the text originally contained in attributes to plain old static text, that would be perfect for me.
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Related