I have upgraded my inventor 2011 to 2012; I kept the 2011 inventor in my PC. Vault 2011 runs great I can log-in and out of local host on my 2011 version of the vault without any problem. I am having problem with 2012 vault log-in. in get error massage.
Autodesk vault 2012 is not compatible with the localhost.
curious and cant seem to locate it on the main website
View 3 Replies View Related"cannot connect to backburner manager localhost"... What can I do to resolve this problem? I can't export a movie of my finished product.
View 1 Replies View RelatedSo I've installed Smoke for Mac 2013.2 on my macbook and everything has been working great up until a day ago. Now when I go to localhost/ backburner no servers show up. When I try to import something into smoke with cache media enabled, I get the error "Cannot connect to backburner manager 'localhost' on port 0" Also my Backburner Manager seems to be stopped in the service monitor and everytime I restart it, it shuts back off again.
What I've tried
Going through "mikes_backburner_guide.pdf" and a few others to get the networking right. Uninstalling and reinstalling smoke 2013 multiple times and restarting my computer many, many times.
We are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies View RelatedWhen I get latest versions of files from Vault Explorer and then open them in Inventor, the vault status of the files in the Inventor browser shows a triangle with an exclaimation mark inside of it. When I move my mouse over the status icon, it says "vault not open". There is no response when I try to log into the Vault within Inventor.
I upgraded from 2009 to 2010 Inventor and Vault two weeks ago. Everything worked fine until today. Vault Explorer seems to be working fine. The ADMS console seems to also be working fine. I can do all the routine tasks in both programs. The problem is only in Inventor.
I am using the autodesk suit 2011. The problem I am having is when I copied a block from autocad using the copy command, then used the paste command in an inventor .dwg and it inserted as an autoCAD block. When I check the finished drawing into vault the autocad block does not show up and will not print.
View 2 Replies View RelatedWe have a user that has been experiencing problems when checking files into vault. The problem occurs when he copies a design (the drawing and part file) in vault then checks out the files to make changes, saves it and checks it back in, Inventor doesn't check in the changes. The preview window (i.e.. dwf that's generated on check in) is correct however the thumbnail is wrong and when you open the latest version none of the changes have been made.
This is taking up a lot of time because he has to make the changes twice and also has to be constantly looking back in vault to files he has just checked in to make sure they are correct.
We are a mid sized company the builds our parts from raw materials. Steel Coils, Steel tubing, Steel plate, etc.
We are have been migrating from MDT to Inventor over the last few years. We are now trying to implement Vault and integrate that data into our ERP system. We would like to model a part and assembly and check that into Vault then pass the BOM into our ERP system.
It all sounds good up until I looked at how our part files were structured. There is not BOM in an ipt that I have found phantom or referential. Here is my problem
It takes 1 lb of a .0625" thich steel sheet that is 6.5" wide. We stamp our product in a 200 ton press producing a finish componet.Problem 1- Part1.ipt (model of my stamping) does not have a lower level it is a component in Inventor there is no BOM that I have found.Problem 2 - Part2.iam uses part1ipt but we punch a hole in it and push material outward to create a lip so we can lap weld the next part.When I try to extrude this feature I can only cut the part I cannot add material or deform it in any way.Problem 3 - We also manufacture bent tubes. We consume 1.5 ft of part C to make part D. I cannot insert 1.5ft of a part that is 20ft long as we buy it. then we bend it. I cannot insert a 1.5ft part into an assembly and then bend it.
Major problem - even though I can change the dwg file or idw file to add a parts list Vault does not put this information in the Item master BOM.
I have opened Vault for the first time and I don't know how to access it, it wants a username/password/server/database. I am one of two people in the company how use inventor etc so there is no existing server/database within my company so I assume i have to set one up?
View 3 Replies View RelatedWe have a product line that relies heavily on iAssemblies. The main assembly and several layers of subassemblies are all iAssemblies. All the children that needed to be generated so far were added to the vault.
If I activate a different member in the main assembly factory, Inventor wants to update some of the various children. For some reason, vault won't prompt me to check out the children. I get a variety of errors, unless I manually check out the children.
There are at least 20 iAssemblies involved at different levels of this thing, not to mention all the iParts thrown in as well.
I'm using the free Vault that doesn't have a batch print option so I've been writing some code that does the trick.
The code lists open drawings, assemblies and parts, and depending onwhich is selected, displays a list of all the drawings associated with the file and it's sub-components.
Everything is good except that when the list of drawings is populated I am only able to search through the working folder for drawings. This means that if the drawing has been modified by another, or the drawing has not been opened on the local computer, it will not print (or print the old version).
Is there a way to pull the latest files from vault into the working folder automatically? Currently the only way this is possible is by selecting "Get/Checkout" in vault and downloading the files.
A customer has a problem with the add-in of Vault in Inventor. Log In and Log Out options are lost as shown in the picture. The machine already formatted and installed applications again but the problem continues.
View 9 Replies View RelatedI am making a copy design of a big file, two things I need to change manually which takes lots of time:
I need to change the status of files from Reuse to Copy, also I need to change the paths to the right ones as the paths that kick in by default when I change the main directory on the top are not right.
Is there a quick way of changing status of all the files to Copy, kinda shift and highlight or the way Vault renames files with Replace option? With big assemblies connected with 10 drawing files doing it all by hand.
I started using inventor when he started the job. I have been using Inventor for about 3 years now. My question is that I have always practiced good file management at every level of a project from single parts to large assemblies; however at this new job the file management is horrible, in the last 3 years the company has been through 13 different drafters, thus each drafter was saving files in different location and names making finding parts and assemblies a nightmare.
The problem I am having is that the lead designer is insisting that we implement vault, and that it will solve our problems, However I feel that we needed to develop a universal file and naming convention first, get our file hierarchy in order before we try and implement vault. There will only be 2 of us accessing the cad files and I don't think that vault would even be a good fit for our work flow.
We are trying to migrate our 2010 and earlier inventor files that exists in our vault 2012 professional fully replicated environment to The latest inventor release.
We are trying to utilize the task scheduler. but when attempting to use the "Migrate Files from Vault" and select the option to add folders. we receive several pop ups, one after another. The header states "folder" and in the message box is simply "1000" then an "ok" button.
After clicking ok a half dozen times the dialog finally comes up to select the folder, but the entire vault is not available in the selection window. I have tried this on several machines and 2 different databases. Same result.
I'd like to get the Vault file Id from an inventor document on the local workspace in order to be sure that it has been checked in (I want to be sure that all the files on the local disk have been checked in).
View 2 Replies View RelatedI search for a file in Vault 2014 and find it needs refreshing i.e. the double red arrows icon in "Vault Status" column. I hit the refresh button in the ribbon and the file still has the double red arrows icon and doesn't appear to refresh.
Inventor 2014?
I recently installed Vault pro 2013. I was running Inventor 2012 at the time.. My vault add-in stopped loading. I installed Inventor 2013 and the vault add-in still won't load. I've gone to the Add-in manager 2013 and set it to loaded. I hit the "OK" button and nothing. Open the manager up again and it says "unloaded". Something is going on that is not allowing my vault add-in to load.
View 1 Replies View RelatedI am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
the "place item from vault" icon is grayed out and not available for selection. how do a place a stock part located in the vault, into an assembly i am currently working on?
View 2 Replies View RelatedI have one computer that can't connect to the Vault Server. It use to work fine and I am not sure what happened. I have gone to the extreme of uninstalling and re-installing and still nothing. I am in the same project as when it was working. I have checked the Application Options Content Center and made sure that the Access Options is set to Autodesk Vault Server.
When I click on Vault Server, everything is grayed out except "Log In" and "Connection Options". If I click on either of them the dialog box goes away and nothing happens. No error dialogs nothing. If I go to the project amd click on the Configure Content Center Libraries button it just disappears and nothing happens. Not sure what else to do.
I actually have two separate but related issues.
The place component button on the ribbon seems to have inconsistent behavior. When using the drop down to place components from content center or Vault, sometimes the ribbon button will be "sticky" and remember my selection for the next component and sometimes it will revert to the default place from local. Is there any way to configure Inventor to treat Place from Vault as the default behavior? Probably about 75% of the time I am placing components from Vault; having to crank through extra clicks to get to Vault is a waste of time.
It seems to me that there is a major disconnect between using the Vault and using Frame Generator. When creating a frame using frame generator all the parts are automatically named by frame generator. It gives you a name such ANSI W8x13 00000001 for an I-beam for instance. As you create more components (I-beams in this case) the number on the end of the file name increases so you have 0000002, 00000003 etc. After I'm finished with the assembly I will check it into the vault.
The issue comes up when I go to create a new assembly a few days later using the same I-beam. The naming convention for the I-beam is exactly the same for the new assembly file. It will start over and give me a new ANSI W8x13 00000001 file. Now when I go to check it into the vault I get the "cannot check in due to vaulting restrictions" error because the two files have been named the exact same thing. It seems crazy that Inventor would be set up this way considering how vault works. The only thing I have found is that you can click the browse button and rename the file. This is a serious headache though because I have to come up with a unique name (or pre-fix) for EVERY part of EVERY frame that I generate. And lets just say it's not hard for me to create 100+ new parts a day using frame generator.
We are currently running Inventor 2010 Professional (64-bit) on our computers with Vault 2010 on a remote server, but are ready to upgrade to Inventor 2012 Professional. Will we be able to continue to use Vault 2010, or will our Vault (ADMS?) need to go to 2012 also?
A side question, what are the strategies to update the files in the Vault to 2012? As needed? Setup an automated task?
All of a sudden I see that within my Inventor the vault Collaboration ribbon has disappeared. How do I bring this back?
C1
Inventor Professional 2013
Vault Collaboration 2013
users using i-parts and i-assemblies with vault. The links seem to cause more problems than its worth. Assemblies that constantly want to be updated, rebuilt, parts lists on drawings using data from the wrong instance of the factory. etc.
View 9 Replies View RelatedHaving problem when using Inventor to check in a (large->slow) file while closing vault at the same time?
One of my colegues had a drawing file lose some of his changes when he checked in. we could not see a reason why, as the file was in vault with the correct time stamp. the file was the same as the previous check in.
This morning i have had a similar problem, where by i had made changes before checking in last night and when i opened the file in the morning the changes where not there.
I looked on my c drive in old versions (before i did anything else to overwrite it!) and low and behold the changes there!
The only thing i remember doing that was not normal was to close Vault while this large file was in the process of checking in through inventor.
When I open up Inventor 2014 the Vault tab is visible in the ribbon; however, when I create a new file (of any type) the vault tab disappears from the ribbon. I can retrieve it by right clicking on the ribbon, clicking ribbon appearance and selecting reset ribbon. This fix is only temporary because if I close out Inventor and re-open it I must go through the same steps to retrieve the Vault tab in the ribbon. Any way to make it stay in the ribbon so I don't have to reset the ribbon every time?
After digging a bit more I came across the answer: [URL]....
I have completed a part file with a family table defined in it. I check this part into vault. When I search for this part in vault it seems like it has taken the part number and the description from the first line in the family table and assigned it to the main part file. To me this is confusing because it looks like there are two items that are the same.
View 2 Replies View RelatedI am changing the PC on which i store my Vault. i have successfully installed vault server onto the new pc but cannot find a way to migrate the data from the vault on my old PC. I initially tried to restore vault from a backup but this was not successful. Can i just copy and drop the files into the same location on the new pc?
View 1 Replies View Related